Milling machine

MAHO MH 800 P

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P Dedpsv Amryofx Akvjkr with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Dkodpfx Aehgiuhjkvsr Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight Dsdpfx Akextbf Eevjkr 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm Dkjdjxacirjpfx Akvjr turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m Dksdpowm Rm Isfx Akvsr - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Djdpfx Akjrpnf Aovskr Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 Dkjdpsqgcdtefx Akvor X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Weiler E30 Precision Lathe Manufacturer: Weiler Type: E30 Year of Manufacture: 2018 Condition: Used, operational, ready for demonstration Dkedpfoy Uzgbsx Akvjr Operating Hours: 8,500 hours Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - 3-jaw chuck - 8-position tool turret

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Dsdswt Sy Aepfx Akvskr Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min Dksdpfeu Idbysx Akvor control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *