Used Horizontal Hydraulic Press for sale (31,419)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Ijdezb Il Njpfx Ahyoih Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment Iiedez A R Irepfx Ahysh - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t Isdpfx Aetndu Ushyeih CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 Iisdocmat Uepfx Ahyoh pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, total length: 2,100 mm, total width: 1,100 mm, total height: 3,200 mm, Year of manufacture: 1976 Colour: Green Empty weight: 6.000 kg - Year: 1976 - Documentation available: Yes - Serial number: 8753 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 63 - Max. stroke [mm]: 560 - Table length [mm]: 640 - Table width [mm]: 640 - Ram length [mm]: 555 - Ram width [mm]: 555 - Max. opening height [mm]: 350 - Transport dimensions: 2100mm x 1100mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Iijdpjz R Ehwsfx Ahyeh

Condition: used, Colour: Green Empty weight: 8.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Isdszxhxispfx Ahyjih Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Iodpfxez Rk Nyj Ahyoih 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Iijdpfx Ahsyilh Ioyeh

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Ijdpswndnuefx Ahyeih Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) Iedpfxjz Sva Hs Ahyoih - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS Iiodpfx Aez Hcz Sohysh - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Iiodpfxsz Tdbhe Ahyjh Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller X & R axis auto set , Z axis manual set Light guard

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 270 mm, oil tank capacity: 400 l, total length: 1,200 mm, total width: 1,100 mm, overall weight: 7,500 kg, year of last overhaul: 2026, LAUFFER double-acting hydraulic press, 100/30 tons. The press has been completely refurbished and has not been used. I am also including 400 liters of hydraulic oil, so it is ready for use. For more information and a video demonstrating its operation, please contact the phone number provided. Iedpfx Ahoz Hc A Njysih

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Iiodpfez R Nupox Ahyeh Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request Iijdpsu Axfcsfx Ahysh -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: Iisdszryy Sepfx Ahysh - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10150, General Description For sale is a professional assembly press manufactured by the Spanish company Enginyeria Teknics Sabadell, S.L. This unit dates back to 2014 and is factory-designated as "PRENSA REAR WAVE 2". The machine is equipped with an advanced electromechanical actuator (pressing module) from KISTLER, with a nominal pressing force of 60 kN. This system is designed for precise pressing, assembly, and force testing processes in industrial applications. Technical Data (TEKNICS Press) Manufacturer: Enginyeria Teknics Sabadell, S.L. (Spain). Machine Number: 10150. Serial Number: 338.003 6775. Year of Manufacture: 2014. Power Supply: 400 V / 50 Hz. Power: 25 kW. Required Pneumatic Pressure: 6 bar. Machine Weight: 800 kg. Certification: CE marking. Ijdpjz Rz Rhefx Ahyeih Technical Data (KISTLER Actuator) Manufacturer: KISTLER (Dr. Steiger Mohilo+Co GmbH). Type: 2151B60304002. Model: NCFH 60 400 300 B H C G. Nominal Force: 60 kN. Serial Number: 2683373. Actuator Weight: 87 kg. Certification: CE marking. Construction and Equipment Stable construction with a dedicated protective enclosure consisting of black mesh panels and yellow profiles. The operator's work area is protected by optical safety barriers (light curtains). The work area features a massive mounting plate with threaded holes and a set of tools, dies, and adapters to facilitate part positioning. A free-standing control cabinet is included with the press. The cabinet door houses the operator panel (HMI) with a display, the main power switch, and an emergency stop button.

Condition: used, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Year of manufacture: 1967 Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Iisdpfx Ahezry Icjyjh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, PYE 250 S1 hydraulic press. Iiodpfxoz Tc U To Ahyjh

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Iiedpfx Ahsz Saqqjyeh

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). Iiodpfx Asz Snrnehyoh The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Iedegrkigopfx Ahyeih Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Iisdpfx Ajv E Efdshyoh Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, For sale: Energo hydraulic NC press - Type: GTVS 400 NC - Year of manufacture: 2008 Ijdpfx Asz Iymnohyeih - Serial no.: 461/08 The hydraulic press is in like-new condition. It has 5,000 operating hours and has been used at minimal pressures, with a maximum force of 50 tons. It has been regularly serviced by the manufacturer, Energo. It offers high precision, with a ram depth accuracy of 0.01 mm and the capability for multi-step simultaneous programming, allowing you to set the depth, pressure, and pressing speed. It is connected to the power supply and ready for operation.

Condition: excellent (used), For sale: a Lukas press in very good condition. Isdpfxoz Sb N Ie Ahyoih