Condition: excellent (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Dkslq Soukgacjn Sqel Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001° Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Swing diameter 450 mm Swing diameter over turret 375 mm Turning diameter 250 mm Turning length 455 mm Travel distance - x 190 mm Travel - z 480 mm Bar diameter 65 mm Speed 3000 rpm Weight 3800 kg Equipment: - FANUC control - 3-jaw chuck - 12-position turret VDI 30 - C-axis - Driven tools - Tool measurement in the machine - tailstock - chip conveyor Djlq Sn Sot N Tlcoqokl - coolant device - parts catcher Operating hours: 4,173 h

Year of construction: 2001, Condition: good (used), Universal CNC Turning Lathe from Pinacho apply for toolmaker , mold maker, education and Locksmith Turning diameter : 360mm Control : Fagor 8055 Technical data Turning diameter 360mm Turning lenght 1000mm Control Siemens Fagor 8055 Tailstock MK 3 Tools Barufaldi 6 pice Speeds 1-4000U/min Power supply 380V - 5,5 KW Contact person: AWM GmbH Dkjlq Snofglzgo Sqsl Herr Mario Wurm

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. Dkelqewf Afts Sn Sqel 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Condition: excellent (used), Multifix base body D 1 with 9 interchangeable inserts Stock number (28617) 2 x D 65 x 180 2 x D 50 x 180 3 x D 40 x 180 Dkolq Sswf Afyon Sqol 1 x J 63 x 180 1 x H 63 x 180 1 x sleeve 63 x MK 5 (L 563) Weight 100 kg

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min Dkelq Sn Sowf Acleqjl C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Colchester Mastiff Gap Bed Centre Lathe Maximum Distance Between Centres 1000mm Maximum Swing Over Bed 535mm Maximum Swing over Gap 810mm Spindle Bore 90mm Spindle Speeds 20-1400 rev/min Motor 12.5 HP Supplied with: Dual Dials Quick Change Tool Post 3 Jaw Chuck Coolant New Digital Readout Dolqjvllk Tj Sn Sqekl For sale with Jet Machinery Ltd Jet Machinery Stock No: #78850 Machine Serial Number: 8/0211/06270 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: good (used), Year of construction: 1987, operating hours: 53,861 h, Functionality: fully functional, CNC lathe Make: TRAUB Type: TNA 480 L with TX8D control Rotation diameter longitudinal slide: 660mm Dkjlq Sn Ssua I A Aeqsl Rotation diameter cross slide: 445mm Turning length: 2000mm Chuck diameter: 250/315mm Spindle clearance: 80/100mm Total weight: 9500 kg With 2 steady rests.

Year of construction: 2020, Condition: as good as new (ex-display), Turning Diameter 410mm Turning lenght 1000mm CE-certification verifies the best possible safty all Machines in over-floor construction Spindle Speeds 3000U/min Center width 1000mm Turning Ø over Bed 410mm Turning Ø over Support 255mm Turning Ø in Gap ----- Speed / Range 50-3000 U/min / Stufenlos Tailstock Taper MK 4 X axis Feeds 0,025-085mm/U Y axis Feeds 0,05-1,7mm/U Djlq Sjf Hmqhjn Sqjkl Motor 5,5KW

Year of construction: 2020, Condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Dkolqsv Tfk Aj Sn Sqsl Application Types Turning

Condition: excellent (used), Multifix base body Size C with 6 interchangeable holders and lever (28616) 3 x CD 45 x 170 1 x CD 32 x 170 1 x CD 32 x 150 Delq Sewf Afgsn Sqekl 1 x MK 5 Weight 34.5 kg

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Dslq Snjwfynfs Sqskl Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: ready for operation (used), Year of construction: 2006, XYZ 1340 Trainer Lathe Max’ Distance Between Centres 1000mm Max Swing over Bed 330mm Max’ Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2006 415V Electrics Supplied with: 3 Point Fixed Steady 2 Point Travelling Steady Jaws Tool Holders as Pictured Djlq Snewfn H Ns Sqokl Change Gears Lifting Bracket FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78921 Machine Serial Number: 9963 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101197, Used CNC vertical lathe Make: EMAG Dkoljv Hp Dmjq Sn Sqsl Type: VTC 250 Year of manufacture: 2008

Condition: like new (used), Face plate, cast iron, RÖHM make Diameter: 500 mm Through: 90 mm Mounting: DIN 55027 / KK 6 including mounting bolt Condition: very good, item appears to be unused, just dusty – sold as used! Dkjlqswfylks Sn Sqjl .

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, cutting width (max.): 1,300 mm, This heavy duty turning lathe is located at a renowned Bulgarian shipbuilding company and is being replaced by a new machine from SAFOP. It is available for immediate inspection. Manufacturer: WOHLENBERG Model: UE 1400 III Center height: 750 mm Center distance: 7000 mm Swing diameter over bed: 1300 mm Swing diameter over faceplate: 550 mm Swing diameter over cross slide: 1000 mm Feed rate: 60 m/min Tailstock quill taper: MK6 Z-axis travel: 7500 mm X-axis travel: 1000 mm Max. workpiece weight: 21,000 kg Tool holder: Capto, various extensions Tool magazine (number of tools): 3 Standard tool list: no Max. spindle speed: 300 rpm Power: 75 kW Dkolq Sjwg Sc Dsn Sqsl Condition: Very good (immediately operational)

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm Dolqsvvtpxo Sn Sqekl rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-AXLE. The tool turret does NOT have a holder for driven tools Distance spindle to counter spindle = 1050mm Counter spindle: A2-6, travel 800mm, spindle Ø 105mm, torque 250 Nm Switch cabinet equipped with Rittal cooler with hinged belt chip conveyor chip tray compressed air gun Machine currently has NO lathe chuck! *

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead and pull spindle lathe Weiler Commodor *partially overhauled* Item number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter of bed: approx. Ø380mm Max. turning diameter support: approx. Ø190mm Max. turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed ​​range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic longitudinal and planar feeds: Feed range: approx. 0.011-0.80 mm/rev Suitable for threads: metric 0.30-10mm inch 80-2 3/4 G/'' Diametric pitch thread 80-5.5 Dp module 0.2-5 Tailstock: MK4 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 200mm *New* Quick-change holder size B + 1 insert Bed stop Work light *New* Coolant system *New* Dkolq Sovkv Iyon Sqol Complete documentation NOT – Off Various tension wrenches Electric feed protection *New* Drill chuck *Optional* Revolving tip *Optional* Lead and pull spindle cover *Optional* Collet device 173E *Optional* Collet set 173E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: good (used), Year of construction: 1996, Harrison M550 Gap Bed Centre Lathe Max’ Distance Between Centres 3000mm Max Swing over Bed 550mm Max’ Swing over Gap 830mm Spindle Bore 104mm Spindle Speeds 18– 1400 rev/min Spindle Motor 11Kw. Tailstock MT5 Manufactured 1996 Dkolq Snsuy T Dbs Sqol Supplied with: 3 Jaw Chuck 4 Jaw Chuck 3 Point Fixed Steady Quick Change Tool Post For sale with Jet Machinery Ltd Jet Machinery Stock No: #78822 Machine Serial Number: 5M0048 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: excellent (used), Passage: 120 mm Mounting: DIN 55027 / KK 8 Diameter 625 mm Dsljwfyk Hoq Sn Sqokl

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 700 mm turning diameter over support: 350 mm turning length: 3000 mm center height measured in bed: 320 mm spindle bore of work spindle: 70 mm spindle speed max.: 10 - 1250 / 24 step U/min cross feed: 0,0256 ... 0,378 mm/U longitudinal feeds:: 0,064...1,025 mm/U tailstock quill adjustment:: 240 mm tailstock taper MT: MK5 total power requirement: 14,0 kW Dkolq Snou Trb As Sqol weight of the machine ca.: 5,0 t dimension machine xH: 5,1 x 1,8 x 1,6 m Travel Support: Support lengthwise=3000mm Support transverse=400mm Tool support=220mm Tool slide can be swiveled 90° right/left Equipment: digital path measuring device Heidenhain 4-fold tool holder machine lamp Coolant device with pump Accessories: 1x steady rest open 160mm and 1x steady rest closed 400mm 3-jaw chuck Ø 335 with soft jaws 18 sets of used, soft jaws *

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Lead and pull spindle lathe Weiler Intern 160 *Partially overhauled Item number: 04-03-218 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kgDigital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter over support: approx. Ø198mm Max. turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed ​​range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm Inch 80 – 2 Gg/” Diametrically - pitch thread 200 - 5 Dp module 0.2 - 4 Tailstock: MK3 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 160mm *New* Quick-change holder size A + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover Drill chuck *Optional* Revolving tip *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change holders *Optional* Further accessories on request Delq Sjhd Uubjn Sqskl Price and further technical data on request

Condition: excellent (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm Tailstock 10” Chuck Swarf Conveyor Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dkolq Sn Soukgbtjqol

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg Dkjlqjvbhiqe Sn Sqol max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. *

Condition: excellent (used), Year of construction: 2007, operating hours: 10,762 h, Functionality: fully functional, CNC TURNING-MILLING CENTER YCM GT-250 MA Item number: 04-02-092 Manufacturer: YCM Very good overall condition Machine workshop tested Delivery time: Immediate - subject to prior sale Year of manufacture: 2007 Dimensions (L x W x H): 3,700 x 2,400 x 2,100 mm Weight: approx. 6000 kg Operating hours: approx. 10,762 Max turning diameter: approx. 270 mm Max turning length: approx. 560 mm Travel X-axis: 230 mm Travel Z-axis: 560 mm Including accessories: Yes Integrated C-axis: Yes Control: Fanuc TXP-200e Number of tool positions: 12 Number of driven tool positions: 12 Number of controlled axes: 2 Spindle bore: 62 mm Tool holder: VDI 40 Speed range: 20-6000 rpm Total drive power: 15 kW Accessories: Dkslq Sn Sev Hqikjqel 3-jaw chuck Various jaws Tool measuring probe Collet chuck device + collets Various wrenches Various tools Various milling cutters / drills / turning tools Documentation Chip conveyor Tool cabinet Spindle stop Tool holders Further accessories on request Price and additional technical data on request.