Year of construction: 1998, Condition: ready for operation (used), A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible. Dob Hhjv Scrnezu Njkl

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. Dobjv Saxrj Hhzu Nskl The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR).

Condition: new, pressing force: 100 t, distance between stands: 1,500 mm, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm Dkeb Heru Dirohzu Nol - Working width 1500 mm - Cylinder is movable - pressure gauge - Emergency stop - 400V

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Dkeb Hhsuqd Tmozu Njl Standard configuration The press was converted to CE standard in press was converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, Equipment: second-hand vehicle warranty, TECHNICAL CHARACTERISTICS: Dob Hhzuev R S Uvj Nskl Press Model: T40 CE Year of construction: 1999 Nominal force: kN 400 Nominal stroke: mm 2.6 Adjustable stroke: mm 8÷78 Stop position: TDC Ram adjustment: mm 60 Stop time: ms 110 Safety distance (1.6 m/s): mm 177 Strokes per minute: N° 145 Max. insertions per minute: N° 55 Max. surface mould: mm 300x500 Max. Height of closed mould: mm 332 Min. Height of closed mould: mm 297 Upper mould mass: Kg. 40 Installed power: KW 3.05 Voltage: V 400 Auxiliary voltage: V 24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 1,950 Complete with user manual and CE conformity Six (6) month warranty on mechanical parts Twelve (12) month warranty on the electrical panel NEW COMPONENTS INSTALLED: • Electrical panel; • Pedals; • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Motor pulley; • Air regulator; • Overload disk; • Reinforced surface on CNC machine

Condition: good (used), Year of construction: 2002, total height: 2,200 mm, overall weight: 2,000 kg, total width: 1,250 mm, working width: 165 mm, total length: 1,400 mm, pressing force: 25 t, cylinder stroke: 135 mm, piston rod diameter: 90 mm, pressure: 300 bar, piston diameter: 105 mm, inner dimension width: 145 mm, cylinder diameter: 105 mm, DR. Fritsch CSP 100 Compact Sintering Press Machine Type: Sintering Press Year: 2002 (Installed in 2004) Condition: Very Good (Decommissioned) Includes Manual Description For pressure sintering of metal bonds, ceramic bonds and synthetic resins Main features: Entry-level sintering press Precise control of sintering parameters (temperature, pressure, time). Flexibility: Shortest cycle times due to direct heating of the mould (typical sintering time depending on product: 15 - 45 min). Can also be used for the smallest sintering surfaces. Low graphite costs: Closed inert gas device. Simple operation: Touch-screen control panel. Variable input of pressing parameters via hydraulic pressure (bar). Programmable control with the option of saving complete sintering programs Easy maintenance due to good accessibility of the main components. Technical Specification Pressing force - normal switching: 26– 255 kN Effective pressing area of cyl.: 86,6 cm² Oil pressure: 30 – 300 bar (3,0 – 30 MPa) Graphite electrodes dimensions (WxDxH): 165 x 145 x 40 mm Internal Dimensions: 390x370x360mm Max./min. opening height: 150 / 15 mm Cylinders: 1 Cylinder Diameter: 105mm Cylinder Stroke: 135mm Piston Rod Diameter: 90mm Djbjv R E N Ho Hhzu Nskl Specific resistance: 12 – 14 µΩm Temperature control (single-channel) thermocouple Ni-Cr-Ni: 0 – 1.200 °C Total electric power: approx. 81 kVA Max. heating power: 79 kVA Supply voltage: 3 x 400 V, 50/60 Hz Total electric load: 3 x 120 A Cooling water consumption: approx. 90 l/min (at 20 °C) Recommended water supply temperature: 15 – 25 °C Water pressure: 2 – 4 bar Differential pressure (supply – discharge): 1 – 2 bar Inert gas consumption: approx. 500 l/h Inert gas pressure: 1 bar Inert gas types: nitrogen, forming gas (max. 5 % H2), noble gas Dimensions: 1400x1250x2200mm Weight: 2000kg

Condition: good (used), Functionality: fully functional, total height: 2,650 mm, total width: 950 mm, total length: 1,900 mm, pressing force: 160 t, table width: 800 mm, table length: 700 mm, operating speed: 20 mm/s, overall weight: 6,900 kg, reverse speed: 63 mm/s, ram plate width: 400 mm, ram plate length: 400 mm, ram stroke: 500 mm, type of input current: three-phase, clearance between the columns: 630 mm, retraction force: 40 t, Hydraulic press PYE 160 x 355. Manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 160 tons. Return stroke force 40 tons. Working pressure 12.5 MPa. Upper table 400 x 400 mm. Lower table 800 x 700 mm. Clearance 630 mm. Cylinder stroke 500 mm. Down speed 20 mm/sec. Up speed 63 mm/sec. Power requirement 7.5 kW. Weight 7000 kg. Height 2650 mm, Length 1900 mm, Width 950 mm. The machine has a new piston sealing package. It is possible to inspect and check the machine in motion. Dkeb Hhzuev Rx R Ds Njl

Year of construction: 2023, Condition: new, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. Dkob Hsfh R Nyohzu Njl The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Condition: new, - Cylinder stroke 400 mm - Working width 1200 x 450 mm - Cylinder is movable - Pressure gauge Dkjbsgg Nygs Hhzu Nsl - With V-blocks - Emergency stop - Weight 2250 kg - Motor power 7.5 kVA - Documentation - 400 V

Condition: good (used), Type BV 25/ P (with extendable lower table) Technical data: Closing force 18 tons Opening force 20 tons Lifting speed adjustable approx. 0 - 1 m/min . Djb Hhzev Eybyeu Njkl . Extendable table size 800 x 660 mm Upper part pivotable .

Condition: used, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec Dksb Hhzusv Rgwxe Nel feed up 125 mm/sec max. distance table - ram 1000 mm total power requirement 17 kW weight of the machine ca. 7 t

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, total height: 2,300 mm, installation height: 400 mm, total width: 1,620 mm, total length: 2,240 mm, pressing force: 61 t, table width: 450 mm, table length: 450 mm, overall weight: 3,800 kg, ram plate width: 160 mm, ram plate length: 160 mm, ram stroke: 150 mm, type of input current: three-phase, stroke distance: 150 mm, input voltage: 400 V, Equipment: documentation/manual, DR. Fritsch DSP 515 Pressure Sintering Press Machine Type: Pressure Sintering Press Year: 2008 Condition: Very Good. Decommissioned Includes Manual Technical Specification Main Cylinders: 1 Cylinder Diameter: 160mm Cylinder Stroke: 150mm Piston Rod Diameter: 140mm Effective Pressing Surface: 201.1cm2 Auto Pressure Control: 60-603kN Internal Dimensions: 450 x 450 x 400mm Self Baking Electrodes Dimensions: 180 x 180 x 60mm Inner Width of Electrodes: 145mm Temperature Range: 0-1,100 Deg C Sintering Mould Height: 60-120mm Sintering Surface: 150cm2 Total Connected Load: 155kVA Total Supply Voltage: 3 x 400V 50/60cps Total Nominal Current: 3 x 224A Operating Voltage: 3 x 400V 50/60cps/ 1 x 230V 50/60cps Control Voltage: 24V DC Cooling Water Consumption: 120-150L/min Water Quality: Drinking Water Recommended Water Supply Temp: 15 - 25 Deg C Water Pressure: 2-4 Bar Differential Pressure: 1-2 Bar Compressed Air Consumption: Approx. 20L/min Air Pressure: 4-6 Bar Protective Gas Consumption: Approx. 300-1000L/h Gas Pressure: 1-5 Bar Dimensions: 2240x1620x2300mm Dsbjv Rz Ifo Hhzu Nokl Weight: 3800kg

Condition: new, Year of construction: 2025, Functionality: fully functional, Machine Model:HMG-200JM1815 1:Servo hydraulic motor 2:Magnetic table Specification: Dkeb Hhjug T Rxozu Nol Clamping force: 2000KN Table size:1800*1500mm Maximum mold weight:20000 Kg Machine weight:32000kg Machine size:6200*2750*5800mm

Year of construction: 2012, Condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Dkeb Hhjv N I Agszu Nel

Condition: new, overall weight: 1,000 kg, pressing force: 100 t, cylinder stroke: 400 mm, clearance between the columns: 1,010 mm, - Capacity 100 tons Dksb Hhzor Ei Szou Njl - Cylinder stroke 400 mm - Working width 1010 mm - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: ready for operation (used), Year of construction: 1958, Functionality: fully functional, machine/vehicle number: 52/58, ram adjustment: 140 mm, pressing force: 250 t, ram stroke: 190 mm, plate thickness: 24 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 250 t Max. sheet thickness: 24 mm Stroke rate: 30/min Dkob Hhzuev N Iqde Nsl Ram stroke: 40 - 190 mm Ram adjustment: 140 - 65 mm Further information according to the manufacturer - without guarantee Table: 850 x 800 mm Ram: 600 x 520 mm Dimensions: 1,270 x 2,920 x 3,000 mm

Condition: used, Year of construction: 1995, pressure 100 t throat 300 mm Dkjb Hhzjv Rgwrju Nsl stroke 10 - 100 mm no. of strokes 100 Hub/min ram adjustment 60 mm daylight, max. stroke above - ram adjustment above 490 mm table surface area 900 x 600 mm hole in the table 300 x 200 mm T-slots 4 T-slot - width 22 mm ram surface 440 x 235 mm tool shank hole (depth x diameter) 85 x 50 mm total power requirement 5,5 kW weight of the machine ca. 5,8 t dimensions of the machine ca. BxTxH 2,2 x 1,65 x 2,6 m - Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE

Condition: new, Offered is a new ELBA hoist bucket, with rope and brake. 1 m³, track width 2.08 m. Dksb Hhzuev N H I Ue Njl

Condition: new, Year of construction: 2025, Table size 1200x1000mm Pedal rotates up to 180 degrees Table extends up to 1000 mm Table can be rotated 180 degrees around its axis Table can be raised up to 75 degrees Downward speed 1-10 mm sec. Upward speed 25 mm sec. Maximum open height 1300 mm Stroke 800 mm Table moves at 30 mm/second Weight 11.5 t Height 3000 mm Width 2900 mm SIEMENS S 7 1200 Complete hydraulics from BOSCH REXROTH Complete control cabinet technology from SIEMENS Dsb Hhzsv N D Ncou Njkl Manufactured under German supervision in Brazil, CE compliant

Year of construction: 1979, Condition: ready for operation (used), Pressing force: 110t, working length: 3000mm, stand distance: 2500mm, throat depth: 250mm, stroke: 100mm, installation height: 350mm, table height: 900mm, table width: 200mm, power: 11kW, weight: approx. 8500kg, operating hours: 89610h. On-site inspection is possible. Djb Hhzov N I Aaju Njkl

Condition: good (used), 4 x eccentric press Ebu / Weingarten Dob Hjq Rdr Tohzu Nekl consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 The machines can be inspected on site.

Condition: ready for operation (used), Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 2637, pressing force: 160 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 1,600 kN Motor power: 4 kW Safety distance: 110 mm Overtravel: 13 mm Lubrication system: Available Manufacturer: Eckardt Operation: Two-hand operation Leveling machine Manufacturer: Kohler Type: HVZ3/350 Serial number: 100014 Year of manufacture: 1981 Roller conveyors Number: 2 Dimensions: 300 x 2,000 mm Further information according to the manufacturer - without guarantee Pressure capacity: approx. 160 t Column width: 850 mm Ram surface: 800 x 700 mm Stroke: 400 mm Dkjb Hhzuev N Ifbs Nsl Ejector stroke: 300 mm Table surface: 800 x 700 mm Dimensions W x D x H: 1,800 x 1,800 x 4,200 mm Weight: approx. 12 t

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). * Dobovt Nvps Hhzu Nokl

Year of construction: 1985, Condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) The machine is in good condition and is sold for lack of space. The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Travel Y 1000mm Stations 16 Djb Hhzusccl N Se Njkl Machining up to 6mm aluminum Machining up to 6mm steel Machining up to 3mm CNS

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, retraction force: 100 t, Equipment: safety light barrier, H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 200 TON H TYPE SERVO HYBRID HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 200 TONS CAPACITY (POT) 100 TONS MAIN TABLE SIZE 1000 x 800 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 600 mm STROKE (POT) 200 mm MIN. OPENING HEIGHT 200 mm MAX. OPENING HEIGHT 800 mm STRESS RELIEF after WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar MOTOR POWER 30 kW – HAWE – SERVO MOTOR FREE FALLING SPEED 150 mm/sec. PRESSING SPEED 15 mm/sec. ASCENDING SPEED 200 mm/sec. RAM CYLINDER DIAMETER Ø 320 mm – Ck45 Dksb Hhzujv D Rv Ej Nel POT CYLINDER DIAMETER Ø 230 mm – Ck45 AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 4400 mm PRESS DEPTH 1800 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1150 mm ENGINE Protection Class IE3 PRESSURE FILTER PARKER USED VALVES HAWE FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATION ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL PLC SIEMENS S71510 TOUCHSCREEN PANEL SIEMENS KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS PILZ– 2 pc. APPROXIMATE WEIGHT 10 TONS