Used Operating Resolution for sale (31,718)

Condition: new, Year of construction: 1971, machine/vehicle number: M126, Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Products: oils and oil-based liquids appropriate for gravity/weight filling Condition: NEW Documentation: operating and maintenance manuals included Safety: integrated guards and protections Advanced Automation & Control Systems Each filling station uses an individual load cell to measure and control product dose in real time. The system runs at atmospheric pressure with contactless nozzles to reduce cross-contamination risks and mechanical wear. Typical features include recipe selection for bottle formats and targets, automatic tare, drift compensation, and out-of-tolerance detection with reject signaling. A modern control panel with clear operator interface supports production counters, alarms, and changeover guidance. The electrical cabinet is designed for industrial duty and can be configured to common plant standards; integration with line controls and upstream/downstream interlocks is supported. Safety features include interlocked access doors, emergency stops, and jam diagnostics. Production Line Integration Capabilities This monoblock integrates seamlessly into complete lines alongside rinsing, labeling, coding, case packing, and palletizing systems. It is suitable for both new installations and upgrades where it must connect to an existing used bottling line or second hand equipment. Quick-change format parts support fast shifts among the available bottle sizes, while the cap feeder and 6-head press-on capper are tuned for 28–30 mm closures. The weight-filling architecture is versatile for oil applications and maintains accuracy across minor density or temperature changes. The machine communicates effectively with upstream rinsers and downstream labeling machines common in beverage production and food-grade industrial packaging environments. Hodpfx Apj Adyw Sedjw Machine Condition & Maintenance History The machine is in NEW condition and ready for commissioning. It is supplied with manuals to support installation, operation, and preventive maintenance. Wear components are designed for straightforward access, and the contactless, gravity-based design minimizes mechanical complexity. A recommended spare parts list can be...

Condition: used, This listing is for Fujifilm FLA5100 High Resolution Image Analyser The unit is in full working condition and ready for immediate use This state-of-the-art scanner provides high-performance biomolecular imaging. It features multi-wavelength laser excitation for precise fluorescence and radioisotope detection. [[1]()] Hedezltk Dopfx Apdew Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laborator

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0990200191, For sale is a professional Canon Colorado 1650 UVgel large-format printer for industrial roll-to-roll printing. The machine is in good used condition with typical signs of wear and tear. It can be switched on and displays the status "Ready" on the control panel. IMPORTANT: A test print could not be performed as no printing material is currently available. Therefore, the actual printing function and print quality, as well as the condition of the print heads, could not be fully verified. Technical data * Manufacturer: Canon * Model: Colorado 1650 * Printing technology: UVgel * Maximum material width: 1,625 mm * Printing inks: CMYK (Canon UVgel 460) * Print resolution: up to 1,800 dpi * Matte and gloss printing via FLXfinish+ * Automatic material feed with dual roll system * Professional roll-to-roll large-format printer Operating hours according to display * Material consumed: 29,559.7 m² * Material length: 20,835.9 m * Actually printed area: 22,664.1 m² * Total ink consumption: 247.554 liters The counter readings are documented in the pictures. Condition and features The machine is in good external condition. The mechanics, roll guide, control panel, and ink supply can be seen in the photos. Hedpfx Ae Agu Hkjpdow Four Canon UVgel-460 ink containers (CMYK) are included. No definitive statement can be made about the current fill levels. A complete functional test was not possible due to the lack of printing material. Therefore, the machine is sold expressly as a used device, with the printing function unverified, in its current condition. The machine is of particular interest to advertising technicians, printing companies, large-format printing businesses, or as a source of spare parts. Collection and transport Due to its size and weight of approximately 740 kg, professional collection and suitable transport are required.

Condition: used, Stäubli Type: Stäubli CS7 RX130 Robot with control unit and operating panel The Staubli RX130 is a fast and precise medium payload robot (max. 12 kg) with a maximum arm reach of 1360 mm. It is suitable for machine operation, painting, cleanroom, life sciences, and pharmaceutical applications. The RX130 robot is equipped with the CS7 controller and has a 6-axis articulated arm for maximum flexibility. The robot's spherical work envelope enables optimized use of the robot cell. It can be mounted either on the floor or on the ceiling. The 6-axis RX130 offers high-resolution servos with absolute calibration and a fully enclosed structure, ideal for applications in harsh environments. 3X400V-50/60Hz-5500VA Weight 260kg Condition: used Scope of delivery: (See picture) Hjdpozdittjfx Apdjw (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. This machine boasts a wide range of features that enable users to complete their tasks more efficiently. The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Hodpfjy Nl E Rsx Apdew Printheads can be upgraded by speed up to 16 printheads. Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: used, Year of construction: 2016, operating hours: 2,600 h, functionality: fully functional, • Sensor and resolution: 5.0-megapixel CCD sensor (resolution of 2448 × 2050 pixels). • Connectivity: Integrated Gigabit Ethernet (as well as RS232, RS485, and ID-NET support for high-speed clustering). • Power supply: Operates on 10-30 Vdc, often via dedicated CBX-type connection boxes. • Interface and configuration: Hedpfx Aj Agcw Tspdjw • Physical X-PRESS interface (single push button and 5-level LED bar) for quick adjustments. • DL.Code software for configuration, installation wizard, focusing, and calibration. 12 units in stock.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 23 h, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 410 MC universal machining centre was manufactured in 2023. It features an electronically controlled infinitely variable main drive with a spindle speed of up to 5,000 rpm and a robust spindle power of 13.0 kW. The machine is equipped with hardened and ground flat guideways and automatic mechanical tool clamping. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC machine we have for sale. Contact us for further details. - Demonstation Machine -Machine ON Time: 910 h - Spindle Power S1-100% ED: 6.8 kW - Spindle Power S6-25% ED: 13.0 kW - Spindle Speed (Manual Operation): Infinitely variable 1 - max. 4,500 rpm - Spindle Speed (Automatic Operation): Infinitely variable 1 - max. 5,000 rpm - Feed Drives: Electronically controlled infinitely variable servo drive per axis - Rapid Traverse / Feed Rate X-, Y-, Z-axis: Infinitely variable up to max. 5 / 5 / 5 m/min - Operating Voltage: 400 V - Mains Frequency: 50 Hz - Number of Phases: 3- Rated Current: 24 A - Main Fuse: 32 A - Short-Circuit Breaking Capacity: 10 kA - Power Consumption / Connection Power: approx. 17 kVA - Control Voltage: 24 V - Installation Weight (Base Machine): approx. 1,800 kg (incl. fluids, without options/tools) - Max. Transport Weight: 2,030 kg - Machine Construction: FEM-optimized cast construction in cross-slide design - Guideways: Hardened and ground flat guideways in X, Y, Z with metal covers - Drive System: Ball screws in all axes - Spindle Taper Interface: SK 40 DIN ISO 7388-1 Form AD with pull stud DIN ISO 7388-3 Form AD (SKU: 10-113300) - Vertical Milling Head: Swivel range +/- 90°, manually extendable quill with turnstile, 70 mm stroke, clampable, speed-dependent air cooling, milling cutter guard- Tool Clamping: Automatic mechanical tool clamping, clamping force 10,000 N, hydraulic release - Measuring System: Distance-coded linear measuring systems, direct, incremental, resolution 0.001 mm - Overload Protection: Overload detection via drive and control technology - Safety Handwheels: In all 3 axes - Safety Enclosure: Splash and chip guard cabin mounted on chip tray, moving vertically with axis, limit switch secured, 2 sliding doors front, 1 hinged door right, viewing windows all sides - Control Panel: Mounted on long, swiveling arm at base, rotatable - Lubrication: Automatic central lubrication with initial lubricant filling and front-mounted separate waste oil container - Coolant System: Free-standing reservoir, 66 L capacity (SKU: 10-450111-03) - Machine Lamp: LED flexible arm light - Leveling Elements: 1 set = 4 pieces - Fixed Angular Table: Clamping surface 650 x 375 mm, 5 T-slots 14 H7 (pitch 63 mm), max. load capacity 250 kg (SKU: 10-470050-02) - Control Unit: HEIDENHAIN TNC 620 FS with Functional Safety - Screen: 19" vertical touchscreen - Storage Capacity: 30 GB total, 7.7 GB program memory (Compact Flash CFR)- Block Processing Time: 1. Hsdpfx Ape Af Rqbsdow

Condition: used, Year of construction: 2024, Year: 2024 Condition: very good Technical specification: - Supported Paper Width: 7.086" to 13.385" (180mm to 340mm) - Supported Paper Length: 10.984" to 27.952" (279mm to 710mm) - Media Thickness: 0.14mm (140 micron) to 0.35mm (350 micron) Hodpfx Ao Agvwwjpdew - Feeder Capacity: 4.13" stacker height (up to 1,000 sheets based on 80gsm) - Media Alignment: Self-centering lockable guides - Dual Tool Holder: Yes - Blade Holder (included): Holds cutting blades; 30º, 45º or 60º for range of media types - Creasing Tool (included): Dual ended (wide & narrow) suitable for ≤350 micron card - Calibration Pen (included): Plotting pen used for auto-calibration. Can be used in either mountable location - Cutting Force: Max. 7.60 N (750 gf) delivered in 190 programmable steps - Maximum Speed: 1,060mm/s (41.73"/s) - Mechanical / Programme Resolution: 0.01254mm / HPGL 0.025mm - Registration System: Vision3 High Resolution CCD Vision System - Cut Position Accuracy: +/- 100 microns - Auto Job Recognition: Yes; instant cut file retrieval with QR code job recognition - Power Supply: 100-240V, 50/60Hz, 100W Average (320W peak) - Dimensions: 32.3"W x 33.46"D x 48.43"H - Max Area Required In Use: 32.3" x 51" x 48.43" - Weight: 300lbs - Compatible Standards: Complies with CE and RoHS Directive - Connectivity: USB, Ethernet LAN - ColorCut Pro Software (Included): Sends projects designed in Adobe Illustrator o - CorelDRAW directly to cutter, adds registration marks and QR codes The Intec ColorCut SC6500 is a revolutionary digital die-cutter and creaser, blending flatbed and sheet fed technology for a fully automated cutter and creaser that will cut and crease any shape on media up to 350 microns thick at speeds up to 1,060mm/s. Targeted for users seeking an affordable, compact, high-capacity cutting solution the SC6500 combines ultra-reliable feeding with an instant job retrieval system and flawless high-speed cutting and creasing for complete unattended production. Choose between DIRECT mode (using computer) or HELD mode for standalone operation with USB drive, enabling wireless remote cutting. The ColorCut SC6500 comes equipped with Dual Tool holder for seamlessly cutting and creasing in one pass, as well as industry-leading ColorCut Pro production software, which enables the operator to use Adobe Illustrator or CoreDRAW to easily generate cut files from the artwork. This machine has been designed to provide unattended operation with particular attention paid to the feeding system to ensure class leading performance for card, vinyl labels or even tricky laminated sheets. A revolutionary suction feed belt system, combines with air blades to separate the top sheet for each feed – and the jogging back wedge ensures any stray media is kept under control. Feed continually from the 1,000-sheet stacker with confidence. Using the Vision3 CCD video camera within the tool head, the SC6500 quickly scans SmartMark registration marks created using the ColorCut Pro software to adjust for scale, skew and rotation, automatically adapting your cut lines to fit your job. Additionally, when creating jobs, ColorCut Pro can apply an auto-assigned (editable) QR code to each design, allowing for automatic cut file retrieval for running any number of mixed jobs in the same stack. We highly recommend the Intec ColorCut SC6500 to anyone looking for a commercial-grade digital die-cutting solution with an entry-level price point. This user-friendly, compact machine is perfect for copy shops, schools...

Condition: used, Used Siemens SIMATIC MP 277 Multi Panel with a 10.4-inch TFT color display and a foil keypad for operating and visualizing industrial plants. Manufacturer: Siemens Series: SIMATIC HMI Model: MP 277 10" Key Article number: 6AV6643-0DD01-1AX1 Display: 10.4" TFT color display Resolution: 640 × 480 pixels Colors: 65,536 Operation: Foil keypad Hsdpoz N Hgfjfx Apdew Project memory: 6 MB Supply voltage: 24 V DC Interfaces: RS422/RS485, Ethernet, USB Projecting software: WinCC flexible 2005 Standard SP1 Condition: Used

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Hjdpfez Diq Ujx Apdew Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 900 mm, workpiece weight (max.): 1,200 kg, total height: 3,291 mm, total length: 5,412 mm, total width: 3,760 mm, table width: 630 mm, table length: 630 mm, overall weight: 24,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 13,450 h, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MA-60HA horizontal CNC machining centre, manufactured in 2000 and equipped with an Okuma OSP-U100M CNC control system. The machine is in very good condition and features a high-speed spindle with a maximum speed of 12,000 rpm and a BT40 tool interface. The machine is equipped with a two-pallet system with 630 × 630 mm pallets, a 60-position tool magazine, and a Mayfran ConSep 2000 chip conveyor. The sale also includes more than 80 tools and tool holders, providing a comprehensive tooling package for the new owner. With its high-speed spindle, dual-pallet configuration and extensive tooling package, this Okuma MA-60HA is an attractive opportunity for manufacturers looking for a horizontal machining centre. Technical Specifications Manufacturer: Okuma Model: MA-60HA Year of manufacture: 2000 Machine type: Horizontal CNC machining centre CNC control: Okuma OSP-U100M Condition: Very good Maximum spindle speed: 12,000 rpm Tool interface: BT40 X-axis travel: 1,000 mm Y-axis travel: 800 mm Z-axis travel: 810 mm 4th Axis / Rotary Table Rotary table positioning: 360,000 positions Indexing resolution: 0.001° Pallet system: 2 pallets Pallet dimensions: 630 × 630 mm Tool magazine capacity: 60 positions Manufacturer: Okuma Motor type: VAC-MOTOR Type designation: VAC-YMB15/11-6.5/120-A Peak output: 18/42 kW 30-minute rated output: 15/15 kW Continuous rated output: 11/11 kW Hodpo Ady Iwefx Apdow Via nameplate. Included Equipment Okuma OSP-U100M CNC control system High-speed spindle, up to 12,000 rpm BT40 tool interface Two pallets, 630 × 630 mm 60-position tool magazine More than 80 tools and tool holders Mayfran ConSep 2000 chip conveyor Operating Hours Power-on time: 32,500 hours Control power-on time: 15,340 hours Spindle rotation time: 13,450 hours Cutting time: 11,220 hours Inspection can be arranged by appointment.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. Hedpfo Afgwnjx Apdsw * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Hedpfxs Aayk Ro Apdew Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Hodpfx Ae Af Nzuepdow - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information. Hsdpsxz R T Uofx Apdow

Condition: used, Siemens SIMATIC HMI KTP400 Basic Panel 4" 6AV2123-2DB03-0AX0 Manufacturer: Siemens Product series: SIMATIC HMI Basic Panel Type: KTP400 Basic Article number: 6AV2123-2DB03-0AX0 Display: 4.3" TFT widescreen Resolution: 480 x 272 pixels Hsdpjzxq Nkjfx Apdjw Operation: Button/touch operation Touchscreen: analog-resistive Colors: 65,536 Interface: PROFINET Supply voltage: 24 V DC Typical power consumption: 3 W Programmable from: WinCC Basic V13 / STEP 7 Basic V13

Condition: used, Automated analysis device for gel electrophoresis Laboratory device for the analysis of proteins, hemoglobin, and other components of biological samples. It features an integrated gel scanner for evaluating the results. The SEBIA HYDRASYS 2 SCAN is a professional laboratory analysis system for the automated execution and evaluation of agarose gel electrophoresis. The device combines various work steps such as sample application, electrophoresis, incubation, staining, destaining, drying, and subsequent digitization of the results. Hsdpfx Aj Agwidspdsw It is particularly suitable for use in medical and diagnostic laboratories. Areas of application: - Serum and urine protein electrophoresis - Immunofixation - Hemoglobin analysis - Lipoprotein analysis - Isoenzyme analysis - Clinical laboratory diagnostics Equipment and functions: - Automated processing of agarose gels - Integrated gel scanning unit - Digital image and result acquisition - Touchscreen control - More than 60 HYDRAGEL programs - Software-supported evaluation in conjunction with suitable PC software Technical data: Manufacturer: SEBIA Model: HYDRASYS 2 SCAN Device type: Electrophoresis analysis device Technology: Agarose gel electrophoresis Sample capacity: 1–54 samples per gel Operation: 7-inch color touchscreen Scanner: High-resolution CCD sensor Voltage supply: 100–240 V AC Frequency: 50/60 Hz Power consumption: 1,000 VA PC connection: USB Year of manufacture: “Everything from one source: We will gladly offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Hsdo Aa Aufjpfx Apdow Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW). Hedpjzzz Rdefx Apdsw

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Hodpfx Apj Agfzbsdjw Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: ready for operation (used), Year of construction: 2026, travel distance X-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 128, spindle speed (max.): 4,500 rpm, number of axes: 3, This new 3-axis KUNZMANN WF 610 M was manufactured in 2026. It features a longitudinal travel of 610 mm, cross travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with an electronically regulated main drive for the vertical milling spindle and a rigid angle table with a clamping surface of 800 x 425 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 610 M universal machining centre. Contact us for further details. Hsdpfx Aps Afzixsdsw - New Machine- Main drive: Electronically regulated stepless main drive for vertical milling spindle- Spindle drive power: 8.5 kW (S1 - 100% ED) / 16.2 kW (S6 - 25% ED)- Tool interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 Form AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872)- Feed drives: Electronically regulated stepless servo drive per axis- Rapid traverse rate X / Y / Z: up to max. 5 / 5 / 4 m/min (stepless)- Table type: Rigid angle table (Winkeltisch, starr)- Clamping surface: 800 x 425 mm- T-slots: 6 x 14 H7 (pitch / spacing: 63 mm)- Max. table load: 300 kg- Vertical milling head: Swivelling +/- 90°, manually extendable quill with lever, stroke 70 mm (clampable), speed-dependent air cooling- Tool clamping: Automatic mechanical tool clamping, clamping force 10,000 N (hydraulic release)- Measuring system: Distance-coded linear scale systems, direct, incremental, resolution 0.001 mm- Safety handwheels: In all 3 axes- Electronic handwheel: Portable HEIDENHAIN HR 510 FS with integrated axis selection keys, feed rate potentiometer, and emergency stop button (including bracket on control panel)- Operating voltage: 400 V / 3-phase / 50 Hz- Nominal current / Backup fuse: 20 A / 25 A- Connected load: 13 kVA - Control voltage: 24 V- Base machine installation weight: approx. 2,000 kg (including fluids, without options/tools)- Max. transport weight: 2,100 kg- Coolant system: Free-standing container, capacity 66 liters- Central lubrication: Automatic central lubrication system with separate, easily accessible residual oil container- Work light: LED flexible arm lamp- Machine leveling elements: 1 set = 4 pieces

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Hodpfx Ajxgumcopdsw Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software Hsdoziar Njpfx Apdow OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, resolution (max.): 1,200 dpi, paper weight (min.): 20 g/m², paper weight (max.): 1,000 g/m², paper width (min.): 100 mm, paper width (max.): 600 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 1,000 mm, year of last overhaul: 2023, type of input current: DC, TECHNICAL DETAILS General Information Machine Type: Digital CMYK printer Manufacturer/Model: Trojan3 OPX Year of Purchase: October 2022 Condition: very good, used Location: Denmark Printing System Ink Type: pigmented CMYK ink based on HP technology Maximum Printing Width: 297 mm Printing Speed: max. 27 m/min Printing Resolution: 1,200 × 1,200 dpi Touchscreen: 15.6 inches Hjdpfxsz Sduyo Apdjw Conveyor System Conveyor Belt Widths: 600 mm and 1,000 mm Height Calibration: automatic, 0–100 mm Vacuum Zones: 5 Suction Power: adjustable Feeder Feeder: VF280 High-Speed Vacuum Friction Feeder Maximum Product Size: 495 × 710 mm Software and Operation Software: Trojan Control RIP Operation: Touch panel Operating Condition Usage: used only occasionally Operating Condition: good Inspection: possible by arrangement Test Run: possible by arrangement EQUIPMENT Trojan3 OPX Digital Printer VF280 High-Speed Vacuum Friction Feeder Conveyor System Vacuum conveyor belt with 600 mm width Vacuum conveyor belt with 1,000 mm width Touch panel Trojan Control RIP software

Condition: used, machine/vehicle number: 1484.04.01, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Precision coordinate grinding machine Machine weight: approx. 4.5 t Travel and working area X-axis travel: 700 mm Y-axis travel: 400 mm Workpiece height: 620 mm Internal grinding diameter: 250 mm Axial movement of the grinding spindle: 115 mm Hedpfs Aa Aqasx Apdow Work table Table size: 1,000 × 630 mm Feed and accuracy Feed rate: 0.5–63 mm/min Stroke: 5–100 mm Resolution: 0.001 mm Grinding spindles High-speed spindle: 30,000–60,000 RPM Additional spindle: 12,000–30,000 RPM Planetary spindle speed: 5–250 RPM Slide head Slide travel: ±50 mm Control and operation Digital control: ARKURITE VRO 300 Interface: RS 232 Speed adjustment: electronic, stepless Operating modes: manual and NC operation Performance data Total power consumption: 6 kW Dimensions Space requirement: approx. 2.375 × 2.470 × 2.560 m EQUIPMENT High-speed spindle Second high-speed additional spindle Slide head Feed rate display Digital speed display Electronic stepless speed adjustment ARKURITE VRO 300 digital control RS-232 interface Switch for manual and NC operation Safety emergency stop