Used Wheel Meat Saw for sale (26,055)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kolbe K430H Bandsaw for Meat and Bone (2020) Brand: Kolbe Foodtec Model: K430H Type: Floor-standing bandsaw (Standsäge) Year of manufacture: 2020 Power: 4.0 kW Voltage: 400 V (3-phase) Rated current: 8.6 A Cutting blade: 3700 x 16 mm Weight: 330 – 350 kg The Kolbe K430H professional bandsaw is a high-performance floor-standing machine designed for precise cutting of fresh and frozen meat, bones, and fish. The 2020 model features a robust stainless steel construction that ensures durability and compliance with the highest hygiene standards. Its 4.0 kW motor combined with the long cutting blade (3700 mm) enables fast and safe operation, even when processing hard materials. The unit is equipped with precise blade guides and an ergonomic worktable, ensuring high cutting repeatability and minimal product loss. Duedpfsyl Ip Nex Aaaop

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment: head saw, edger, roller conveyor, extraction system, sharpening machine, four-wheel drive forklift. Duedpjydvpzofx Aaajp

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Dsdpjtq Dl Tsfx Aaajup

Condition: good (used), Contactor, semiconductor contactor, contactor Dsdpfxeb A N Alo Aaasup -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece Duodob A N Akjpfx Aaajp -Quantity: 17 pieces available -Weight: 2 kg

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Dedpfxowck N Io Aaasup Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € With stand 2100 € Dusdpex Ndqrofx Aaajp

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Dusdpfxsx Ndqfj Aaasp

Condition: good (used), functionality: fully functional, BM Mixer 1500L Twin Shaft Paddle Mixer All stainless-steel Body Mixer capacity: 1500 L Type: Twin shaft paddle mixer Dusdpfx Aaoxxuayoaep Dimension: 2,500 x 1,800 x 2,000 mm Consumption: 20 KW Voltage: 400 V Total Power: 25A, 50 Hz Phase: 3 Compressed air: 6-8 Bar/ ca.250l/min

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. Dujdpfx Aoq Nf S Rjaaop 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Dsdpfx Aswxmhljaajup Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Dsdpofv Hphsfx Aaaeup Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Vesto saw with two discs for sale Dusdpfx Aastqt T Isajp - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: Dsdpfx Aaswq D Rbsajup MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Djdpfjwqcbfjx Aaaeup Powered by air- 6 bar Measurments: by client demands

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Dsdpsb Rnv Sofx Aaasup Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT Dodpfxod H Hmho Aaajup

Condition: good (used), Year of construction: 2014, 1 x Schroder IMAX 420eco Injector Year: 2014 Duedpfx Aewqnrvsaajp Located in Melksham, Wiltshire

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Dsdow Nbhmjpfx Aaaoup Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Duodpfxoypbx Ee Aaajp Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 800 mm, cutting width (max.): 1,500 mm, saw band length: 8,970 mm, saw band speed: 13,500 mm/s, section length (max.): 3,000 mm, Machine with large cutting capacity, ideally suited for continuous operation in steel construction! TECHNICAL DETAILS Cutting area rectangle: 3000 × 1500 × 800 mm Flywheel diameter: 620 mm Saw band dimensions: 41 × 1.3 mm Maximum saw band length: 8,970 mm Saw band speed: 310 – 810 m/min (infinitely adjustable) Automatic feed max.: 5,000 mm/min Manual feed max.: 6,000 mm/min Hydraulic tank capacity: 250 l Pump delivery rate: 40 l/min MACHINE DETAILS Duedpfx Aaeymw R Soasp Control model: CNC control EXOR PLC Saw motor power: 7.5 kW Hydraulic motor power: 11 kW Total power: 23 kW Machine weight: approx. 9,000 kg EQUIPMENT Hydraulic workpiece clamping Automatic or semi-automatic sawing operation Feed table / material feed Large flywheels for smooth running & long band life Heavy-duty industrial design Hydraulic and coolant unit integrated

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 12,105 h, load capacity: 1,500 kg, lifting height: 4,660 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 18x7-8 Rear tyre type: Superelastic Rear tyre size: 15x4/5-8 Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Habat Battery type: PzS Battery year: 2018 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our machines are workshop-inspected and tested in accordance with FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We also purchase your used units, even if you do not buy a machine from us. Hire purchase and financing at attractive conditions are available on request. We are happy to provide you with competent and detailed advice about our vehicles. Side-shift, third valve, front work lights, heater, full cabin, full free lift, interior mirror, windscreen wiper, single-pedal drive, LED lights, 3-wheel design, seat. Duodpfx Aajyr T Htoasp

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Dusdpfx Aexymd Hsaaop Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: new, mileage: 1 km, color: yellow, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, Gunter Grossmann GG09 + KUBOTA EURO 5 The new Günter Grossmann GG09 Loader The Günter Grossmann GG09 loader (900 kg load capacity) is the brand-new machine from Günter Grossmann, a high-quality machine engineered for a European company. This loader delivers outstanding power and is capable of performing reliably under all working conditions. The loader is extremely user-friendly and comfortable to operate. The control panel is clearly laid out, intuitive, and straightforward. The cab is soundproofed, insulated, and equipped with heating. Additionally, the machine features a comfortable and elegantly glazed cabin, ensuring both safety and operator comfort even during long shifts. The loader is built with a highly durable and robust construction. It comes standard with a quick coupler, allowing for fast attachment changes without leaving the cab. Additional equipment available on request: (Excl. VAT) Standard delivery includes: GG09 loader + bucket + quick coupler Model 900 kg Specifications Model: GG09 Load capacity: 900 kg Engine: Kubota Euro 5 (V1505) Rated engine power: 24.47 HP Number of cylinders: 4 Rated speed: 2400 rpm Operating weight: 2300 kg WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Djdpfx Aajvuk U Ajajup Lifting height: 2750 mm MAIN DIMENSIONS Overall length (bucket on ground): 4037 mm Overall height: 2264 mm Overall width: 1446 mm WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: Duodsxmk Ebopfx Aaaop - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...