Condition: used, Year of construction: 1958, Technical details: drill diameter: min/max: 10 / 80 mm lip angle: min./max.: 70° / 100° ° clearance angle: 7° ° grinding wheel speeds: 2100 U/min grinding wheel diameter: außen: 250 mm grinding wheel hole diameter: 150 total power requirement: 2,2 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: L:1,3 x B:1,0 x H:1,4 m Spiral drill center grinding machine with “sludge box”. Grinding wheel stroke 60 mm Tool holder with special chuck, swiveled by hand 45° Point angle adjustable by loosening the clamping lever. Celinou U Icljixpogt *

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Celov Sfmueinixpogt

Condition: used, Horizontal Machining Center Kitamura HX500G Main Technical specifications: Spindle Max. Speed: 12000 RPM Max. diameter of tools: 125mm Cgolism E Ttbjnixpst Max. weight of tools: 20 kg Table work area: 630x630mm Max. work size: 1000x1000mm Table load capacity: 1200kg X-axis: 1050 mm Y-axis: 850 mm Z axis: 900 mm Spindle nose to table distance: 130 - 1030 mm Available. Fast delivery

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction - Quick rear roll adjustment - Crowned rollers to compensate for deflection Celinewhf T Ssixpegt - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Location: arriving at warehouse 54634 Bitburg - Available at short notice

Condition: used, Year of construction: 2007, x-travel 1020 mm Colowhf Ngsinixpsgt y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2014, Condition: ready for operation (used), General Data Measurements width 11484 mm Measurements depth 36500 mm Measurements height 9100 mm Machine weight 172000 kg Control Unit Brand FANUC Model 31i B Main Drive Spindle speed range 2500 RPM Spindle motor power 37 kW Tool taper BT-50 Media Chip conveyor Yes Additional Equipment Auto Tool Changer (ATC): 90 Tools / Auto Angle-Head Changer (AAC): 2 Units (2) AAC Units: (1) Extension Head (L = 600 mm)/ (1) 90° Right Angle Head (L = 350 mm, Index = 5°) Hydraulic Pump & Coolant System / Coolant Through Spindle (30 BAR) External Coolant Unit 4-Axis Linear Scales Csliniowctz Hsxpegt This 5-axis HNK HPM 30M gantry milling machine was manufactured in 2014. Ideal for complex and precise milling tasks, it offers enhanced flexibility and accuracy. Consider the opportunity to buy this HNK HPM 30M gantry milling machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 2002, Condition: used, Technical details: control: Soft - PLC Cgolineu Nwf Ijixpot burner heads: 1 Stück Distance between centres: ca. 4000 mm Rotary-table: Ø 890 mm Rotary-table: drehbar 360° mm Rotary-table: schwenkbar: 130° mm electrics - voltage/frequency: 3x400 V / 50 Hz V/Hz total power requirement: ca. 22 kVA weight of the machine ca.: 5,0 t dimensions L x W x H: 5,7 x 2,4 x 2,8 m dimensions electric cabinet: 1600 x 640 x 1500 mm PTA-welding, Plasma coating system Plasmabeschichtungsanlage mit 8-Achsen Performance: Coating of sealing plates, seat rings, cones, tapered spindles and other wear parts. Powder dosing system: -control process control system / adjustment of the powder quantity -Powder quantity approx. 10kg, powder grain size 25µ - 500µ -Quantity regulation of the powder dosage Current source: -control MOSFET; rangePilot max. 200A and Tranfer 300A -digital display -air cooled -control 0-10V / 0-20mA Plasma torch: -water cooled -continuous power P max. pilot 100A and transfer 300A High frequency ignition unit: -HF generator for arc ignition Gas control system: -process controlled for fully automatic flow. -plasma gas system flow unit electrically controllable -gas = Argon 99.99 pure gas -flow rate plasma gas system 0,05 - 5 l/min.; powder gas system 0,50 - 20 l/min.; protective gas system 1,50 - 30 l/min. Support stand with moving tip Water cooling unit Control panel Housing *

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen simultaan (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig. (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ram-slag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC-draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag van de draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Cgslev Sfn Eeinixpot Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, Machine manufactured basically in 1990 and retrofitted by REM in 2021 CNC - Heidenhain TNC 320 Z axial slide travel mm 950 Cgolijn D N H Tjnixpjt Y head vertical travel mm 2.000 X transversal travel mm 6.000 2-spindle head Spindle taper ISO50 with device for automatic locking and unlocking Head rotation 360°, 1000/4000rpm Head dimensions mm 290x290 Motor power of the spindles c.c. kw. 15 Approx. net weight machine ton. 32 Table surface mm 7.000x1.000 Vincles 3 pcs 1500X500X750

Condition: used, Year of construction: 1978, liter capacity 1000 l weight of the machine ca. 0,3 t dimensions of the machine ca. 2,8*1,5*1 m No. 4406: 1 branded coolant tank with paper band filter Made by BEDA, type 1040 year of construction 1978 approx. 1000 l volume Cgelietqp H Djnixpet Dimensions approx. 2750 x 1450 x 1000 mm, weight approx. 300 kg

Condition: used, Year of construction: 2005, control Fanuc 210i greates pass round over bed 400 mm swing diameter over face slide 270 mm turning length 650 mm cross movement. (x-axis) 220 mm longitudinal traverse (z-axis) 700 mm spindle head A6 spindle diameter in front bearing 90 mm spindle bore 65 mm 72 (MK5) chuck 200 mm Cgolswhf Naoinixpot drive capacity - main spindle 100/40% ED 12/15 kW turning speeds 4.000 U/min cross movement. (x-axis) 220 mm Longitudinal path (z) 700 mm Ball screw 32x5 mm rapid traverse (x/z) 5 m/min feed power x/z 3/6 kN Number of tools 8 St. shaft cross cut 20x20 mm Shank diameter for boring bars 25 mm quill power 680 daN centers 4 MK diameter of quill 65 mm quill stroke 40 mm connected load 22 kVA dimensions 2.100 x 1.750 x 1.710 mm weight ca. 2800 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm Cgslinieuap Uasxpst turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Year of construction: 2000, Condition: used, Technical details: pass through height: 730 mm width: 750 mm depth: 875 mm degree: max. 450 °C voltage: 400 V work height max.: ca. 850 mm total power requirement: 18 kW Total weight, approx.: 436 kg dimension machine xH: 1,55 x 1,2 x 1,8 mm 4 shelves with supports can be placed in the heating chamber. Celinixevrzwijpsgt This electric stove currently has 1x shelf in the interior. The door (size 930 x 880 x 60 mm) is lined with fireclay. Operation from the side via electronic control panel. A motor-driven fan is installed at the rear for cooling. The stove stands on a welded base frame made of sectional steel. *

Condition: ready for operation (used), Drukbuigmachine voor het buigen van buizen met en zonder doorn Buigen onder druk maakt het mogelijk om zeer kleine buigradiussen te produceren (minimale radius 1 x D). Hierdoor kunnen bijvoorbeeld ketelinstallaties met een hoger vermogen in kleinere afmetingen worden geproduceerd. Drukbuigen maakt ook het gebruik van zeer lange buizen mogelijk, omdat er geen doorn nodig is. De buislengtes kunnen achter de machine aan elkaar worden gelast en tot afgewerkte systemen worden gebogen, waardoor er geen paswerk nodig is. Bovendien garandeert drukbuigen de naleving van de voorgeschreven wanddiktetoleranties in de buisbochten volgens VGB. Vergeleken met conventioneel buigen met een doorn is de afname van de wanddikte aan de buitenzijde van de buis bij drukbuigen zonder doorn zeer gering. Bij gebruik van een buigdoorn maakt drukbuigen het mogelijk om bochten te maken uit dunwandige holle legeringsbuizen met zeer kleine buigradiussen (1 x D), omdat door drukbuigen de buitenwand van de bocht wordt ontlast Er zijn veel hulpmiddelen inbegrepen Drukbuigen of drukbuigen doornvrij koudbuigen Max dia tube x thickness: Ø 89 x 5 mm Max bendingradius: 180° Back stop max tubelength: 6000 mm Cgoljv Sfivsinixpet Bending die: yes

Condition: used, Year of construction: 2004, First MCV 2000 - Vertical Machining Center with Fanuc 0i control. Specifications: Table dimensions: 2200 x 1000 mm X axis travel: 2050 mm Y axis travel: 1150 mm Celinjm E Ttxjixpegt Z axis travel: 760 mm Spindle speeds: 12.000 rpm Work feed: 8.000 mm/min Rapid speed Z-axis: 15 m/min Rapid speed X - Y axis: 20 m/min Machine in stock, fast delivery

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Celiswhf Ntjnixpegt Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Year of construction: 1997, cutting diameter 320 mm saw band length 4200 mm cutting width 500x300 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t Cgolinixswhf I Nopot required space 3,0 x 2,4 m

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Colinixswhf Hfjpsgt Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 2012, x-travel 735 mm y-travel 650 mm z-travel 560 mm Control HEIDENHAIN TNC 530 3D table-size 800 x 650 mm rotary table 650 mm table weight 600 Kg table rotation (C-Achse) 0,001º (±360º) ° b-axis (B-Achse) -120 +120º ° workpiece dia. 840 mm workpiece height max. 500 mm rapid taverse 40.000 mm/min feed 40.000 mm/min taper HSK-A63 engine output 24 kW turning speeds 24.000 U/min Tools place 60 fach Internal cooling system 40 bar Machine on 28.008 Program on 13.900 h total power requirement 39 kW weight of the machine ca. 9.100 kg -Round table -Direct measurement system -Tool charger included -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain -Blum laser probe meter included -Chip extractor included -Cleaning gun with 2 bar 40 l/min pump -3D quick set Colinevzhb Hoixpegt -HEIDENHAIN HR-410 Portable Steering Wheel

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruisende Y-beweging van de kolom: 650 mm Verticale Z-beweging van de freeskop: 3000 mm Horizontale W-beweging van de freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopsteun / support de renforcement de la broche Boorspindelsteun / ondersteuningsportfolio#39;s Cgeliev Sfm Usnixpot Cross traverse Y-axis (table/column): 650 mm (column) Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: used, Year of construction: 1991, Control Multitron CNC-PS90 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Cgelinixswhf I Ajpet if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), total height: 2,950 mm, total length: 11,400 mm, net weight: 4,900 kg, total depth: 3,350 mm, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Cgolisv Tamrjnixpjt Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm

Condition: used, Year of construction: 1997, turning diameter 200 mm turning length 400 mm control INDEX C200-4 spindle passage 65 mm turning speeds 6.300 U/min Axis 2 weight approx. 4.300 kg In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. The machine is delivered without a bar loader. Technical features: - Chip conveyor Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale Cgeliniev Da Ukjxpst

Condition: used, Year of construction: 1996, capacity 90 degrees: round 260 mm capacity 90 degrees: flat 260 x 260 mm height of material-table ca. 750 mm multiple feeding length 6.750 mm dimensions of saw-band 3.800 x 25 x 0,9 mm cutting speed 18 - 110 m/min In our opinion, the machine is in good used condition and can be inspected Cgslinisvy Ipujxpot under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, capacity 90 degrees: round 260 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 300 x 260 mm dimensions of saw-band 4200 x 34 x 1,1 mm sawing motor 4 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery Cgolinsvy Imysixpot if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!