CNC turning lathe

NAKAMURA-TOME TW 20

Condition: excellent (used), Year of construction: 2000, 1 CNC lathe NAKAMURA-TOME TW20 with twin spindle and twin turret Year 2000 Bodpfx Adsy Ta Sasrewp 1 STAUBLI RX130 robot, control center

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg Bwedpsvc Apbofx Adrop weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: excellent (used), Year of construction: 2000, 1 NAKAMURA-TOME TW20 CNC lathe with dual spindle and dual turret Year 2000 Bwodpfxoy Ta R As Adrop 1 STAUBLI RX130 robot, control center

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm Bwjdpfx Aot Hw H Eodrjp z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle Bsdpfjyh Hw Isx Adrowp • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 5 - Number of motorized positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] - Machine weight : 1.800 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS Hydrobar Express 332 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Bwedpjuwd Ryofx Adrsp

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min Bwodpfx Aefx Hv Hjdrjp table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: excellent (used), Year of construction: 2016, CMZ TA 20 TY-400 2016: YEAR: 2016 Bwedpfxjyzduze Adrop CNC: Fanuc 32i MAIN FEATURES: Swing over bed: 760 mm Swing over carriage: 600 mm Maximum turning diameter: 460 mm Maximum turning length: 473 mm Chuck: SMW Autoblok BHD 250 Bar capacity: 66 mm X axis travel: 310 mm Z axis travel: 400 mm Y axis travel: +70 / –50 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Spindle speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Spindle nose: ASA 6 A2 Spindle bore: 73 mm Turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Tailstock travel: 400 mm Machine dimensions: 2,542 x 1,760 x 2,120 mm Weight: 7,500 kg EQUIPMENT: Chuck SMW Autoblok BHD 250 Tool presetter Servo motor for tailstock Tool holder set including 2 driven holders Chip conveyor MACHINE CONDITION: Machine in very good condition. 100% operational. Can be inspected under power.

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Bodpfx Adst Hw N Tjrjwp Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m Bedpfxjyzza Io Adrjwp 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *