Double Column Horizontal Bandsaw Line

BEHRINGER HBP 360 -704G

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Djdpfxoxdub Is Ah Njuu Distance between centers: 2000 mm Ø Swing over bed : 720 mm Ø Over carriage: 470 mm Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. Dusdpev U Ea Hofx Ah Nsu 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW Dsdpfx Aju Nfvuoh Nouu weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW Djdpfjd Iipmjx Ah Neuu weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Dusdpfjuyx Hzox Ah Nou

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Dedpfx Asg Ufvbsh Njuu Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2840 mm Dusdpfex D Rx Aox Ah Nsu Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Dodpfxjqw Akmo Ah Neuu

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Dodpfx Ahevrq U Dj Nsuu

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA Duedpfx Ajlf Iqnjh Nju - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm