Cnc lathe
HEMBRUG Mikroturn 100 CNC

Name: HEMBRUG Mikroturn 100 CNC
Brand: HEMBRUG
Availability: InStock

Year of construction

2004

Condition

Used (fully functional)

Location

United States

Machine data

Machine type:: Cnc lathe

Manufacturer:: HEMBRUG

Model:: Mikroturn 100 CNC

Year of construction:: 2004

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 1,000 h

Price & Location

Location:: Idaho, USA

Call

Technical details

Turning diameter over cross slide:: 380 mm

Turning length:: 350 mm

Turning diameter:: 200 mm

Travel distance X-axis:: 240 mm

Rapid traverse X-axis:: 12 m/min

Details about the offer

Listing ID:: A18944161

Reference number:: BO 112

Update:: 07.05.2026

Description

Hembrug Mill-Turn Machine
Model: Slantbed Mikroturn 100 CNC
Siemens 840D Control
Approximate Actual Run Time Hours: 1,000
Hydeostatic Spindle
Hydrostatic Ways
Scale Feedback
Suspended Granite Bed
Garnite Spindle Housing
Coolant Pump
Coolant Circulation Pump
Pneumatic Bearing Purge
Hydraulic Temperature Control
Coolant Temperature Control
Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit.

Options & Additional Purchased Features:
Tailstock
Vacuum Pump for Vacuum Chucking
Programable Controlled Spray Mist
C-Axis Milling / Drilling
Renishaw Tool Touch Probe
Non-Contact Tool
Incoming Air Dryer / Filter

Thousands of Dollars of Brand New Tooling:
Live Center
Iiodpfjwcfgbjx Aqusc
Tailstock Taper Adapter
8” Micro-Centric Pneumatic Chuck
3 Sauter Straight Live tooling heads
2 Sauter 90 degree Live tooling heads
1 Special VDI offset Tooling holder
16 VDI Tool Holders for Turning, boring, and on center drilling.
Tool Pick-up Video System
Extra Siemens Control Pannel
Complete Set of Manuals

Machine Upgrades I added at additional cost.
New Digital Hard Drive
New Backup Hard Drive with software already loaded, plug and play ready, no downtime.
New Z-Axis Heidenhain Scale
Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking.
Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing.
50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Documents

18944161-01.pdf

Seller

Last online: Today

Registered since: 2020

10 listings online

Call

Send inquiry

Telephone & Fax

+44 1604 ... show

These listings may also fit your interest.

Listing

Zuchwil

18,807 km

Automatic lathe
STAR MicronicsSV-20

Call

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Iedpfx Aqou Uic Tjuoic Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

See details

Listing

Multispindle Lathe Schütte AG20 Schütte AG20

Berlingo

18,708 km

Multispindle Lathe Schütte AG20
SchütteAG20

Call

Listing

CNC turning and milling center Nakamura-Tome NTJX

Root

18,756 km

CNC turning and milling center
Nakamura-TomeNTJX

Call

Listing

Korschenbroich

18,583 km

CNC Lathe
SPINNERTC 108

€14,000

Fixed price plus VAT

Call

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 Isdpfjucgyljx Aqueic number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

See details

Listing

Center hole grinding machine TECHNICA ZSM 5100

Beringen

18,712 km

Center hole grinding machine
TECHNICAZSM 5100

Call

Listing

Voumard grinding spindles, REFU HF frequency converter Voumard Schleifspindeln REFU HF

Pfaffenhofen

18,607 km

Voumard grinding spindles, REFU HF frequency converter
VoumardSchleifspindeln REFU HF

Call

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 Iisdsl Tn Afjpfx Aqusc 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

See details

Listing

Schmölln

18,293 km

Coiler
GSWLHM 80/650

Call

Listing

Wiesbaden

18,584 km

Optical dividing head
Zeissunbekannt

Call

Listing

Vertical turret lathe DMG MORI CTX Beta 800 TC

Czech Republic

18,106 km

Vertical turret lathe
DMG MORICTX Beta 800 TC

Call

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Power: approx. 19–22 kW Iiedjy Rgafspfx Aquoc Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

See details

Listing

Surface Grinding Machine - Horizontal ELB-ORION 1555

Ennepetal

18,538 km

Surface Grinding Machine - Horizontal
ELB-ORION1555

Call

Condition: used, Year of construction: 1990, grinding length 1500 mm grinding width 550 mm workpiece height 400/450 mm table-size 1900 x 450 mm mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min Iijdpewlvirjfx Aquoc total power requirement 15 kW voltage 380 V weight of the machine ca. 5 t Machine was reconditioned and modernized in 2015 with modern control. Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

See details

Advertise here