Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 Duobovyli Eovr Hgrot collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 2x axial driven and numerous rigid tool holders # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 was connected to a robot. This interface has been back to its normal state and a loading magazine interface has been fitted.

Condition: ready for operation (used), Year of construction: 2011, turning diameter 420 mm turning length 760 mm control FANUC i Series turning diameter at chucking work 305 mm travel -x axis 293 mm travel -z axis 830 mm rapid travel - longitudinal/face 30 m/min main spindle speeds: 2800 UpM c-axis 0,001 ° turret (x-stations) 12 spindle bore diameter 115 mm milling spindle motor 5000 UpM spindle drive 22/18,5 kW rated capacity 45 kVA weight of the machine ca. 6 t dimensions of the machine ca. 3,9 x 2,0 x 2,02 m High-performance horizontal turning center PUMA 3100 M. Debvr Hgsvzhg Asrsut Running hours: approx. 3600, switch-on hours: 41000. 12-station tool turret with 50 mm bore diameter, C-axis, driven tools. Machine dealer with own stock of 1600 m².

Condition: used, turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 63 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56.0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0.022 - 0.8 mm/U feeds - cross 0.011 - 0.4 mm/U thread M 0.3 - 10.0 mm bed width 305 mm voltage 380 V total power requirement 4.0 kW weight of the machine ca. 1600 kg range L-W-H 2320 x 1400 x 1600 mm Machine from a maintenance workshop Lathe with a precision-ground and induction-hardened bed. Very suitable for use in workshops and training centers, for example. Equipment: - Robust centerline lathe - GIVI MISURE "ME 8202" digital display, front left - RÖHM three-jaw chuck, Ø 200 mm - FORKARDT three-jaw chuck, Ø 200 mm - FORKARDT four-jaw chuck, Ø 200 mm - 2 chuck keys - Folding lathe chuck guard - MULTIFIX tool holder, size B, with 3 inserts - Movable tailstock - Chip guard, rear panel - 8 machine feet - 2 emergency stop buttons, front - Adjustable bed stop - Coolant system including coolant tray Dusbvrov Rgwlj Hgrjt

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Duebvrjv Um Dtj Hgret Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: like new (used), Year of construction: 2015, Specifications: Type CU 325. Spindle bore Ø32 mm. Quill height 165 mm. Turning length 500 mm. 12 speeds from 85-2000 RPM. 2.2 Kw. 400 Volt. Weight 650 Kg. Accessories: Centering chuck, Quick change steel holder with 4 side holders. Djbvr Hgov Umqajrout Year 2015. Have a total of 6 pieces in stock. price is per piece

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, turning length: 380 mm, spindle bore: 55 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 3,500 mm, total width: 1,650 mm, quill diameter: 85 mm, quill stroke: 440 mm, overall weight: 3,300 kg, spindle nose: ASA 5", Equipment: documentation/manual, Year 2005, max. rotating diameter 400 mm, max. workable diameter from bar 45 mm, max. workable diameter from pick-up 220 mm, max. workable length 380 mm, spindle nose ASA 5”, spindle bore 55 mm, 3-jaw chuck Autoblok 210 BH, spindle rotation speed 100-5000 rpm, spindle motor power 11-15 kW, X-axis travel 160 mm, Z-axis travel 380 mm, B-axis travel 440 mm, X/Z-axis rapid traverse 20 m/min, B-axis rapid traverse 12 m/min, bidirectional turret, 12 positions, automatic tailstock, quill diameter 85 mm, CM 4 cone, dimensions 3500x1650 mm H=1900 mm, weight 3300 kg, carpet chip conveyor, n. 12 static tool holders, piece collecting hand. Duobvr Hovw Agvjgret

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm Dobvr Hgsu Ix Sgsreut -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 320650, spindle bore: 22 mm, turning diameter: 200 mm, total length: 1,300 mm, total width: 800 mm, total height: 1,640 mm, Very well-maintained Schaublin 102N-VM lathe Center distance: 450 mm Center height: 102 mm Spindle bore: 22 mm Spindle speeds: 45-3100 rpm Precision lathe Automatic longitudinal feed Multifix quick-change tool post with 3 inserts 3-jaw chuck with steel inner and outer jaws Change gears Sony digital display With drawbar and quick-action clamping... see photos. Drawer with some accessories. Debvrjv Ulvhs Hgreut

Condition: ready for operation (used), Year of construction: 2000, Technical specifications of the lathe: Fagor control system Djbsv Rc Hcjvr Hgrsut Description of the working area: Center height 475 mm Base center width 2000 mm Center width with bed extended approx. 3000 mm Opening width with bed extended 1200 mm Max. turning diameter over bed 920 mm Max. turning diameter over the facing slide 620 mm Max. swing diameter in the recess 1600 mm We are happy to answer any further questions you may have.

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, spindle speed (max.): 3,500 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, table length: 420 mm, table width: 125 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Dsbov Um A Asvr Hgrout Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: ready for operation (used), Turning diameter over bed 1,600mm, turning diameter in the offset 2,500mm, center distance 4,000mm, face plate diameter 1,250mm, tailstock, 2 steady rests, CNC control Siemens 840D, 3 pallets accessories, 1 face plate 1,900mm, drilling supports Dobvrotpgu Aj Hgrout

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 511981, number of spindles: 2, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Manufacturer: INDEX Machine type: G 200 Y/B Machine number: 511981 Duebvr Hgjv Rb U Eerst Year of manufacture: 2007 Generally overhauled: 2024/2025 Control: Siemens Sinumerik 840 D_pl, Version: 6.5 Drives: Siemens Simodrive 611 digital Specifications: Main spindle: Hollow clamping cylinder, 60 mm bore, with C-axis Counter spindle: Hollow clamping cylinder, 60 mm bore, with C-axis, coolant through and via the spindle, tailstock function with foot switch Cross slide 1: X, Z, Y, B, C axes, turret with 14 driven stations Cross slide 2: X, Z, C axes, turret with 14 driven stations Sliding hood: Manual Chip conveyor: Knoll chip conveyor incl. Maintenance switch Coolant system: 8 bar / 18 bar Bar loader: Unimag interface for bar loading magazine Gantry removal device with parts removal conveyor Further information: Renewal of guideways X1, Z1, X2, Z2/Z4 Renewal of ball screw drive X1, Y1, Z1, X2, Z2/Z4 Renewal of cable carrier turrets 1 and 2, Z4 (including all cables, hydraulic and pneumatic hoses) Sealing Y/B axis Repair of turret head 1 and 2 (bearings, seal kit, etc.) New bearings for main spindle S4 including encoder and encoder wheel New hollow clamping cylinder S4 New bearings for counter spindle S3 including encoder and encoder wheel New hollow clamping cylinder S3 Repair of all axis motors by Siemens Renewal of all axis encoders (rod encoders, Glass scales) Replacement of safety glass for sliding door Replacement of control cabinet wiring including electromechanical components Delivery can be made shortly after receipt of order from the Nienhagen factory. This offer is subject to change without notice, availability, and prior sale. Payment terms: 100% upon order Commissioning will be charged separately.

Condition: good (used), Niles-Simmons N 30 MC CNC turning-milling machining center Added value: flexible complete machining with customized turning length steps up to 3200mm with one or two separate machining modules Left and optional right turning spindle as powerful motor spindle or gear spindle with high torque, also as backlash-free rotary axis Combination of processes: Turning / drilling / milling with universal head Gear hobbing and gear shaping of gears External milling with separate crankshaft milling unit 4-axis machining with lower support Separate boring bar slide Integrated grinding machining Technical data: Design: N30 MC CNC control Control system: SINUMERIK ONE | SINUMERIK 840D sl Drive system: SINAMICS S120 Working area: Turning length mm: 1500/ 2000 / 2500 / 3200 / 4000 / 4500 / 6500 Rotation diameter mm: 780 | 880 X - path mm: -50...+725 Y - path mm: -200...+300 | -250...+250 Turning spindle Turning spindle head DIN 55026 Size: A11 A11 | A15 Turning spindle bore mm: 92 123 Bearing diameter: mm 180 200 | 220 Main spindle drive Drive power S6-40% ED / S1-100% ED kW: 80/64 80/67* 77/68 Speed range: min-1 0...3000 0...3000|2000 0...2000 Torque S4-40% ED/S1-100% ED Nm 1100/812 3135/2642 2110/1872 Error description: The rotary drilling and milling unit has a damaged spindle bearing. As a result of the defective bearings, it was no longer possible to produce a fit (unround/vibrations) that was true to gauge. (were produced in a further step on an FP!) Duobvr Hgsv Dtdrorjt Ultimately, a non-localizable defect in the tool handling (gripper system) led to us taking the machine out of production. Disassembly by buyer, or by us 3000,- € net surcharge free loading Location: Mühldorf am Inn You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), OKUMA HOWA Type ACT 4 CNC control Fanuc 10 TF Turning diameter 380 mm Rotation over bed 520 mm turning length 750 mm 12-position turret Spindle speeds 20 - 3500 rpm Chuck Tailstock Spindle bore 75 mm Chuck clamping via foot switch Dusbvrovf I Dcj Hgret CAM connection

Condition: ready for operation (used), Year of construction: 1991, Available immediately from location: Voest Alpine Steinel Cycle Lathe Type W 570 E Year of manufacture 1991 Center height 280 mm Swing over support 340 mm Swing in the gap 600 mm Turning length 1000 mm Spindle bore 62 mm Spindle speeds up to 2500 rpm Tailstock MK 5 Dobvr Hgjv Uh D Usrsut Drive 20 kW Weight 4 tons Chuck Multifix with holders Many tools Price €4,250 plus VAT ex location

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, Functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, tool mount: 32 mm, type of input current: three-phase, overall weight: 9,450 kg, The machine is in very good condition, maintains new parameters and accuracy. Dujbvr Hsvri I Ajgret Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received.

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system Duobev Ra Sievr Hgret + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.

Condition: reconditioned (used), Year of construction: 1970, Heidenreich & Harbeck Hamburg 840 Condition: Used Year of construction: 1970, geometrically overhauled in 2023 Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 520 mm Center distance: 1500 mm Center height: 420 mm Motor power: 11 kW Bed width: 600 mm Dusbjv N T Smevr Hgrot Spindle bore: 127 mm Longitudinal feeds: 0.08 - 2.8 mm/rev Cross feeds: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 rpm Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - Forkardt 3-jaw lathe chuck, D = 400 mm - 3-axis digital readout - Quadruple tool post Scope of partial overhaul: - Machine partially disassembled and repainted - Guideways ground on both sides (Z-axis, Z-axis, and X-axis) - Tailstock sleeve hard-chromed and ground (inside/outside) - New stainless steel back plate

Condition: new, With the machines of the DL E Heavy series, you can machine really large turning diameters and workpiece lengths. This lathe series is the solution for conventional machining of workpieces up to 8000 mm (315 in.) in length and over 1600 mm (63 in.) in diameter. The particularly wide and heavily ribbed machine bed takes heavy workpiece weights. Powerful motors drive the main spindle via a finely adjustable multi-disc clutch. The rapid traverse in the support is particularly effective with large bed lengths and the heavy tailstock is also moved with a motor drive. Dujbeu E Suisvr Hgret

Condition: not inspected (used), Various turning tool holders for Mazak CNC lathes type Quick Turn 20, Quick Turn 30, Slant Turn 40. Dobvr Hsq E Ixkjgrjut

Condition: ready for operation (used), Year of construction: 2005, Available immediately from location: Mexpol L&Z Lathe Type TUB 600 Year of manufacture 2005 Center height 320 mm Bed swing 640 mm Bend swing 420 mm Turning length 3000 mm Spindle bore 80 mm Spindle speeds 20 – 2000 rpm Drive power 15 kW Tailstock MT 5 Cross slide travel 315 mm Dsbvr Hev Uh Dhjgrout Top slide travel 130 mm Digital display Chuck Lynette Multifix tool holder with inserts Price: €7,500 plus VAT, ex location

Year of construction: 1977, Condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Dusbvronkad So Hgrjt

Year of construction: 1986, Condition: used, Weiler Primus lathe built approx. 1986, three-jaw chuck, Multifix. Machine in good condition, ready for demonstration under power on request. Dsbsrhzcmevr Hgreut

Year of construction: 1988, Condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Duebvrema Snxo Hgret

Year of construction: 1977, Condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Djbvr Hgsmdn Dxerjut