Condition: good (used), Short bar loader magazine LM 1200. Year of manufacture 11/2005. Very good condition – 100% functional. Available immediately. Cgjbvswfuntep E Abst

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Cgobvp E Ajwcfgbsbst Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm Cobvp Ejwb Hx Ao Abjgt rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t Cgsbvp Ejt Tqgxo Abst

Condition: good (used), Year of construction: 1960, - Year of manufacture: 1960 - Condition: Used, in very good condition considering its age, fully functional - Dimensions: 2,730 x 1,100 x 1,350 mm (L x W x H) - Max. turning diameter: 630 mm - Max. turning length: approx. 900 mm Cgsbvewc Unnop E Abst Emergency stop, key switch, and chuck cover retrofitted, electrical system partially replaced. Accessories: Steady rest, tailstock holder, 4-jaw chuck, soft jaws, centers, small jaw chuck, turning tools (all aligned to center height, as no Multifix is installed), machine feet. Top slide with Multifix can be retrofitted. Machine weight: approx. 3.2 t

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MB 500U Max. machining diameter: 380 mm Max. machining length: 541 mm Max. milling speed: 4,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - Kitagawa BB-210 three-jaw chuck, 254 mm diameter - Tool Eye - C-axis - Bar feeder interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump Csbswc Tb Hsvp E Abjgt - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Cebsu E H Iwovp E Abogt Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: used, Year of construction: 2007, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 360 mm, total height: 2,810 mm, overall weight: 6,500 kg, bar passage: 65 mm, bar diameter: 65 mm, controller manufacturer: SIEMENS, controller model: 840 D POWER LINE, number of spindles: 2, space requirement length: 6,100 mm, space requirement width: 1,690 mm, CONTROLS .. CNC controls SIEMENS 840 D POWER LINE BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 3 Cobvewc Sxqsp E Abogt .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 3 .. number of b-axes: 3 WORKING RANGE TURNING .. turning diameter (max): 140 mm .. bar diameter (max): 65 mm .. worpiece length max.: 600 mm MAIN SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min .. Z-axis travel: 600 mm X/Z SLIDE .. Z-axis travel: 360 mm .. X-axis travel: 110 mm .. Y-axis travel: 70 mm .. rotating range B-axis up to: 1 ° .. rapid traverse Z: 45 mm/min .. rapid traverse X: 25 mm/min .. rapid traverse Y: 12 mm/min .. number of tool positions (total): 36 .. number of live positions: 36 .. - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 72 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6100 mm .. space requirements -front/back-: 1690 mm .. total height: 2810 mm .. total weight approx.: 6500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. through spindle coolant attachment: yes .. European CE standards: yes Including bar loader, Profimat 65.8*270/8 year 2005 loading length 500-3000mm. Spindeleinsatzrohren 16,25,30,40,45,55,60,65mm (multi-channel loading magazine) Including chip conveyor Chucks and tools are not included in the scope of delivery.

Year of construction: 2006, Condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Cobvp E Aewftcvsbjgt

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, Functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm Cgobvpowfr R Ee E Abot ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: good (used), Functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,700 mm, faceplate diameter: 2,500 mm, rotational speed (max.): 110 rpm, rotational speed (min.): 2 rpm, power of the servo motor: 75,000 W, Titan SC 27 Vertical Lathe with: - 4-jaw manual chuck diameter 2500 mm - maximum load allowed in the chuck 15000 kg - maximum turning diameter 2700 mm - maximum turning height 2300 mm - ICEM CNC Cgsbvp E Aswc R Auebst Free extension in 12/24 months

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Cgebvowc Rvzjp E Abjt -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Adapter: -Short cone: size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Siemens control system Control cabinet cooling unit Has been inspected Work completed: Main and counter spindle belts checked! Geometry completely measured and adjusted. New drive modules and E/R module Cjbvp Eov I Udne Abegt Some work is still being done on the machine.

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Cgebowfrk Sovp E Abet Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 EQUIPMENT/ACCESSORIES  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, MORI SEIKI NLX 2500 SY/1250 in very good condition. Basic machine data: CNC high-performance lathe C-axis for main and counter spindle Manufacturer: MORI SEIKI Model: NLX 2500 SY / 1250 Year of manufacture: 2013 - MORI-APL (MORI-Automatic Programming System for Lathe) - Dongle - MARPOSS tool calibration - LTA oil mist extraction system - Knoll belt filter system - Numerous tools included Operating time: 8338 h Machining time: 4630 h Short bar loader: FMB SL 80 S Control system: Name: M730BM with MAPPS IV Manufacturer: Mitsubishi Type of CNC control system Technical details Working area: Turning diameter: 366 mm Max. turning length: 1255 mm Main drive: 1 Drive power (100% duty cycle) 15 kW Drive power (40% duty cycle) DC) 18.5 kW Speed range from - to 4000 rpm Main drive 2 Drive power (100% DC) 7.5 kW Drive power (40% DC) 11 kW Speed range from - to 6000 rpm Turning spindle (left) Spindle bore 91 mm Bar diameter 80 mm Turning spindle (right) Spindle bore 43 mm Slide 1 Longitudinal travel 1345 mm Cross travel 260 mm Vertical travel Y +/-50 mm Rapid traverse in X 30 m/min Rapid traverse in Z 30 m/min Rapid traverse in Y 10 m/min Tool holder 1 Number of Tool stations: 12 Maximum speed: 6000 rpm Maximum power (100% duty cycle): 3.7 kW Maximum power (40% duty cycle): 5.5 kW Installation dimensions: approx. (width x depth x height): 4.33 x 2.15 x 2.24 m Weight: approx. 8000 kg Equipment: KITAGAWA BB210A821 + KITAGAWA SS1881K21 hollow clamping device for the main spindle Power clamping device for the work spindle as a replacement for the standard clamping device, consisting of: - Hydraulic three-jaw power chuck with through-hole, type "Kitagawa BB210A821", diameter 254 mm, through-hole 81 mm, max. speed: 4,500 rpm - Drawbar for a maximum bar diameter of 80 mm - Hydraulic Hollow clamping cylinder, type "Kitagawa SS1881K21", Through 81 mm - Anti-rotation device and clamping travel monitoring (GS) Clamping device KITAGAWA B208A521 + HOWA C1SB115M4774 Tailstock specification for counter spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right-hand discharge Hinged belt chip conveyor with rollers in the version on the right side of the machine with an approx. 1,000 mm discharge height, including adjustment control Double foot switch with protective cover for main and counter spindle Foot switch for chuck operation on the main and counter spindle in the version with two pedals instead of the standard version with one pedal Cgebvswfrklop E Abot Can be inspected under power and is immediately available. Machine has only been running on oil!

Year of construction: 2001, Condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor Csbvpok Hz Iwj E Abogt

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Cgsbvp E Aewc Nyxsbst Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D As New Condition

Condition: good (used), Good condition Cjbvovnmmuep E Abjgt Electronic unit Ready for delivery 4000 MM Steady rest

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale Cebvp E Ajv I Uavjbegt + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: excellent (used), Year of construction: 1990, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Z-axis: 1070 mm X-axis: 285 mm Cgjbewfrhwjvp E Abst Tailstock: -Quill diameter: 100 mm -Quill stroke: 100 mm EQUIPMENT/ACCESSORIES Hollow clamping cylinder -Tailstock including live center -Coolant system: 300 l, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: new, Year of construction: 2024, Functionality: fully functional, SIEMENS 840DE control system with 24" touch panel X = 275 mm, Z = 700 mm, Y = +50 / -40 mm Motor spindle up to 4,000 rpm with 65 mm through-bore 16-station BMT45 driven tools CNC tailstock Chip conveyor Cjbjudapijvp E Abogt Glass scale on the X-axis High-pressure pump 15 bar SCHUNK spindle package NCE 260-81 BMT45 tool holder package (rotating and fixed tools) Packaging Free truck loading with crane

Condition: good (used), Year of construction: 1972, machine/vehicle number: 4224-06, center height: 240 mm, space requirement width: 1,600 mm, space requirement length: 2,650 mm, space requirement height: 1,200 mm, turning diameter: 200 mm, VDF Gebr. Boehringer 42D (WAG 831) Drawbar Lathe Manufacturer: VDF Gebr. Boehringer Model: 42 D Year of manufacture: 1972 Machine No.: 4224-06 General information / technical specifications: Csbvp E Aewfqwdsbegt Used drawbar lathe from VDF Gebr. Boehringer Lathe chuck: Forkardt Ø250 mm wedge bars (power chuck) Center length / center width: 1000 mm Turning diameter: 200 mm (over support) Center height: 240 mm Spindle bore: approx. 62 mm Dimensions (h x w x d): 1200 mm x 1600 mm x 2650 mm Accessories: 2x Multifix brackets 2x clamping jaws Various turning tools Further information: Multifix Type B installed Including coolant device with tray

Condition: excellent (used), L & Z Lathe Center distance 1500 mm Center height 280 mm with digital display, with 2 axes 15 speeds from 24 - 2000 rpm Tool holder Parat WD 21/25 Transport dimensions: Length 2800 mm Cgobvjwc Nt Sop E Abet Width 900 mm Height 1700 mm

Condition: used, Year of construction: 1988, Functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, tool mount: 40 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Cgsbvpewfqvmj E Abot

Condition: good (used), Year of construction: 2007, operating hours: 45,711 h, Functionality: fully functional, machine/vehicle number: 210011, Used machine, all the time maintained by machine supplier. Still connected to electricity, pressure air, etc. Can be inspected anytime. Technical specification: Number of spindles: 6 Max. diameter of machined bar: 18 mm Bar feeder IEMCA SIR MS18 F – 3 m bars Axes: Cgebvjvrikqsp E Abet Tool carriers: - transverse shifts (positions 1.1; 2.2; 3.1; 3.2; 4.1; 4.2; 5.1; 5.2) - max. count: 8 - axes: X 35 mm, Z 85 mm, Y 20 mm Transverse unit (position 6.0) - max. count: 1 - axes: X 35 mm, Z 85 mm Longitudinal units (position 1.2; 2.1) - max. count: 2 - axis: Z 85 mm Rear unit and drilling units - max. count: 7 - driven tools: max. 4 Scara - Robot - X-Y-Z-NC (position 6.1; 6.2) - max. count: 2 - axes: Z 85 mm, X 503 mm, Y 180 mm - X-Z-NC (position 1.2; 2.1) - max. count: 2 - axes: Z 85 mm, X 14 mm