Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, Dsdpfozi Hihjx Aaysuw 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: excellent (used), Year of construction: 2012, LICON Type: LiFLEX 1477 1U Year of manufacture: 2012 Control system: Siemens SINUMERIK 840D Solution Line with integrated PLC control S7-300. Technical data of the machine Max. travel in X: 1400 mm Dujdpozi E A Hjfx Aayow Max. travel in Y: 700 mm Max. travel in Z: 700 mm A-axis swivel range: 45° to –225° B-axis: 360° Acceleration: max. 5 m/s² Travel speed: max. 60 m/min Technical availability: 96% Motor spindle speed: max. 16,000 rpm Motor spindle: HSK 63 Integrated spindle Spindle motor: 25 kW at 100% duty cycle Tool holder: HSK 63 Licon - Tool magazine DTC 30 2 disc magazines - total 60 positions. Positioning via servo motor Tool length from spindle center: max. 400 mm Tool diameter with full occupancy: max. 90 mm Tool diameter with free spaces on the right and left: max. 200 mm Tool weight: max. 15 kg Tilting moment (HSK plane): max. 15 Nm Tool change time: approx. 5.0 sec up to 15 kg Pallet changer with zero-point clamping system. Control system: - SINUMERIK 840D Solution Line with integrated PLC control S7-300. - PCU 50.3-C: Intel Celeron M Mobile processor 1.5 GHz / 512 Mbyte / 1 Mbyte L2 cache / 400 MHz - Connection of decentralized modules such as inputs/outputs, motor starters, interfaces is carried out via Profibus. - Operator panel front OP012 with 12.1" TFT color display, 800 x 600 pixels (SVGA), - Machine control panel MCP 483C - Siemens motors of type 1FK7 are used for the feed axes. - Spindles are designed as main spindle motors 1PH7, 1PM6 or asynchronous motors, depending on the application. Coolant supply: Technical data: Tank capacity: approx. 1500 l, Filter capacity: approx. 300 l/min for emulsion, 1x rinsing pump (centrifugal pump) 3 bar approx. 150 l/min, 1x HD screw spindle pump 30 bar, approx. 80 l/min. and minimum quantity lubrication (MQL). Voltage supply: 400V, 3 phases, 50/60Hz, TN-S with a reliable neutral conductor. Total connected load: approx. 106 kW. Dimensions, see layout plan. Transport dimensions, machine only, without auxiliary units: Approx. length 830 cm, width 360 cm, height 330 cm, weight 28000 kg.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 4,000 rpm, TABLE DIMENSIONS: 2000 x 750 mm Dsdpfx Aozi Eyreayjuw ROTARY TABLE DIMENSIONS: Diameter 800 mm TOOL CHANGER: 30 positions AUTOMATIC HEAD CNC: HEIDENHAIN TNC 530

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Technical data – Schaublin 53 N Model: N Djdpfx Asyhm D Doayeuw Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·t/min Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), A Maho universal milling machine overhauled in 2020 is available. Travel X/Y/Z: 600mm/400mm/400mm, table dimensions X/Y: 900mm/460mm, max. table load: 250kg, tool holder: SK40, tool positions: 16, spindle speed: 4500rpm, feed rate: 4m/min, rapid traverse: 5m/min. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 2800kg, control: Maho CNC 234. The machine has a suspected defect on the control board. Documentation available. An on-site inspection is possible. Dedpfxezi Eh Ns Aayjuw

Condition: good (used), Year of construction: 1982, Bed milling machine Machine type: Reiden BF 4 Control: Siemens 840 D powerline Year: 1982 Revision: 2004 SPECIFICATIONS X-Axis: 2.000 mm Y-Axis: 800 mm Z-Axis: 1.000 mm Feed: (X/Y/Z): 6 m/min. milling head Angular range: +/- 90° Spindle speeds: 20 - 2.000 rpm Spindle power: 21 kW Tool: ISO 50 Table size: 2.200 x 700 mm Machine weight: 10.000 kg Dodpjzi Dzujfx Aayjuw

Year of construction: 2001, condition: ready for operation (used), Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible. Djdey E S D Sjpfx Aaysuw

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Dusdszi Awhjpfx Aayow Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 BF 150 LCD with smartTNC, Mousepad, and DXF-Converter, overall weight: 45,000 kg, spindle motor power: 28,000 W, spindle speed (max.): 4,000 rpm, table length: 9,950 mm, table width: 1,150 mm, number of axes: 5, This 5-axis KIHEUNG RIGITRAX X 8000 was manufactured in 2011. It features an impressive X-axis travel of 8000 mm, Y-axis travel of 1350 mm, and Z-axis travel of 2000 mm. The machine is equipped with a powerful 28 kW spindle motor and a 40-fold tool changer for efficient operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG RIGITRAX X 8000 bed type milling machine we have for sale. Contact us for further details. Djdpszhmn Uofx Aayouw - Main Computer: MC 422 C with Software option 1 & 2- Table Length: 9950 mm- Table Width: 1150 mm- T-Slots Surface: 9 x 22 / 10 x 22 nr. x mm- T-Slots Distance: 125 mm- T-Slots Front Surface: 2 x 22 mm- Max. Table Load: 3500 kg/qm- Feed Rate (all 3 axes): 10000 mm/min- Rapid Traverse (X, Y, Z axes): 16000 mm/min- Feed Power X-Axis: 70 Nm- Feed Power Y-Axis: 27 Nm- Feed Power Z-Axis: 50 Nm- Spindle Taper: ISO 50, DIN 69871- Spindle Speed Range (2 Steps):- 1st Step: 0 - 1000 U/min- 2nd Step: 1001 - 4000 U/min- Main Spindle Motor Power (100% / 60%): 28 / 38 kW (SIEMENS Main Spindle Motor)- Axis Drives: AC-Drives SIEMENS- Coolant Tank Volume: 500 l (without through-spindle cooling) / 1500 l (with through-spindle cooling - 2 pumps)- Linear Measuring System: HEIDENHAIN scales with DA 300 compressed air system- Spindle Gearbox: ZF reduction gear, 2-speed (1-1000 / 1001-4000 rpm), cooled- Milling Head: Universal Automatic Milling Head A 4 Plus, "HURON" system, cooled, bi-rotational 2.5° x 2.5°, programmable and automatic positioning in 2.5° of the 45° and 90° planes (5-axis simultaneous / indexing preparation)- Tool Changer: 40-fold vertical/horizontal chain-type system, driven via servomotor, HEIDENHAIN encoder monitoring- Through-Spindle Coolant (CTS / IKZ): 16 bar high-performance cooling system with paper filter (DEUBLIN rotary union, 16 bar for spindle, 8 bar for 6 coolant nozzles at spindle nose)- Coolant Tanks: 2 tanks (1200 l clean tank and 500 l pre-tank) with paper band filter system (500 mm paper width, 10 micron filtration fineness)- Chip Conveyor: Wide hinged belt conveyor X 8000 rear-side, elevated discharge- Measuring Preparations: Prepared for TS 220 workpiece touch probe and TT 140 tool touch probe- Additional Features: Hydraulic counter-weight balance in Z-axis, spindle orientation for rigid tapping, PLC prepared for 4th axis, automatic taper blow-out unit (A2 + A4 head), automatic central lubrication, electronic portable handwheel HEIDENHAIN HR-410, Ethernet interface, automatic Power-Off- Machine Enclosure: Partial machine enclosure with 2 front doors for X 4000 or 4 front doors for X 6000 - X 8000- Paint Finish: Light grey RAL 7035, Carmine red RAL 3002

Condition: ready for operation (used), Year of construction: 1990, Available immediately from our location: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel distances X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Dujdpfx Aezizgneaysw Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: EUR 1,800.00 (plus VAT, ex location)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm Dujdpfjw U Tlzox Aayjw RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm Dusdpfxjzix Rwe Aayow - Splash guard enclosure - CE marking

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm Duodpogal Avefx Aayjw -Quantity: 1 piece available -Weight: 51kg

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg Djdpfjgxqt Aox Aayjuw

Condition: good (used), Cross support, cross support, cross table, cross-sliding table Duedpfog Dg Rpjx Aaysw -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Condition: used, Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 190 mm -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm Dodspul U Aopfx Aayeuw -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

Condition: used, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: AMF, universal clamping pad set in wooden box -Design/Dimensions: see photos -Quantity: 3x set available -Price: per set -Dimensions box: 280/160/H40 mm Dsdpfju Npgqjx Aayeuw -Total weight: 7.0 kg/piece

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Bush, Timing belt pulley type 1615 40-8M-30-T -Type: P60-5M -Taper clamping bushing: optibelt 1615-25 Duodpfeinwufox Aayow -Hole: Ø 25 mm -Quantity: 19x toothed discs available -Price: per piece -Dimensions: Ø 106 x 38 mm -Weight: 1.8 kg/pc.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Dusdpfx Aaohtn Sfoyow -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm -Weight: 1548 kg

Condition: good (used), Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo Dusdpfx Ast H Tqteaysw -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Condition: used, Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck Dsdpfxjt Trw Se Aaysuw -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Condition: good (used), Copy head, copying head, copying device, copying lathe -Heavy copy head for: lathe -without: hydraulic unit -Guide rails: 2 -and: accessories -Dimensions: 1100/170/H370 mm Duodpfxodzymae Aayow -Weight: 143 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Table area: approx. 1550 x 420 mm -Grooves: 5 piece 16 mm Duodpfx Aasfnbyhoyjw -Dimensions: see photo -Total dimensions: 1630/420/H180 mm -Weight 461 kg

Condition: used, Flat Pulley, Timing Pulley, Multi-Belt Pulley, Timing Pulley -Toothed pulley: Ø 256 mm -Type: D TB 56-14M-85 Dusdjmxpuzspfx Aayew -Intake: Taperbush Tecnamic 3525-48 / Ø 48 x 65 mm -56 teeth: belt width 85 mm -Dimensions: Ø 256 x 103 mm -Weight: 25 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg Dsdpfeb A Iyuox Aayjuw -Quantity: 1 available Price: per piece