Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) Fpedpfx Ajzrpn Eskvek 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x)

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t Fpodpfx Akozrpulevok ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t Fpsdpfx Akjzrpr Revjk dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Year of construction: 2015, operating hours: 20,652 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: S7-300 PLC, overall weight: 10,500 kg, total width: 2,405 mm, total height: 3,029 mm, pressing force: 357 t, table length: 1,290 mm, table width: 1,200 mm, Hydraulic press manufactured in 2015. This WINTER VSP 350 features a holding force of 3500 kN and a trimming force of 2500 kN. It offers a holding stroke of 50 mm and a trimming stroke of 100 mm, ensuring efficient operation. With a robust table size of 1290 x 1200 mm, this machine is designed for heavy-duty tasks. If you are looking to get high-quality pressing capabilities, consider the WINTER VSP 350 hydraulic press we have for sale. Contact us for further details. MACHINE • Holding Stroke: 50 mm • Holding Speed at 500 kN: approx. 30 mm/s • Holding Speed at 3500 kN: approx. 4 mm/s • Holding Return Speed: 60 mm/s • Trimming Force: 2500 kN • Trimming Stroke: 100 mm • Trimming Speed at 500 kN: approx. 30 mm/s • Trimming Speed at 2500 kN: approx. 5 mm/s • Trimming Return Speed: 60 mm/s • Impact Damping Stroke: 20 mm • Opening Width: 1000 mm Fodpfx Ajzcw I Aokvepk • Machine Depth: 1230 mmHYDRAULIC UNIT • Hydraulic Unit Weight: 13000 kg • Pump Power: 2 × 15 kW • Cooler Power: 3 kW • Pump Unit Power: 3 kW • Hydraulic Pipe Diameter: 2 × Ø38 × 4 mm • Hydraulic Pipe Diameter: 2 × Ø30 × 4 mm • Hydraulic Pipe Diameter: 1 × Ø20 × 3 mm • Colour Hydraulic Unit: RAL7004 • Rated Voltage: 400 V • Frequency: 50 Hz • Rated Current: 97 A • Installed Power: 36 kW • Operating Hours Hydraulic Unit 1: 20652.8 h • Operating Hours Hydraulic Unit 2: 20641.8 h • Operating Hours Hydraulic Unit 3: 20802.8 h

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. Fsdjx Ehmyepfx Akvjpk It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Fsdpfoztpnzox Akvspk Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Fedpfoztpnhex Akvspk Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Fpjdpfx Ajztpfgokvjk Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Fsdpfx Aewbtn Rokvopk Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Fpjdpfx Aezq Sdyokvek Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Fpsdpfszb Il Nex Akvok Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm Fpsdpfx Akjztfbwsvjk -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm Fjdowir Dgspfx Akvopk 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 104800 € 1980.72 € 150 to 500 mm Fjdpfxswirl Re Akvjpk 950 x 650 mm 1200 x 750 mm 750 mm 100 mm/s 5,5 mm/s 165 mm/s 11 kW 2200 mm 2200 mm 3650 mm 9500 kg 254 bar 32 to 200 mm 120 mm 160 bar 40 mm/sec. 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to "CE" rules

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 80100 € 1513.89 € 60 to 350 mm 550?850 mm 600?1000 mm 600 mm 100 mm/s 10 mm/s 165 mm/s 11 kW 1950 mm 1900 mm 2850 mm 5350 kg 170 bar 24 to 150 mm 100 mm 156 bar 65 mm/sec. 470?650 mm light curtain cushion manual and automatic working Fedpfxjwiqz Re Akvepk manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to "CE" rules

Condition: used, Year of construction: 1980, Arisa press with 40-ton pressing force Fpjdsyyq H Uspfx Akvek

Condition: ready for operation (used), Mechanical spindle press / four-column press Fodpfx Aozta Tuskvspk -Four-column press -Table size, see images -Pressing force approx. 40 tons Dimensions: L x W x H 1.5 x 1.5 x 2.0 meters / Weight 700 kg Errors and omissions excepted.

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Fodpfxszqzd Ne Akvspk

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Fedpozqzd Aefx Akvjpk

Condition: ready for operation (used), Jenny ERP-25 straightening press Technical data: Fpedjzfx Iuepfx Akvsk 25 tons of straightening force, ram stroke 150 mm Series 86.545 Weight 1,300 kg Note: Fully functional, including straightening unit for shafts.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 100,000 kg, year of last overhaul: 2025, ATTENTION: The machine is currently disassembled. Individual components can be inspected. Before delivery in 2026/2027, the machine will be completely overhauled mechanically and electrically. Pressing force: 4000 kN Fodpfxsw H Ag Tj Akvepk Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Stroke rate: 15 - 60/min Working height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New control system: SIEMENS S7 1500 series

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). Fsdpfx Aszqtzmjkvepk The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Prices exclude VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: used, functionality: fully functional, The press is operating. Fedpezr Hddefx Akvspk

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Power 800 tons Slide stroke 900 mm Approach speed mm/sec 400 mm Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Fodpfx Akjwiidwevjpk Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm workpiece height max. 200 mm Control Simens Simatic MultiPanel weight of the machine ca. 6 t dimensions of the machine ca. 4000x1700x3250 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar Fpodpfx Asyan N Sokvsk