Used two shaft shredder for sale (72)

Condition: excellent (used), Year of construction: 2016, power: 556 kW (755.95 HP), SCANIA diesel engine for LINDNER URRACO 95DK Gtsdpfxsx Uqnus Agbet

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm Gtodpfx Ajx Szdzsgbst

Condition: used, Year of construction: 2011, operating hours: 4,950 h, functionality: limited functionality, machine/vehicle number: 80, rotational speed (min.): 16 rpm, power: 261 kW (354.86 HP), We purchased the machine new in 2011. Since the end of 2020, we have had a new unit, and the VZ 750 D has been barely or not at all used since then. The machine is still operational and can be demonstrated. The combs are new, the belts are in good condition. The engine (CAT C9) runs and has power, emits smoke under full load as there is no exhaust gas aftertreatment installed. The Arjes can be inspected by appointment. Please submit your questions in German; we will answer them promptly. The price is negotiable. Gsdpfjx Tp T Tox Agbott

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. Gjdpjx Td Npsfx Agbstt This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Please feel free to contact us – we are happy to advise you.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Gsdpfjwk Egwsx Agbott Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 2 x 45 = 90kW 2. Machine Weight: 12.000 kg 3. Shredding Capacity : 3 - 4 tons / h ( Aluminum profiles, barrels, fridge, etc steel thickness up to 3 mm and waste ) 4. Cutting blades are made of material HARDOX 500. Blade thickness is 6 cm and coated with HRC 60 hardfilled welding. Blades are easy to replace. 5. Loading Chamber Dimensions: 800 mm x 1200 mm 6. The walls will be covered with HARDOX 500 material. Godpjgwcfzefx Agbett 7. Before painting, the whole machine body will be sandblasted. 8. Two cover undercoat and one cover paint will be applied. 9. The movement of the rotors is provided by an electric motor linked with a gearbox. 10. The rotors are moving independently of each other 11. The loading of the shredder can be done by grape or conveyors 12. In case of a jam between the rotor blades the machine turns the rotors in the opposite direction to remove the compression. 13. After the jam is solved the rotors return to their normal direction, If Jam is continuing the machine will stop with an acoustic warning. 14. A Hydraulic Oil cooling system is implemented. 15. Rotors are independent from each other and work at 18-20 rpm. 16. Hydraulic system components will be provided by PARKER or EATON-VICKERS & KAWASAKI brands. 17. All electrical parts will be SCHNEIDER and SIEMENS brands. 18. The machine is fully automatic with SIEMENS S7-1200 PLC control. 19. The machine is certified with ISO 9001 issued by URS, and CE issued by SGS. 20. Machine will be under AYMAS MAKINA San. Ve Tic. A. S. guarantees against manufacturing defects for one (1) year or two thousand five hundred (2.500) hours of operation.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 30 kW (40.79 HP), rotor length: 770 mm, DSH Series Shredders are designed to shred large volumes of durable materials using customized blades mounted on two parallel shafts. The rotors move independently, driven by a planetary gearbox powered by an electric motor. The double-shaft rotor offers an effective solution for recycling metal scraps, plastics, wood, and other tough materials. Its strong structure and synchronized dual-shaft blades provide long-lasting, reliable performance even in heavy-duty applications. Gedogwhb Ispfx Agbett Like the SSH Series, DSH Series shredders use world-class brands for complementary components, maintaining the same high-quality standards. Models are available in DSH S1, DSH M1, and DSH L1 versions, all CE-certified.

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D Gtodpex Szduofx Agbst - year of manufacture 2008 - low hours - good working condition - with wireless remote control and spare parts

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 all types availlable WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. We impress with our high level of workmanship and quality. Delivery time by arrangement Gtodpfx Agsfg Adlebot WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: ready for operation (used), operating hours: 3,700 h, functionality: fully functional, total length: 6,000 mm, total width: 2,500 mm, overall weight: 18,400 kg, year of last overhaul: 2009, The Komptech Crambo 5000 shredder is in perfect condition and has been refurbished in 2009 where it got a new mercedes engine. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. The engine's working hours are 3700 hours. Gtodex Rvrkepfx Agbot - The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. - The shredder has a remote control. If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,500 mm, total width: 840 mm, total height: 1,832 mm, overall weight: 370 kg, warranty duration: 12 months, rotational speed (min.): 18 rpm, power: 2.2 kW (2.99 HP), input voltage: 400 V, year of last overhaul: 2024, New twin shaft shredder mod. ITS180x300E, slow speed, high torque. Solid and heavy duty construction. Small and compact shredder: suitable for lightweight applications and for the volumetric reduction of less tenacious materials or when a high capacity is not required. Gtodpet D E Ufofx Agbet Cutting chamber 180x300 with n ° 2 hexagonal shafts fitted with n°18 - 10mm thick blades with 5 hooks. The machine is driven by n °1 electric motor 2,2kW, 400V, 50Hz. The shredder is supplied complete with a supporting stand rotected on three sides and by with door with safety microswitch, feeding hopper and electrical control panel. Total weight of the shredder about 370Kg.

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Electric Motors Total Power: 180 kW 2. Machine Weight: 20.000 kg 3. Shredding Capacity: 10 t/h (Steel) 15 t/h (Copper) 4. Blade Quantity: 90, Blade Thickness: 100 mm. 5. Loading Chamber Dimensions: 1.600 mm x 2.400 mm 6. Shredding Chamber Dimensions: 1.000 mm x 1.600 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. Gtodpfx Aogwcc Ajgbet 15. Each shaft will be able to move independently from each other. 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Discharge conveyor Gtodpfx Ajxf Aqtjgbot Overband magnet

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. Gsdox Nkhqspfx Agbott • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: MBUT1-9, Cable shredder Pre-shredder Chip crusher Shredder Two-shaft shredder Rotor shear Rotor knife Chip shredder 5 pieces available! Manufacturer TBE Habermehl TYPE ZH400, BJ 2003 Power 400V 3KW with pumping station, without control The shredder can also be operated separately from the chip conveyor Dimensions complete LxWxH 200x85x120cm (motor), 110x55x31cm LxWxH (shredder), Opening about 45x40cm Ideal for pre-shredding cables with plugs, plastic, metal, wood etc. Warning - not a toy. The shredder eats almost everything. Very robust engine and transmission Used condition, function flawlessly until dismantling Collection only by appointment in 75053 Gondelsheim Shipping by forwarding agency possible, please inquire with zip code Gtedpjikm Nrefx Agbet

Condition: used, Double-shaft shredder Gsdpfx Agoxgtcvebott Drive 37.50 KW

Condition: new, We would like to present you with an offer for Protechnika shafts dedicated to MRW 2.85 and MRW 2.10.10 machines: MRW 2.10.10: - 6-10-10 - 8-10-10 - 10-10-10 - Steel shafts - Side combs - Breaking bar MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 - Side combs - Breaking bars PROTECHNIKA is a company with 21 years of experience, actively engaged in the manufacture of spare parts and complete recycling lines from the very beginning of its operations. Gtsdpfxjx Hx Hpe Agbjt In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. Through the implementation of automatic welding processes and our own proprietary production technology, we have been able to minimise production times while maintaining consistent, high quality. Grinding shafts are produced in series, which, among other benefits, enables us to partner with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welding personnel - ISO 9001:2015 - ISO 14001 - Independent design department able to meet any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are our top priority, because their satisfaction is our success!

Condition: new, Year of construction: 2025, 1. Electric Motors Total Power: 360 kW 2. Machine Weight: 44.000 kg 3. Shredding Capacity: 10 - 15 tons/h (Iron & Steel) 4. Blade Quantity: 78, Blade Thickness: 150 mm. 5. Loading Chamber Dimensions: 2350 x 4085 mm 6. Shredding Chamber Dimensions: 1500 x 2000 mm 7. Replacement and maintenance of the blades can be easily done from the top of the chamber. 8. Cutting blades are made of material No: 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (Twisting and breaking resistant ) 10. All chamber walls will be covered with anti-wearing armor steel material HARDOX 500. 11. All static blades and distance rings will be made of HARDOX 450. 12. Speed: 4,5 – 6 rpm 13. The movement power of shafts will be provided by four planet reductors which are driven by four power-controlled bi-directional hydro motors. Hydraulic equipment will be PARKER brand or BOSCH-REXROTH. 14. There will be hydraulic oil and reducer oil cooling units separated from each other. 15. Each shaft will be able to move independently from each other. Gtjdpfxedfc Uzo Agbjt 16. The loading of the shredder can be done by crane 17. The machine will stop itself with an acoustic warning with the help of security sensors which are going to protect the machine against any harm. 18. There will be an automatic grease oiling system to keep bearings oiled automatically. 19. All electrical parts will be SCHNEIDER and SIEMENS brand. 20. The machine will be fully automatic with PLC control. There will be a touch screen on the control panel which will provide easy access to machine settings and process monitoring. 21. The machine will be under Aymas Makina San. Ve Tic. A. S. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) operation hours. 22. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements.

Condition: used, Opening: approx. 1600 x 1600 mm Gtodpfexgtdajx Agbjt Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Condition: new, We would like to offer you shafts designed for machines such as PRO.S1, MRW 2.65, MRW 2.75. Gtsdox Hx Eropfx Agbet - Paddle shafts - Concrete shafts - Star shafts - Trapezoidal shafts - Cassette shafts PROTECHNIKA is a company with 21 years of history that has specialized in the production of spare parts and complete recycling lines since its inception. In recent years, we have expanded our portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technology, we have minimized production times while ensuring consistent, high quality. Grinding shafts are a serial product, which, among other benefits, allows us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding processes / ISO 15613 / ISO 15614 - ISO 9606-1 qualified welders - ISO 9001:2015 - ISO 14001 - An independent design department capable of meeting any customer requirement - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of utmost importance to us, because their satisfaction is our success!

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 Gtodox Hhwdjpfx Agbot MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: new, Shredding Shafts for Hammel VB 950, Arjes VZ 950, Lindner U95, Pronar MRW 2.10.10, Olnova 95DK Available in all configurations with side combs and breaker bars: - 6-8-8 - 8-8-8 - 6-10-10 - 8-10-10 - 10-10-10 Gsdpfxsx Hhq Rj Agbett - 12-10-10 PROTECHNIKA is a company with a 21-year history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and our proprietary production technology, we have minimized production times while ensuring consistently high quality. Cutting shafts are a serial product, which allows us to collaborate with machine manufacturers as an OEM supplier. What sets PROTECHNIKA apart from the competition? It’s simple! - Certified 3.1 materials - TUV SUD Rheinland certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department able to meet all customer requirements - Our own Research and Development Center Customer relations are of paramount importance to us, as their satisfaction is our greatest success!

Condition: new, Shafts dedicated for IMPACTOR 250/850, COMPACTOR 300, EKOMAXX 800. Option to place orders including cassette and screen basket. - BETONWELLE - PADDLE - STAR (4-KNIFE, 6-KNIFE) - TRAPEZOIDAL PROTECHNIKA is a company with 21 years of experience, specializing from the outset in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the manufacture of cutting shafts for slow-speed shredders. By implementing automated welding processes and utilizing proprietary production technology, we have minimized production times while maintaining consistent, high quality. The production of cutting shafts is carried out serially, which among other benefits, enables us to collaborate with machinery manufacturers as an OEM partner. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 compliance - Automated welding process / ISO 15613 / ISO 15614 Gtjdpfx Aex Hhkqsgbst - Welders qualified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department capable of meeting all customer requirements - Proprietary RESEARCH AND DEVELOPMENT CENTRE Customer relations are of the highest importance to us, because their satisfaction is our success!

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Gedpex Hhfzsfx Agbjtt Customer relations are of paramount importance to us, because their satisfaction is our success!

Condition: new, Year of construction: 2025, SHAFTS DEDICATED FOR ARJES 950 / TYTAN MACHINES IN ALL AVAILABLE CONFIGURATIONS. NOW ALSO AVAILABLE WITH CASSETTE OPTION. - STEEL SHAFTS WITH TWO TYPES OF RINGS - BETONWELLE SHAFTS - PADDLE SHAFTS WITH TWO DESIGNS - STAR SHAFTS PROTECHNIKA is a company with 21 years of history, specializing since its inception in the production of spare parts and complete recycling lines. In recent years, we have expanded our product range to include the manufacturing of grinding shafts for slow-speed shredders. Thanks to the implementation of automated welding processes and in-house production technology, we have minimized lead times while maintaining consistently high quality. Grinding shafts are produced in series, allowing us, among other benefits, to collaborate with machinery manufacturers as OEM suppliers. What makes PROTECHNIKA stand out from the competition? The answer is straightforward! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welders - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirement - Own RESEARCH & DEVELOPMENT CENTER Godpfex Hhd Dsx Agbott Customer relations are our highest priority, as their satisfaction is our success!