Used Internal threading machines | nominal diameter size M13 - M20 for sale (20)

Condition: used, Year of construction: 2016, throat ca. 2000 mm total power requirement 0 kW weight of the machine ca. 0,2 t Cjbvsv Da U Djhw Tyegt dimensions of the machine ca. 1,3*0,8*2,2 m

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Cjbvhw Tjpag Npsyogt Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: used, Year of construction: 2007, thread capacity M 16 threading depth 80 mm throat 250 mm table-size 400 x 500 mm spindle turning speed range 280 + 1800 U/min quill stroke 80 mm thread capacity min. M 4 mm dayligth 315 mm spindle taper B 18 thread capacity in Alu: M 22 total power requirement 2,2 kW weight of the machine ca. ca. 220 kg Cgjbvhsvrrahow Tyst dimensions of the machine ca. 1,5 x 0,9 x 2,25 m Automatic thread cutting machine in table design, tapping with hand feed - semi- automatic - and fully automatic operation (single and continuous stroke), threading with conductive cartridge, tap breakage protection, brake motor, faster return, extended column adjustable (largest distance from table surface to lower edge of quill 780 mm), intervention protection secured by a magnetic switch. The appropriate pulleys must beavailable for the individual speeds (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2 pulleys for the speeds 280 + 1800 rpm. Other belt slides, clamping inserts for drill chucks and conductive cartridgesare available from the manufacturer. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM Technologie, year 2007, 24 V. Prepared for weight compensation for multi-spindle drilling heads with flange quills. Machine comes from a workshop for the disabled and was only rarely used for one product. Please notice that the price of this machine new is € 18500,--! Machine dealer with own stock of 1600 m².

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Max. working height: 1100 mm Hole table: 360 x 500 mm Drilling depth max.: approx. 500 mm Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Cgjbvhw Toi Nnutjyet Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Condition: new, - Capacity M3-M16 - Electrical - touch screen - PLC control - Variable speed control - Working range 1000 mm - Quick change fixture - Including 8 water tap pots - Documentation - 230V Csbvhwslzch Ns Tyjgt - Without work table (extra charge for work table)

Condition: new, Year of construction: 2025, ELECTRIC TAP ARM ETM 24 thread taps from M6 to M24 working range 1200 MM Electric tapping machine equipped with: - Touchscreen - PLC control - Variable speed control 0-200 RPM Advantages: Electric, more energy-efficient compared to pneumatic machines Very powerful servo motor Produces considerably less noise than pneumatic machines Easy to set pitch, depth and speed via touchscreen Can be used in horizontal and vertical position Features: Anodized parallel arms Can be set in different languages Pivot points equipped with bearings Equipped with gas springs for easy use Low voltage with no-load protection Overload protection Supplied with: 9 tapping pots M5/6, M8, M10, M12, M14, M16, M18, M20, M22/24 Manual Optional: Mobile work cabinet with cast iron top with T-slots Cgebjvyhg Tsvhw Tyst Also available in M10 M12 M16 and M36. PRICE NOW ONLY 1199,=

Year of construction: 2000, Condition: good (used), Offer 20158 Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar Cgebvhwopvkm Tj Tyet - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: new, Year of construction: 2025, The electric threading machine is a compact and efficient threading device, used both in large production plants and small workshops. Thanks to the high-torque servo drive and swivel head, it enables fast and precise thread cutting. Equipped with a blow-through cooling system, the threading machine ensures optimal visibility of the drilled hole. The threading arm has 2 operating modes: automatic and manual. Cebvhwsvvlkzj Tyogt Description of the RGE16PW threading machine The electric threading machine is a versatile threading device that is used in both large production plants and small workshops. Its main advantage is shortening the time of threading operations, making the process much more effective. The threading machine has a simple and compact design, equipped with a swivel head, which increases the possibilities of its use. The device is driven by a high-torque servo drive, which ensures strong and reliable operation. In order to operate the device, the threading arm is equipped with a touch control panel with a menu available in Polish. This intuitive panel allows you to easily program threading parameters such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spraying system, which is used for constant cooling with minimal consumption of cooling lubricant. In addition, the device is equipped with a chip blower, which ensures optimal visibility of the drilled hole. The tapping arm is equipped with a quick-mount holder that allows easy and quick attachment of taps to through and blind holes. Additionally, the device has a rotating motor unit that allows thread cutting at any angle ranging from 0° to 90°. Compared to manual threading, the threading machine offers greater accuracy and reliable threading while maintaining a right angle (90°). Collets for taps are equipped with adjustable overload clutches. The couplings in the sleeves are pre-adjusted to standard torque values ​​for specific tap sizes, but these settings can be corrected using a special key included in the set. It also includes a large radius swivel arm that makes it easier to position the tap on the workpiece, ensuring precise and efficient thread cutting. It is intended for cutting threads in various materials such as steel, stainless steel, aluminum and non-ferrous metals. An electric threading machine is a reliable and effective tool that speeds up the threading process, improving the precision and quality of threads. Thanks to its versatility and ease of use, it is used in various industries, from industrial production to craft workshops. Thanks to the use of modern technologies and solid construction, the threading machine ensures not only time savings, but also long-term efficiency and durability. It is an indispensable tool for professionals who require fast, precise and reliable threading in their work. The set includes tap holders: M3, M4, M5, M6-8, M10, M12, M13, M16 The machine is sold without a work table, vice and taps Technical parameters Power 0.6 kW Power supply 230V Weight 30 kg Max. arm reach 1080 mm Max. Rotational speed 375 rpm.

Condition: new, Year of construction: 2024, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files Csbvhjrbz T New Tyegt - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 Csbvhwjt Dwtge Tyogt • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German * without the perforated table as per Fig.

Year of construction: 1990, Condition: used, thread dia. M5 - M10 mm Tools speed 320 - 1600 U/min Cgobvhjnq R Uuow Tyot table-size 330 x 290 mm throat 215 mm voltage 380 V threading length mm total power requirement 0,55 kW weight of the machine ca. 300 Kg dimensions of the machine ca. 1,2 x 0,8 x 2,0 m Tapping machine including: machine base footswitch vice different tools see pictures

Condition: new, Year of construction: 2024, Functionality: fully functional, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 1,100 mm, overall weight: 30 kg, Electric Tap Arm / Tapping Machine ETM16 thread taps from M3 to M16 working range 1100 MM Electric tapping machine equipped with: - Touchscreen - PLC control - Variable speed control Weight 30 kg Tapping capacity M3-M16 Speed 0-312 rpm Working range 1100 mm Advantages: Electric, more energy-efficient compared to pneumatic machines Very powerful servo motor Produces considerably less noise than pneumatic machines Easy to set pitch, depth and speed via touchscreen Can be used in horizontal and vertical position Features: Anodized parallel arms Can be set in different languages Pivot points equipped with bearings Equipped with gas springs for easy use Low voltage with no-load protection Overload protection Cgsbvhw Tou E I Raeyot Supplied with: 8 tapping pots M3,M4,M5,M6-M8,M10,M12,M14,M16. Manual Optional: Mobile work cabinet with cast iron top with T-slots Also available in M10-12-24-30-36 and 48. PRICE NOW 799,=

Year of construction: 2010, Condition: good (used), machine/vehicle number: 8298-5 + 1357075, Offer 20142 Technical data: - Tapping capacity up to approx. M 16 Csbvhwjpahn Hj Tyogt - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1700 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. Cgjbvhovugrqsw Tyet The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1700mm Max. rotation speed 125 rpm

Year of construction: 2022, Condition: new, pneumatic tapping arm Model: R1450-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmax 1450mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1450-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 1450mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1450-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1450-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1450-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Cgobvoipmrkohw Tyet Model: R1450-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 1450mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Cgebvsfg U Siehw Tyet Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: new, Year of construction: 2025, Characteristics of the RGE36PWx1200 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. Cgjbvsvugq Tjhw Tyjt The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1200mm Max. rotation speed 125 rpm

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Csbvhwjfg U Sqo Tyegt Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: new, Year of construction: 2025, The electric threading machine is a versatile threading tool, ideal for both large factories and small workshops. It has a simple and compact design with a movable head and a high-torque servo drive, which ensures strong and reliable operation. The threading machine offers easy and quick tap mounting, adjustable thread cutting angle and adjustable collets. The threading machine model is equipped with an oil dispenser and a blower to blow away chips. The machine has a touch control panel with a menu in Polish. The threading arm has 2 operating modes: automatic and manual. It is intended for threading various materials. Characteristics of the RGE30PW threading machine Csbjvughxsvhw Tyjgt The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is the reduction of the time needed for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device's drive is based on a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading arm is equipped with a touch control panel with an intuitive menu in Polish . This panel allows you to easily program threading parameters such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spraying system that effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower that removes chips, ensuring good visibility of the drilled hole. The threading machine arm has a quick-mount holder, enabling easy and quick mounting of taps in both through and blind holes. The threading head can be adjusted both vertically and horizontally by 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability while maintaining a right angle (90°). The threading machine's collets are equipped with adjustable overload clutches. The threading machine set includes DIN tap holders with sizes from M6 to M30, which provides a wide range of applications for various thread sizes. They are set to standard torque values ​​for various tap sizes, but it is possible to adjust these settings using a special wrench that is included in the kit. The electric threading machine is designed to create threads in a variety of materials such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of threads. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. The set includes DIN tap holders: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30 The machine is sold without a work table and taps. Technical parameters Power 1.2 kW Power supply 230V Libra 50 kg Max. arm reach 1200 mm Max. Rotation speed 156 rpm

Condition: new, thread dia. 12 mm max. 600 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg Cjbvjfg U Sushw Tyjgt Electric tapping machines for M3 - M12 threads, 8 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English! Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base.