Used Angel Antoni for sale (138)

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals Gedpfx Agsxuqk Hebett - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 1999, Engel robot Year of manufacture: 1999 Gjdpfx Aexxdhtjgbstt With Plus control cabinet

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Gtjdjdcmizepfx Agbst Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 1988, condition: used, Engel display, year of manufacture approx. 1988 Gtsdpfxexuu Uce Agbot

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 Gtjdpfx Asdcmdlsgbet 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Closing 125 TO Godpfx Agjh R T Sljbjtt Year 2000 Scrow 45mm Spray weight 318 cm3

Year of construction: 1999, condition: excellent (used), Electronic cards Cc100 - Angel year 1999 PS244 PD242 CU 201 Gtjdpshgka Aefx Agbjt CU 211 DO 321 Di 325 AR 281 SR 161 BC 082 OUTPUT TT 081

Condition: excellent (used), Year of construction: 1999, Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm Gtsdpfxjd Sym Ee Agbet

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% Gtodpfevndvysx Agbst final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: excellent (used), Year of construction: 1995, CNC lathe AVM Angelini Type Snupy E 415 Year of manufacture 1995 CNC control Fanuc 21 i-T Swing diameter 415 mm Turning length 600 mm Speeds up to 4500 rpm Spindle power 15 kw Revolver 11-way Ejector collecting device Tools Motorized automatic tailstock Godpjvt U H Hsfx Agbott Tools Weight 4 tons

Condition: ready for operation (used), functionality: fully functional, empty load weight: 7,400 kg, maximum load weight: 29,400 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 09/1997, loading space length: 1,360 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 70 %, ground clearance: 850 mm, color: orange, Year of construction: 1997, Equipment: ABS, tail-lift, Used De Angelis low-loader semi-trailer with winch, 3 axles (3rd steering), air suspension, ABS, gooseneck chassis with twin full-width electro-hydraulic rear ramps, hydraulic winch under the neck (max. 24 tons), lowered deck section 9.95 m long x 85 cm from the ground, aluminum side boards 70 cm high, opening and removable, year 1997, inspected until 31/12/2026 – DEALER INTERDRIVE SRL – PARMA Gtjdpfxjx H S Awj Agbet

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs Gedpfxot Rhmkj Agbjtt - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 178 mm Gtodpfxjtqmv Ds Agbot Height range: 89 mm - 254 mm Production capacity: up to 150 c.p.m. Tooling for approx.: 99 mm (401) or 153 mm (603)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Gedpfx Agowd Ertsbstt Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW

Condition: good (used), Make: Angelus Type: automatic seaming machine with 4 heads Model: 40P Capacity: up to 12,000 cans per hour depending on can size, product and conditions Range: tin diameter ø 52,5 - ø 99 mm (by means of size sets) tin height up to 110 mm Frame: steel, painted in RAL9006 Dimensions: L x W x H = 2,500 x 1,400 x 2,200 mm Gsdpfx Agsf Rtffjbstt Weight: 2,500 kg. Power supply: 380 Volt - 50 Hz - 4 kW Features: straight line feed without safety enclosure Tooling: machine equipped for one can size Ø 99 mm as-is or customized to customer specification

Condition: excellent (used), Year of construction: 2003, CNC lathe Angelini Oscar, built in 2003; GE Fanuc Series 21i - T Permissible diameter on the slide: 320 mm Gtedpfxsvt U Hyj Agbjt Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Z-axis travel: 720 mm C-axis 12x -VD30 X-axis rapid traverse: m/min 24 Z-axis rapid traverse: m/min 32 Spindle nose: ASA 5" Spindle bore: 61 mm Bar capacity: 52 mm Spindle motor power: kW 15 Maximum spindle speed: 4,500 rpm Hydraulic chuck diameter: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck Dimensions: 402 x 130 x 199 h cm Weight: 4,500 kg Accessories: various holders and driven holders

Condition: good (used), functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 48,000 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 06/2017, loading space height: 850 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 74 %, color: green, Year of construction: 2017, Equipment: ABS, tail-lift, Used De Angelis extendable heavy-duty low loader semi-trailer, 4 axles with first axle liftable and third and fourth axles steering, chassis extendable by an additional 3.70 m, air suspension, EBS, RUD lashing rings on the platform rated at 7 t, single electro-hydraulic ramps, side extension outriggers, rear and front stabilizer legs, year 2017, stake pockets, steel and wood floor with closed low-bed deck of 9.40 m + 3.70 m extension, deck height 85 cm from the ground, aluminium sideboards on gooseneck, gross load capacity up to 70 t, tare weight 16 t, roadworthiness inspected until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Godpfx Asx H Swuogbstt

Year of construction: 2017, operating hours: 10,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2017344, Calender used for: transfer printing, direct inks reactivation, thermosetting – heatsetting, heatsetting of 'crush' effect. Gtjdpfjxb A Tysx Agbst

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Gtsdpfx Agetqmryobet Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. No. of heads: 6

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS20RS Glas edging machine for straight edge and arris Gtjdpfx Agewd E Rpsbet 6x straight edge spindle (3x Diamond, 2x Polishing wheel, 1x Ceriumoxide) 4x arris spindle (2x Diamond, 2x Polishing wheel) - Glasthickness 3-30 mm - min. glas size 50 x 50 mm - Max. Loading weight 1.000 KG - Height 812 mm - massive and longlasting conveyer - automatic SPS controlled thickness adjustment - tanks for waste water - 2 meters in- and outlet - Total length 7582 mm

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Gtedpfx Ast D A S Iogbot Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Veneer unwinding Bertram - 1995 To be dismantled by buyer

Year of construction: 1977, condition: used, Make: Angelus Type: automatic 4 head rotary can clincher (1st operation) Model: 40P Gedpfx Aoiauldjgbstt Serial no.: 96831077 Build: 1977 Frame: coated mild steel Dimensions: L x W x H = 2500 x 1400 x 2200mm Capacity: up to 12.000 cans per hour Power supply: 380 Volt – 50 Hz – 4,0 kW Features: disc-feed belt-pulley speed regulation machine has a lid magazine Tooling: can size 99 mm

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS-M4 Glas edging machine for straight edge and arris 2x straight edge spindle (1x Diamond, 1x Polishing wheel) 2x arris spindle (2x Polishing wheel) - Glasthickness 3-20 mm - min. glas size 60 x 60 mm - Max. Loading weight 150 KG - Height 830 mm - massive and longlasting conveyer - manual thickness adjustment - tanks for waste water Gtjdpfxjwd E D Ns Agbot - 1,2 meters in- and outlet - Total length 4455 mm

Condition: as good as new (ex-display), Year of construction: 2025, Schiatti Angelo FPS15 Glas edging machine for straight edge and arris Gtsdpfx Agjwd Eydjbot 4x straight edge spindle (2x Diamond, 2x Polishing wheel) 4x arris spindle (2x Diamond, 2x Polishing wheel) - Glasthickness 3-20 mm - min. glas size 150 x 150 mm - Max. Loading weight 1.000 KG - Height 765 mm - massive and longlasting conveyer - springs for automatic adjustment to the glas thickness - tanks for waste water - 2 meters in- and outlet - Total length 6977 mm

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Gsdjwd Hbiopfx Agbstt Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection - Inkl. turning station