Condition: excellent (used), functionality: fully functional, machine/vehicle number: 4868, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Hfedpfxjw T S Tzo Ag Dor Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Year of construction: 2012, condition: ready for operation (used), This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. Hfjdjx E Ea Hjpfx Ag Djr Application Types Stamping

Condition: used, Year of construction: 1990, pressure ca. 20 t Hfodpfx Ajx E Dt Sog Dor

Condition: excellent (used), Year of construction: 1995, pressure 100 t table length 1.300 mm table width 1.000 mm max. table loading capacity 8.000 / 4.000 kg dist. between pillars (left to right) 1.050 mm dayligth 1.100 mm stroke 1.100 mm pressing speed 50 mm/sec return capacity 40 t voltage 400 V total power requirement 10,0 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 3,95 x 2,35 x 4,03 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table Hedpfx Aev Sdy Hjg Dofr no swiveling 10t / swiveling 6t d lower table 22t

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min Hsdpfxob A Hwhe Ag Defr -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread Hfodpfx Aewki Apjg Dsr - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, total height: 1,850 mm, total width: 1,750 mm, total length: 750 mm, Empty weight: 2.000 kg Price: On request Kraftformer - Powerformer 6mm Steel - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 3.0kW - Throat depth: 600mm - Min. stroke: 8mm Hsdpox Ek R Djfx Ag Defr - Model: Eccentric - Height adjustment: 80mm - Transport dimensions: 750mm x 1750mm x 1850mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Hsdpfsuhm I Hsx Ag Dofr

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23.05.5021, table width: 700 mm, table length: 500 mm, overall weight: 3,500 kg, pressing force: 61 t, stroke length: 100 mm, TECHNICAL DETAILS Nominal force: 600 kN Single stroke: 32 strokes/min at 1,400 rpm Continuous stroke: 65 strokes/min at 1,400 rpm Distance ram–table: min. 265 mm / max. 365 mm Stroke: 0 – 100 mm Die depth: 250 mm Table dimensions: 500 x 700 mm Tool dimensions: max. 215 x 340 mm MACHINE DETAILS Air pressure: min. 4 bar / max. 6 bar Drive Motor power: 5 kW Motor speed: 1,400 rpm Hsdpfxex Hyq As Ag Dsfr Flywheel speed: 1,400 rpm Electrical data Input voltage: 380 – 400 V, 50 – 60 Hz Total power: 5 kW at 380 V Machine weight: 3,500 kg

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Magnifying lamp Worktable Ergonomic safety work chair Hjdpfx Agsx Eiuxs Dsfr

Condition: good (used), Year of construction: 1994, operating hours: 590,000 h, functionality: fully functional, total height: 4,600 mm, table height: 1,125 mm, installation height: 600 mm, total width: 3,500 mm, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, oil tank capacity: 3,400 l, Further pictures and technical data can be obtained by e-mail. Sale is ex location without guarantee and return. Dismantling and collection must be carried out by the buyer. We hand over the press free of media. Hfedpfxjvb D Trj Ag Djr

Condition: new, Year of construction: 2025, OMCN P30/SA hydraulic press with 2-speed hand pump, 30 ton. OMCN P30/SA hydraulic press with manual operation by two-speed hand pump and sturdy basement structure that provides maximum stability and minimum floor space. Hfsdeklyvtopfx Ag Djr Thanks to the perforated frame, the support base can be adjusted in height to 9 different positions so the press can be adapted to work with parts of different sizes. The winch allows the pallet to be lifted conveniently and quickly. +rapidity in approach +precision Indispensable on the shop floor and in the industrial sector, perfect for pressing metal objects, such as during assembly of mechanical assemblies, keying of bearings or pulleys onto shafts. Made in Italy and CE certified press made of sturdy materials that ensure reliability over time and is capable of generating a force of 30000 kg. Overall dimensions 2180 x 1300 x 600 mm Weight 280 Kg Pressure 30 tons Distance between shoulders 695 mm Piston stroke 190 mm Piston diameter 60 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 25.12.15, Fresan FP 60P - C Frame Eccentric Press - 60 Tons (600kN) TECHNICAL DATA: * Power: 60 tons (600kN) * Strokes Per minute: 65 * Ram-Table Distance: 365 mm * Stroke Adjustment: 0 - 100 mm * Ram Adjustment: 70 mm * Table Dimensions: 500 x 700 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces (6-slide version available, optional) * Mechanical fuse for overload protection * Pneumatic counterbalance cylinders * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) Hfedpfxsnwpc Ie Ag Dsr * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: ready for operation (used), power: 134.102 kW (182.33 HP), empty load weight: 21,000 kg, total length: 5,000 mm, total width: 2,120 mm, total height: 2,140 mm, load capacity: 400,000 kg, operating speed: 15 mm/s, reverse speed: 49 mm/s, Richtpers voor balken en andere Elektrische aanpassing voor slag (voor repeterend werk) Handmatige aanpassing voor het openen van de buigmatrijs Aangedreven rollen om het werkstuk in te voeren Max ram adjustment: 620 mm Max distance between table -- ram: 600 mm (1020 mm without tools) Hedpov Rwfgofx Ag Djfr

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Fully functional Hjdpfswxyn Ejx Ag Dsfr In good used condition

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Pressing force: 63t Press dimensions (L x W x H): 1800 x 1300 x 2500 mm Press weight: approx. 4,500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram dimensions (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Max. distance from ram to table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Operation modes: single (foot pedal, two-hand lever), continuous (automatic mode – programmable time interval 1–99,999 s and number of cycles 1–32,000) Special function for setting the lower position of the ram Automatic central lubrication Pneumatic clutch and brake. Hfodpfx Agew R Tl Te Dsr Note: Two identical presses are available (the only difference is in display size: 7" and 4.3"). If both presses are purchased, the total price is 12,000 EUR. Technical documentation is not available. Remote PLC programming assistance by a programmer is possible. Shipping costs are extra. Urgent sale, as more space is needed for new equipment.

Condition: used, Year of construction: 2009, functionality: fully functional, The basic Müller machine was put into operation in 1972. In 2009 it was completely overhauled by the Dunkes company. You will receive further information by e-mail. Dismantling and collection must be carried out by the buyer. Sale without guarantee or warranty and return as it is a used machine. The press is in daily use and can be inspected. Hfsdpfx Ajvb Hhlog Djr

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg Hodpfex D Rp Ujx Ag Djfr This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Stamping

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. Hfsdonxh T Ropfx Ag Dor * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Hfodpfx Agex D Diuj Djr Application Types Bending

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 80P - C Frame Eccentric Press - 80 Tons (800kN) TECHNICAL DATA: * Power: 80 tons (800kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 400 mm * Stroke Adjustment: 0 - 112 mm * Ram Adjustment: 80 mm (motorized) * Table Dimensions: 600 x 900 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel Hfjdpfx Aenxh Hrsg Der * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Hjdex D E N Aspfx Ag Dsfr Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. Hfedpfx Asnwmh Ssg Der * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 15P - C Frame Eccentric Press - 15 Tons (150kN) TECHNICAL DATA: * Power: 15 tons (150kN) * Strokes Per minute: 200 * Ram-Table Distance: 215 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 40 mm * Table Dimensions: 320 x 490 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame Hfsdpfsnvfv Nex Ag Djr * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 10P - C Frame Eccentric Press - 10 Tons (100kN) TECHNICAL DATA: * Power: 10 tons (100kN) * Strokes Per minute: 200 * Ram-Table Distance: 190 mm * Stroke Adjustment: 0 - 40 mm * Ram Adjustment: 35mm * Table Dimensions: 265 x 370 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter Hedpfx Agjnvfmyj Dofr * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine