Used Zwick for sale (22)

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 Knedpfezizrkex Ahgsb For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Knjdezizlqopfx Ahgeb Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Zwick / Roell Type: LTM10 Maximum testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Knodpfx Ahezh D R Hogjb Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without force sensor: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance instructions, partially performed by Zwick/Roell Accessories: Screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Zwick / Roell ProLine Z005 Universal Testing Machine Knedpezfy Ivjfx Ahgsb Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Machine Type: Universal Testing Machine / Material Testing Machine Maximum Testing Force: 5 kN Load Cell: Xforce P 5 kN For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile, compression, and material testing in laboratories, quality assurance, research, and development. Technical Data Machine dimensions approx.: 917 x 439 x 1331 mm (W x D x H) Testing width: approx. 440 mm Frame width: approx. 720 mm Frame installation width: approx. 770 mm Machine weight approx.: 200 kg Power connection: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Made in Germany Load Cell Type: Zwick Xforce P Rated force: 5 kN Measurement start, Class 1: 20 N Measurement start, Class 0.5: 100 N Nominal measurement travel: 0.06 mm Protection class: IP54 Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Weight: approx. 0.65 kg Connection thread: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Measuring Module Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measurement value Measurement value acquisition rate: max. 10 kHz Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Machine electronics PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Research and development Laboratory applications Scope of supply Zwick / Roell ProLine Z005 universal testing machine Xforce P 5 kN load cell DCSC measuring module PC system / software as shown in the pictures Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Changes and errors in the technical data and prior sale reserved.

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S Knedpjzcpwpsfx Ahgeb The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. This ensures accurate and repeatable test results. Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Knjdpsykpamsfx Ahgeb Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Ksdpfxsxw N Uvo Ahgsnb Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Knedjzil Uiepfx Ahgob Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Kjdpfx Ahezii Ugegjnb Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Knedpfszil Upex Ahgeb Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression: 2.5 kN Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Knjdpfszdry Isx Ahgsb Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Ksdpfszil Ucex Ahgsnb Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Knjdpfjzwvtxex Ahgsb Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table-top testing machines Kjdpfx Aezdryzshgenb Zwick with a maximum force of 1.0 kN. Stroke length: 1150 mm. Testing speed: 0.1 ... 1800 mm/min Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a Zwick / Roell tensile testing machine, a tabletop testing machine. Zwick / Roell materials testing machine BDO-FB0.5TH Testing loads in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of the test area: infinite Test area depth: 100 mm Max. working stroke without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Knodpfjzdr Hnox Ahgob Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Zwick / Roell Zwick Indentec Hardness Tester Type: 4150DLC-A Knodpozh D Rasfx Ahgob Technical Specifications: Available test forces: 60, 100, and 150 kgf Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/PE + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software Kedpfx Ahezra Rqogenb 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Knodpfx Aszimgtohgob Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Year of construction: 2005, condition: refurbished (used), We are offering this ZwickRoell 1484 200KN tensile and compression testing machine, manufactured in 2005, which has undergone a complete overhaul. Manufacturer: ZwickRoell Model: 1484 Kedszw N Hlepfx Ahgonb Year of manufacture: 2005 Condition: refurbished Category ID: 407 Machine type: 200KN tensile and compression testing machine Types of tests: Tensile and/or compression Testing space: 2, top and bottom Capacity: 200KN Accessories: Included, in particular the mechanical grips The machine will be equipped with a new control cabinet with DOLI technology and testing software compliant with ISO 6892-1. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + Knjdpfx Aozwvu Nohgob PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Knodpfszpw Hdox Ahgsb Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: refurbished (used), functionality: fully functional, Testing method: Vickers Testing forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Knededmz Uzspfx Ahgeb Scope of supply: - Hardness testing device - Diamond indenter 136° Vickers - LED lighting - Cross slide table 135 x 135 mm - Objective revolver - Objectives 20X / 40X / 60X Optional: - VMS3 (Video Measuring System) - Digital micrometer screw - PC system