Condition: new, functionality: fully functional, PRESSA IDRAULICA ELETTROMECCANICA 100 TON, FERVI P001/100EP400V Djdpfoznvbdjx Akvjwa

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. Dsdpfszlfb Ijx Akvewa FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa Dwodpfx Asy S Syaekvsa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Condition: good, little use

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Dwedpjzldwusfx Akvja Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Dodjzgzt Nspfx Akvowa Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Weight 12T

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Djdpfx Akjwlgr Rjvowa Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Dwsdeyilh Ijpfx Akvoa

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, model MBG 004.124. The machine features a pressing force of 40 kN (equivalent to approximately 4 tonnes) and is suitable for industrial press-fitting, joining, assembly, riveting, embossing, and staking operations. A key highlight is its current certification status: The machine remains certified until April 2027. Technical Data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press / Press-fit machine / Joining machine Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine/Electrical number: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Dwedpfx Asznkvpokvja Power: 0.2 kW Rated current: 0.5 A Back-up fuse: 16 A Protection class: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Certification valid until: 04/2027 Condition: Used The press operates with a total stroke of 200 mm. The actual power stroke is 80 mm, delivering a maximum pressing force of 40 kN. The machine is suitable for tasks such as press-fitting bushings, bearings, and pins, as well as for assembly, riveting, embossing, staking, and joining operations. Please refer to the images for the exact condition and scope of delivery. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional presses and industrial machines—both new and used—in our shop! PD

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Dwsdpfxei Amnpj Akvoa Location: Ex works - available for immediate delivery -

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm Dodpfx Aewuutbskvewa width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. Dwjdpfxoyylhao Akvja daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm stroke: max. 275 mm Dwodpfxegwv S Uo Akvea weight: 4.500 Kg.

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: Dwedoxabcwopfx Akvja - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 Dedpfx Akjuhb T Dsvewa - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] Dodpfxeuhb Twj Akvewa - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] Dwsdpfeuhb Tqex Akvsa - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo Dwedpfsuhb Tkox Akvea

Condition: used, Year of construction: 2022, machine/vehicle number: 042-005844/1, overall weight: 8,000 kg, This ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press is being auctioned off in our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You can find this and many other items on our platform. Further machine data: ZEULENRODA PRESSTECHNIK PYE 100 F hydraulic single-column press, serial number 042-005844/1, year of manufacture 2022, last service 10/2025, machine in operation until 12/2025 Technical data of the press according to the nameplate: Nominal pressing force: 1000 kN Dedpszk Ilasfx Akvowa Hydraulic pressure 260 bar Temperature range +15 to +35°C Nominal voltage 400 V Frequency 50 Hz Safety distance 192 mm Total weight 8,000 kg Functionality and technical data have not been tested Without further items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot is being auctioned off with reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you as soon as possible.

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Dwodpfx Aeuqc Agokvja Extended machine accessories

Condition: used, Year of construction: 2016, machine/vehicle number: 200-0052, overall weight: 26,000 kg, This ZEULENRODAER PRESSTECHNIK double-column press, type PYZ 250 F, is being auctioned online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology – Presses and Metalworking location. You can find this and many other items on our platform. Further machine data: Zeulenrodaer Presstechnik, type: PYZ 250 F, year of manufacture: 2016, machine number: 200-0052, rated pressing force: 2500 kN, last service: 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Rated force: 2,500 kN Dsdpfxjzk H Uaj Akvjwa Hydraulic pressure: 180 bar Permissible follow-up time: 97 ms Rated voltage: 400 V Frequency: 50 Hz Connected load: 100 kW Safety distance: 194 mm Machine weight: 26,000 kg Function and technical data are unverified Without further items/without additional accessories, unless explicitly stated as part of the item. WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot is being auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: used, Year of construction: 1989, machine/vehicle number: 00789901, This press line, featuring an ERFURT press, type PKZZI 800.1/3150x1600/500E, as well as a roller feed/material conveyor and alignment device, will be auctioned online as part of our industrial auction/machine auction – site closure of J&S GmbH Automotive Technology – Presses and Metalworking. You can find this and many other items on our platform. Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture: approx. 1989, 8000 kN, last service: 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min/-1 Dwsdpfx Akszk H Rnsvoa Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture: 2011 with coil 1 (sandwich processing), SAWAB coil, year of manufacture: 2011 with coil 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture: 2011 with coil 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial number: M2011-00170, year of manufacture: 2011 including enclosure GWS - Project No.: 2011 - 60187 with peripherals: - Conveyor belt - Raziol system Function and technical data have not been tested. Without further items/without further accessories, unless explicitly stated as part of the lot. WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! Subject to change This lot will be auctioned subject to change. After the auction has ended, the seller will notify within 2 weeks whether the highest bid will be accepted or not. We will inform you as soon as possible.

Condition: used, Year of construction: 2003, machine/vehicle number: CO5223, overall weight: 199,000 kg, This press line, featuring a MANZONI eccentric press, type T6302MR/2/12/TE, as well as a coil feed/material conveyor and straightening device, will be auctioned off in our industrial auction/machine auction (location closure of J&S GmbH Automotive Technology - Presses and Metalworking), online. You can find this and many other items on our platform. Further machine information: MANZONI T6302MR/2/12/TE, eccentric press, year of manufacture 2003, SN: CO5223, with SIMATIC HMI control, last maintenance 10/2025, machine was in operation until 12/2025 Technical data of the MANZONI press according to the nameplate: Nominal force - 6,300 kN Nominal stroke before and after TDC 12.7 mm Max. tool dimension 4000x1700 mm Max. tool upper part weight 13,500 kg Flywheel speed G/1' 660 Stroke rate min-max C/1' 10-45 Max. clutch cycles 15 Ram stroke min-max 0-600 mm Ram adjustment 200 mm Installation height 1100 mm Dwell time 0.6 sec Safety distance 815 mm Weight 199,000 kg Coil feed system consisting of: GSW Schwabe, Type: MHR5/1500 SN: M 2018 - 00981, Year of manufacture 2018 GSW Schwabe, Type: LMHR 1000 SN: M 2018 - 00982, Year of manufacture 2018 PBK unwinder, Type: EV 120/800, max. load capacity 10,000 kg SN: BA00862, Year of manufacture 2003 including hydraulic unit, enclosure and roller conveyor GSW - Project No.: 2018-60025 with additional peripherals: - Control cabinets - Lubrication system Function and technical data are unverified without further items/without further accessories, unless explicitly stated as part of the item Djdpfx Akozk H Iyovswa WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot will be auctioned off subject to change. After the auction has ended, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: used, Year of construction: 2015, machine/vehicle number: M01365/400/23/038/14, This Schuler eccentric press MC4000 will be auctioned online as part of our industrial auction / machine auction, location closure J&S GmbH Automotive Technology - Presses and Metalworking. You will find this and many other items on our platform. Schuler Beutler, Type: Eccentric Press MC4000, Serial No.: M01365/400/23/038/14, Year of Manufacture: 2015, 4000kN, last service 10/2025, machine was in operation until 12/2025 Technical data of the press according to the nameplate: Mains voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J Dwjdpfx Akjzk Hycovea max. strokes in continuous operation: 20-80 min/-1 max. strokes in single stroke: 30 min/-1 max. clutch cycles in single stroke per minute: 20 After-running time: 0.207 sec min. safety distance: 332 mm min./max. clutch pressure: 5.0/6.0 bar System pressure: 8.0 bar Stroke lengths: 40-315 mm maximum punch adjustment: 200 mm usual connection point of the punch: OU max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1500 mm max. tool dimensions: 3000 x 1300 mm max. weight of tool upper part: 3,000 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, GSW Schwabe, Type: RMA 50/78, Zehnder & Sommer, Type: EV 520 AGM including enclosure and roller conveyor Year of manufacture: 2015 GWS - Project No.: 2014 - 60376 with peripherals: - HIESSL lubricant system - RAZIOL EST-10D/ELS-4000 - RAZIOL DOS SPR EBAD-4000KL / Lama 1000 HL - GÜTHLE CT10/2500 pair, maximum load capacity per pair 10,000 kg Function and technical data are unverified without further items/without further accessories, unless explicitly mentioned as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! Subject to change This lot will be auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, This SCHULER eccentric press MC 400 will be auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You will find this and many other items on our platform. Further machine data: Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Mains voltage: 3LNPE/400V/50Hz Control: CCS/PNOZmulti Fuse rating 250 A Rated power 75 kW Rated force 4,000 kN Working capacity 60,000 J max. strokes in continuous operation 20-80 min/-1 max. strokes in single stroke 30 min/-1 max. clutch cycles in single stroke per minute: 20 After-run time 0.20 s min. safety distance 322 mm min./max. clutch pressure 5.5/6.0 bar System pressure 6.0 bar Stroke lengths 40-315 mm maximum punch adjustment 200 mm usual connection point of the punch: OU max. installation space, largest stroke in UU: 750 mm Table dimensions 3000 x 1400 mm max. tool dimensions 3000 x 1300 mm max. weight of the upper tool part: 2,800 kg Weight without additional equipment: 72,000 kg Dsdpfx Akjzk Hr Ejvowa Strip feed system consisting of: GSW Schwabe, Type: MHR 5/2000, SN: M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, SN: M 2018-01119, Year of manufacture 2019 including hydraulic unit, enclosure and roller conveyor GSW project no.: 2018-60420 with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N set of 2, year of manufacture 2019 - Control cabinet Function and technical data not checked without further items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot will be auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid will be accepted or not. We will inform you promptly.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Dwodezk E A Aopfx Akvoa Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg