Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Isdpfxjyvg Ruj Ahvjhw Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex location: Milling machine Reckermann Type Delta 1300 Year of manufacture 1990 Table 1400 x 400 mm Travel X/Y/Z 1000/400/450 mm SK 50 Spindle speeds 60 – 3600 rpm Drive 12.5 kW Dividing head Many tools Heidenhain 3-axis digital readout Ihjdpfx Ajyvg Rnjhvow Weight 4 tons At a price of EUR 3,750.—plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Ihodpfxjyvg Rbe Ahvjw Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1984, Copy milling machine Deckel Type: KF 3 S Year of manufacture: 1984 Table dimensions: 600 x 555 / 620 x 750 mm Y travel: 150 mm Z stroke: 380 mm X stroke: 150 mm Drive: 3 kW Roughing spindle Ihedpfoyvg N Dsx Ahvjw Finishing spindle Clamping arm Control handle with cable Probe holder Collets Weight: 2,400 kg Price: EUR 2,250 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1986, Immediately available from location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables Tool holders, milling cutters Iedpfeyvg Nwex Ahvohw Coolant system Digital readout Weight: 4 t Price: EUR 3,750.— plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Ihedpfxoyvg Nqj Ahvjw

Condition: good (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (min.): 4,000 rpm, year of last overhaul: 2017, Equipment: documentation/manual, SHW Powerspeed 5 Year of manufacture: 2003/2017 overhauled Travel X = 3000 Y = 2100 Z = 1300 (1160) Spindle speed [rpm]: 4000 Control: iTNC 530 Tool holder: SK 50 Tool changer: 48 positions NCR table: 1600x1200 mm Acceleration X, Y, Z axes: 3.5 m/s² Swivel range milling head: 360x1 Ihodpfx Aeyvgutshvow Swivel range milling head mounting: 1810x1 Internal coolant, chip conveyor, belt filter system Plate field: 4000x1000 mm

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* Iedpfov Ucbnsx Ahvshw - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min Ihjdpfx Ahovvnfusvjw spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: good (used), Boring tool Iodoyvfnwspfx Ahvohw Scope as shown in the pictures ISO / SK 40 with drawbar thread for DECKEL machines

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 Ihodpeytyqzofx Ahvjw 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Longitudinal travel X-axe: 6500 mm Ihjdpfxoytyqus Ahvew Crosstravel Y -axe: 900 mm Travel Z-axe (Height): 1600 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 20 > 3000 rpm

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 Iedpfx Ajytrxkjhvshw - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, Technical details: x-travel: 8500 mm y-travel: 2000 mm z-travel: 1500 mm rapid travel x/y/z: 25 m/min table-size: 10.000 x 1.350 mm table load: max. 5 t/qm universal head: orthogonal 1° x 1° tool taper: SK 50 milling head speed: 4.000 1/min power capacity: 37 kW max. torque on the spindle: 900 Nm Ihodpfxjytrw Te Ahvow internal coolant system feed: 15 bar control: HEIDENHAIN iTNC 530 Tool changer: 60 Pos. total power requirement: 75 KW dimensions of the machine ca.: 12,7 x 5,2 x 4,6 m weight of the machine ca.: 35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Condition: used, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 24 rpm, spindle speed (min.): 1,685 rpm, table width: 700 mm, table length: 4,000 mm, overall weight: 1,300 kg, ZAYER model 3500 BF fixed-bed milling machine Used Iedpfx Aeytp S Iohvjhw X-axis travel: 3,500 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Table dimensions: 4,000x700 mm Birotary HURON-type head Spindle taper ISO 50 Spindle speed: 28-1800 rpm Axis digital readout included

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. Isdpfoytnd Asx Ahvohw The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: defective spare-parts repository (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: 18369, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill travel distance: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,000 mm, total width: 2,200 mm, total length: 2,200 mm, table width: 500 mm, table length: 500 mm, rotational speed (max.): 6,300 rpm, rotational speed (min.): 25 rpm, table load: 2,500 kg, overall weight: 2,200 kg, control cabinet height: 1,500 mm, control cabinet length: 900 mm, control cabinet width: 800 mm, workpiece weight (max.): 450 kg, input current: 22 A, For sale is a Deckel FP3NC tool milling machine featuring a Dialog 4 control unit. The machine is in visually decent used condition and includes a Fibro NC rotary table, model NC-T 400. Please note: The machine is currently non-functional and is therefore expressly sold as a project for enthusiasts, a source of spare parts, or for refurbishment. Ihedpjyu Tn Asfx Ahvjw Known specifications: - Manufacturer: Deckel - Model: FP3NC - Control system: Dialog 4 - Machine serial no.: 2803-3369 - Year of manufacture (control unit per nameplate): 1987 - Operating voltage: 380 V, 3 phases, 50/60 Hz - Rated current: 22 A - Control voltage: 24 V - Rotary table: Fibro NC-T 400 - Year of manufacture (rotary table): 1986 Faults / Condition: The machine shows error code 30. According to our current understanding, the likely cause is a depleted battery on the circuit board. However, this information is provided without guarantee, as no further technical inspection or repairs have been carried out. The machine is therefore being sold strictly as defective. Ideal for: - Repair professionals - Electronics/CNC specialists - Parts harvesting - Export Scope of delivery: - Deckel FP3NC milling machine - Dialog 4 control unit - Fibro NC rotary table NC-T 400 - Available documentation / operator manual / electrical schematics, as shown in the pictures Note: This sale is made without warranty, guarantee, or returns. Inspection by appointment is possible and expressly encouraged. Loading can be carried out by us.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Universal Milling Machine HERMLE UWF 802 M with HS 401 Contouring Control - Very well-maintained original condition from university - Year of manufacture: 1998 - HS 401 contouring control - Travel paths X / Y / Z: 500x430x400mm Iodpfx Aoyu S A Eshvshw - Spindle speed range: 18 - 3550 rpm - Stepless feed in all three axes: 0-1600mm/min - Rapid traverse: 0-1.6m/min in all three axes - Vertical and horizontal milling attachment - Tool holder: ISO 40 - Hydraulic tool clamping - Universal rotary / tilting / swiveling table Incl. rotary table plate - Universal angle table - Drive power: 6 kW - Centralized lubrication - Chip trays - Machine feet - Work lamp - Electric spindle guard - Documentation Dimensions (LxWxH): 1.9x1.8x1.9 meters / Weight: 1800KG Subject to errors and input mistakes.

Condition: used, 50 pieces Ihsdpfsyu Rugsx Ahvow used SK 40 holders

Condition: used, Year of construction: 1983, Technical details: Ihjdpfx Ahjwgdz Eevjw x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: used, Year of construction: 2010, functionality: fully functional, Initial commissioning: March 2010 Control: Fidia with HPX21 handwheel X-axis: approx. 11,500 mm Y-axis: approx. 1,550 mm Z-axis: approx. 2,550 mm Ijdpfxsytf H Ij Ahvehw B-axis: ± 210° C-axis: ± 104° Spindle speed: max. 16,000 rpm Tool holder: HSK 50A Linear axis drives Feed rate for X, Y, and Z axes: 16 m/min

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Deckel FP1 milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: Year of manufacture: 1989 Machine no.: 2102-5533 * Speed: 40 - 2000 rpm * Infinitely variable feed on 3 axes * Rapid traverse on 3 axes * Spindle brake * Table movement X/Y/Z: 300/160/340 mm * Vertical milling head can be adjusted 100 mm on the spindle block * Vertical quill Ijdeytcarjpfx Ahvohw * Drawbar system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis digital readout Heidenhain TNC113 Coolant system Central lubrication Operating manual, spare parts diagram

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of manufacture: 1984. Ihedpfeytb Uhox Ahvjw Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Speed range: 50 - 2500 rpm - Power: 3.7 / 4.4 kW - Spindle brake - Auto feed: X-Y-Z infinitely variable 6.3 / 630mm/min - Rapid traverse X-Y-Z 1300mm/min - Fixed angle table - Vertical quill 90mm stroke - Tool holder ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on milling head - Machine books with spare parts list and electrical diagrams

Condition: excellent (used), Year of construction: 2005, operating hours: 8,800 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 4,000 rpm, Correa Prisma with Heidenhain 530 With many SK 50 holders Ijdpfxjyuy Tfs Ahvjhw

Condition: used, Year of construction: 1985, machine/vehicle number: 11429, For sale: MAHO MH 1000c milling machine Serial no.: 11429; Iodpfxjyuwr So Ahvohw BKW GmbH model S..05ES Year: 1985; 18 bar; Volume: 1.6 m3/h; 3000 rpm; Power: 0.36 kW; 50-60 Hz; Voltage: 190-240 V; Current: 2.85 A; Net price: 9000 Euro