Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads Dkolswcfgbeip E Umjl 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm Dkjlist Tqgxjp E Umol turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Dkslijuda Tnsp E Umjl Chip tray Operating instructions

Condition: new, Center length ----- 2000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 baffles * Rapid traverse X,Y * Electric brake Dkolipoga Tvps E Umel * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Fixture plate * Fixed and moving goggles * LED working light * Cooling system * Box with various tools

Condition: good (used), Year of construction: 1960, - Year of manufacture: 1960 - Condition: Used, in very good condition considering its age, fully functional - Dimensions: 2,730 x 1,100 x 1,350 mm (L x W x H) - Max. turning diameter: 630 mm - Max. turning length: approx. 900 mm Emergency stop, key switch, and chuck cover retrofitted, electrical system partially replaced. Accessories: Steady rest, tailstock holder, 4-jaw chuck, soft jaws, centers, small jaw chuck, turning tools (all aligned to center height, as no Multifix is installed), machine feet. Top slide with Multifix can be retrofitted. Delewc Unnoip E Umskl Machine weight: approx. 3.2 t

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MB 500U Djlswc Tb Hsip E Umokl Max. machining diameter: 380 mm Max. machining length: 541 mm Max. milling speed: 4,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - Kitagawa BB-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Delsu E H Iwsip E Umjkl Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: used, Year of construction: 2007, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 360 mm, total height: 2,810 mm, overall weight: 6,500 kg, bar passage: 65 mm, bar diameter: 65 mm, controller manufacturer: SIEMENS, controller model: 840 D POWER LINE, number of spindles: 2, space requirement length: 6,100 mm, space requirement width: 1,690 mm, CONTROLS .. CNC controls SIEMENS 840 D POWER LINE BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 3 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 3 .. number of b-axes: 3 WORKING RANGE TURNING .. turning diameter (max): 140 mm .. bar diameter (max): 65 mm .. worpiece length max.: 600 mm MAIN SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min .. Z-axis travel: 600 mm Dkelip E Ujwc Sxqemol X/Z SLIDE .. Z-axis travel: 360 mm .. X-axis travel: 110 mm .. Y-axis travel: 70 mm .. rotating range B-axis up to: 1 ° .. rapid traverse Z: 45 mm/min .. rapid traverse X: 25 mm/min .. rapid traverse Y: 12 mm/min .. number of tool positions (total): 36 .. number of live positions: 36 .. - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 72 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6100 mm .. space requirements -front/back-: 1690 mm .. total height: 2810 mm .. total weight approx.: 6500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. through spindle coolant attachment: yes .. European CE standards: yes Including bar loader, Profimat 65.8*270/8 year 2005 loading length 500-3000mm. Spindeleinsatzrohren 16,25,30,40,45,55,60,65mm (multi-channel loading magazine) Including chip conveyor Chucks and tools are not included in the scope of delivery.

Condition: reconditioned (used), Year of construction: 2015, CNC lathe HURCO TMX 10 MYSi With HURCO MAX control Dksletppkbsip E Umsl Year of construction: 2015 Turning diameter over bed: 560 mm Travel in X: 220 mm Travel in Z: 670 mm Travel distance W axis: 740 mm Travel distance Y axis: + /- 55 mm Spindle bore: 77 mm Speed range: 20 - 3500 rpm With the following accessories: Sliding guard with interior lighting 12-slot turret with 12 driven stations (VDI 40) Various VDI 40 tool holders Various driven tools VDI 40 Tool measuring device Electronic handwheel Parts pick-up device Y axis + / - 55 mm Counter spindle 6000 rpm with jaw chuck Kitagawa 0 200 mm 3 jaw chucks Hydraulic 0 250 mm with foot switch Chip conveyor Oil mist extraction Status light Coolant device Operating instructions

Condition: good (used), Functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,700 mm, faceplate diameter: 2,500 mm, rotational speed (max.): 110 rpm, rotational speed (min.): 2 rpm, power of the servo motor: 75,000 W, Titan SC 27 Vertical Lathe with: - 4-jaw manual chuck diameter 2500 mm - maximum load allowed in the chuck 15000 kg Dolip E Uowc R Ausmekl - maximum turning diameter 2700 mm - maximum turning height 2300 mm - ICEM CNC Free extension in 12/24 months

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Dkolip E Uswc Rvzjmsl -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Adapter: -Short cone: size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition Djlip E Uewc Nyxomokl

Condition: good (used), Short bar loader magazine LM 1200. Year of manufacture 11/2005. Very good condition – 100% functional. Available immediately. Dsliewfuntjp E Umjkl

Year of construction: 2006, Condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Dkelipjwftcvs E Umjl

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Dkjlijuzyw Dop E Umol Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, Functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Dolip Eowfr R Ee Umjkl Robot interface

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg Dslijuwv Tgjp E Umjkl dimensions of the machine ca. 2,5 x 1,4 x 1,75 + Irco m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 23.471h Running hours 21.495h GBL function (standard) LFV function: no

Condition: excellent (used), L & Z Lathe Center distance 1500 mm Center height 280 mm with digital display, with 2 axes 15 speeds from 24 - 2000 rpm Tool holder Parat WD 21/25 Transport dimensions: Length 2800 mm Width 900 mm Dkelowc Nt Seip E Umsl Height 1700 mm

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Siemens control system Control cabinet cooling unit Has been inspected Work completed: Main and counter spindle belts checked! Geometry completely measured and adjusted. New drive modules and E/R module Dkolipsv I Udns E Umsl Some work is still being done on the machine.

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm Dkjlipowc Dzwe E Umel --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev Quick clamping device, 10 x collets, 3 - jaw chuck Multifix steel holder size B, 8 x inserts 2 x travelling steady rest, 2 x chuck flange Multiple stop, machine feet Operating instructions

Condition: reconditioned (used), Year of construction: 2023, Cycle-controlled lathe GILDEMEISTER NEF 520 Delip E Uouq Ebrsmjkl With MANUAL PLUS 4110 control Year of manufacture: 2003 Spindle bore: 70 mm Center distance: 1500 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting MULTIFIX tool holder with 10 pcs. inserts 3 jaw chucks FORKARDT 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip conveyor Coolant device Operating instructions

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Deliowfrk Sjp E Umokl Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 EQUIPMENT/ACCESSORIES  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, MORI SEIKI NLX 2500 SY/1250 in very good condition. Basic machine data: CNC high-performance lathe C-axis for main and counter spindle Manufacturer: MORI SEIKI Model: NLX 2500 SY / 1250 Year of manufacture: 2013 - MORI-APL (MORI-Automatic Programming System for Lathe) - Dongle - MARPOSS tool calibration - LTA oil mist extraction system - Knoll belt filter system - Numerous tools included Operating time: 8338 h Machining time: 4630 h Short bar loader: FMB SL 80 S Control system: Name: M730BM with MAPPS IV Manufacturer: Mitsubishi Type of CNC control system Technical details Working area: Turning diameter: 366 mm Max. turning length: 1255 mm Main drive: 1 Drive power (100% duty cycle) 15 kW Drive power (40% duty cycle) DC) 18.5 kW Speed range from - to 4000 rpm Dkslip Ejwfrkls Umel Main drive 2 Drive power (100% DC) 7.5 kW Drive power (40% DC) 11 kW Speed range from - to 6000 rpm Turning spindle (left) Spindle bore 91 mm Bar diameter 80 mm Turning spindle (right) Spindle bore 43 mm Slide 1 Longitudinal travel 1345 mm Cross travel 260 mm Vertical travel Y +/-50 mm Rapid traverse in X 30 m/min Rapid traverse in Z 30 m/min Rapid traverse in Y 10 m/min Tool holder 1 Number of Tool stations: 12 Maximum speed: 6000 rpm Maximum power (100% duty cycle): 3.7 kW Maximum power (40% duty cycle): 5.5 kW Installation dimensions: approx. (width x depth x height): 4.33 x 2.15 x 2.24 m Weight: approx. 8000 kg Equipment: KITAGAWA BB210A821 + KITAGAWA SS1881K21 hollow clamping device for the main spindle Power clamping device for the work spindle as a replacement for the standard clamping device, consisting of: - Hydraulic three-jaw power chuck with through-hole, type "Kitagawa BB210A821", diameter 254 mm, through-hole 81 mm, max. speed: 4,500 rpm - Drawbar for a maximum bar diameter of 80 mm - Hydraulic Hollow clamping cylinder, type "Kitagawa SS1881K21", Through 81 mm - Anti-rotation device and clamping travel monitoring (GS) Clamping device KITAGAWA B208A521 + HOWA C1SB115M4774 Tailstock specification for counter spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right-hand discharge Hinged belt chip conveyor with rollers in the version on the right side of the machine with an approx. 1,000 mm discharge height, including adjustment control Double foot switch with protective cover for main and counter spindle Foot switch for chuck operation on the main and counter spindle in the version with two pedals instead of the standard version with one pedal Can be inspected under power and is immediately available. Machine has only been running on oil!

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale Dkelip E Uov I Uavemol + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Circulation O over bed: 435 mm O rotation over cross slide: 200 mm Center height: 210 mm Speed range: 1 - 3500 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool drive C axis via main drive 3 jaw chucks Schunk ROTA plus 0 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Dkelip E Uevkd Inomel Tailstock with extendable drilling quill Coolant device reinforced 5.5 bar Coolant spray gun Chip collection tray 5 pcs. Height-adjustable machine shoes Operating instructions