Condition: excellent (used), Year of construction: 1975, Machine type: Lead and spindle lathe Manufacturer: MATRA Model: D10 Year of manufacture: 1975 Condition: very good Type of offer: used machine Technical data Center height: 200 / 220 mm Center width: 1600 mm Spindle bore: 52 mm Speed range: 26 - 2000 rpm Cob E Uju Dktze Uunjgt Drive: 3.2 / 4.0 kW Remark: Forkardt 3-jaw wedge bar chuck Ø 200 mm with hard reversible jaws, additional 2 sets of base jaws with soft top jaws, Ideal quick-change holder with 5 inserts, coolant device, running center, drill chuck, keyless collet chuck with 26 collets Ø 2.0 - 31.0 mm, 20 square pliers 4.0 - 20 mm, 3 hexagon pliers 9-17-24 mm, running steady rest, spindle cone sleeve with tip, milling attachment for support, driver flange Ø 200 mm, various small parts, chip protection wall with chuck protection (not shown) Weight: 1500 kg The machine is in very good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min Cjb Esu Ix Dcs U Uunogt rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: excellent (used), Year of construction: 2012, INDEX MS16C Cgob E Uswglwne Uunot

Condition: ready for operation (used), Year of construction: 2007, operating hours: 30,692 h, Functionality: fully functional, machine/vehicle number: L2202520, turning length: 305 mm, turning diameter: 320 mm, bar diameter: 51 mm, TECHNICAL DETAILS Working area Max. cutting diameter: 320 mm Cgjb E U Uuewgltcenot Max. turning stroke: 510 mm Max. turned length: 305 mm Bar capacity: 51 mm Drive Motor power: 11 kW Control system Control system: Fanuc i-Series Turret Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg Rated power: 23.68 kVA

Condition: used, DHS 1-G / DHS1G, Feinmess Dresden GmbH Display Handling System SN:020702 Model: DHS1-G Cgsb E U Ueq S Tdgeunot Condition: Used

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, Functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Cgsb E U Uuet Akirsnjt Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MY Max. Machining diameter: 380 mm Max. Machining length: 538 mm Max. Milling speed: 4,500 rpm Cgjb Ejupth Re U Uunet Max. Spindle speed: 5,000 rpm Max. Bar diameter: 65 mm Machine is equipped with: - CNC CONTROL Mazatrol Matrix 2 - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm Cgjb Esvvrpko U Uunet longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, spindle motor power: 7,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, overall weight: 2,750 kg, The Mazak Quick Turn 10 with Fusion 640T control system has been overhauled in the workshop and is in very good condition. Cgob Eeu Auhas U Uunot

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, WFL M30 with Promot gantry loader large tool magazine for 90 tools Cgeb Estr Dtfs U Uunjt with turret and subspindle SIEMENS 840C Very good condition, was overhauled 10 years ago Price free loaded

Condition: used, 6230-9-260 / 6230 9 250 / 62309250, VT-80 / VT 80 / VT80, Physik Instrumente GmbH & Co. KG Linear table with stepper motor Cgsb E Ujq S T Ibe Uunet Model: 6230-9-260 Type: VT-80 Condition: Used

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 Cgsb E U Ujvzy Dtounjt (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: used, Year of construction: 2020, turning diameter 647.7 mm turning length 1117.6 mm control Haas weight of the machine ca. 11749 kg Csb E U Uujwgi A Uenegt

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 550 mm turning dia. over face-slide: 390 mm turning length: 513 mm max. turning diameter: 300 mm z-axis: 580 längs mm x-axis: 205 plan mm control: Fanuc 21i-TB spindle head: A2-6 workpiece spindle bore: max. Ø 65 mm spindle passage: Ø 76 mm revolution per minute: max. 4.500 U/min rapid power traverse in X-and Z direction: 24 / 30 mm/min tool turret - number of stations: 12 spindle hours: 20742 h operating hours - idle run: 63097 h tailstock taper ISO: Konus MT#4 tailstock quill stroke: 80 mm current type: 3~, 200/220V / 50/60 Hz total power requirement: ca. 23 (28,95 kVA) kW Weight approx.: 4,15 t dimension machine xH: Tiefe: 4,0 x 1,8 x 1,8 m dimensions L x W x H: Stangenlader: 2,0 x 0,9 x 1,3 m Further technical information: Tool turret with 12 positions, including 3 positions for driven tools (max. speed 5,000 rpm), largest tool Ø 40 mm Tailstock operation via foot switch Bar loader LNZ Quick Load Servo 65, with 600mm pull-off device, material Ø min./max.: 6.0/65mm; bar length min./max.: 350 / 1300mm movable hinged belt chip conveyor LNS Turbo, with coolant tank and pump hydraulic unit Equipment: -controlled parts catcher for workpieces Cebou Ix Ine E U Uunegt -machine lighting i.D. *

Condition: good (used), Year of construction: 1980, turning dia. 2500 mm, two vertical supports, one side Cgeb Eewgiwfo U Uunjt

Condition: used, Year of construction: 2004, Functionality: fully functional, CNC lathe Boley with control Siemens sinumberik 802C including all tools and bar feeder 3m bar diameters up to 20 mm Cgjb E Uswginks Uunet

Condition: used, Year of construction: 2019, TSUGAMI B0386E-III Swiss type lathe WORKING AREA Bar diameter Ø mm 8 – 38 Max part length mm 320 (Direct-driven rotating guide bushing) Max part length mm 70 (Without guide bushing) Max drilling diameter Ø mm 13 Max thread diameter M 12 Max chuck diameter for sub spindle Ø mm 38 Max drilling diameter for sub spindle Ø mm 12 Max thread diameter for sub spindle M 12 Max drilling diameter for driven tools Ø mm 10 Max thread diameter for driven tools M 8 Max diameter T-slot cutter (driven tool) Ø mm 45 CAPACITY Max spindle speed main spindle rpm 6000 Max spindle speed sub spindle rpm 7000 Max spindle speed rotating guide bushing rpm 6000 Max spindle speed tool spindle rpm 5000 Number of tool positions pcs 29 Ceb E U Usv Ipuzsunogt Tool size mm 16x16x125, 20x20x125 Rapid traverse speed m/min 32 (Z2, X2) 24 (X1, Y1, Z1, Y2) MOTORS Main spindle kW 11 / 7.5 Sub spindle kW 5.5 / 3.7 Driven tools kW 1.4 (1.0 for cross-drilling units front tool post) Y2 kW 0.5 X1, Y1, Z1, X2, Z2 kW 0.75 Coolant pump kW 0.4 Lubricating oil pump W 3 CONTROL SYSTEM FANUC 32i-B Controlled axes (including C-axes) pcs 8 X1, Z1, Y1, X2, Z2, Y2, C1, C2 LCD / MDI 10.4” color LCD OTHER Coolant tank L 190 Length x width x height mm 2240 x 1515 x 2050 Net weight kg 4950 Power requirement KVA 22.5 EQUIPMENT: Fanuc 32i-B control system with 8 controlled axes (X1, Z1, Y1, X2, Z2, Y2, C1, C2) Cross drilling unit with 4 spindles C-axis for main spindle and sub spindle Automatic programming software Abile Tool height compensation function Tool counter Screen for periodic maintenance Door lock Coolant level detector Spindle cooler Standard tools Retractable coolant nozzle Brake for the main spindle MACHINE PRICE: TSUGAMI B0386E-III (8 controlled axes) OPTIONS INCLUDED IN THE MACHINE PRICE: Tool set gauge O.D. Included Signal tower 3-step Included Work lighting LED Included Bar interface Included High-pressure pump (1.5 kW, 20 bar, 18 l/min) Included Rear drive unit (rear drive, 1.4 kW) Included Brake for sub spindle Included Direct-driven rotating guide bushing (Tsugami 2621-1234) Included Adapted for water-based cutting fluid (water type coolant specification) Included Oil blowing with M code (X-axis front 1, X-axis rear, Z2) Included Adapter for main spindle (Shaublin F37) and sub spindle (Shaublin F37) Automatic power off Included Air blowing for main spindle, sub spindle, and cross drilling unit 2 years Fanuc warranty (from shipment) Transformer, Operator manual, Compliance with European requirements including CE marking Drill set gauge I.D. (Long, Middle, Short) Detail ejector front with oil blowing (stroke 147, max work length 106 mm) Part conveyor with part separator (chute width 135, belt width 90) Rigid tapping also for rotating tools (cross drill, rear drive, back drive) 3 tool spindles for rear drive ER16, max 5000 rpm (tool spindle for rear drive) 4 tool spindles for back tool post (3282-Y041) 4 back adapters (dia 25 fixed tool) Guide bush adapter (Dunner CJ9) Guide-bushless kit incl stopper Chip conveyor (flat type) 10.4” color screen Included Minimum input increment (0.0005mm for X1 & X2, 0.001 mm for other axes) Included Linear interpolation Included Circular interpolation Included G04 Dwell (delay) 0-99999.99 Included Absolute/Incremental programming (X, Z, Y, C absolute / U, W, V and H incremental) Included Number of tool offsets: 99 Included Program memory: 64 kB (80 m perforation tape) Included Num...

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 4200 mm Measurements depth 2380 mm Cgjb E U Ujwdzchsunst Measurements height 2200 mm Machine weight 6750 kg Control Unit Brand FANUC Model Series 18i-T Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle bore 80 mm Tool taper 6 ASA Number of axis 4 Turret Number of turrets 2 Tools Number of index 12 Additional Equipment Bar feeder: Yes This 4-axis Biglia B56 S2M was manufactured in 1998. A robust horizontal turning machine featuring a FANUC Series 18i-T control, spindle bore of 80 mm, and a turning speed of 4000 rpm. It includes a bar feeder IEMCA Kid 80, enhancing productivity. If you are looking to get high-quality turning capabilities consider the Biglia B56 S2M machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm Cgob Eou Ix Aro U Uunjt centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 2300 kg Control Unit Cjb E Uswdy Tlo Uunegt Brand FANUC Model 31i B Main Drive Number of axis 5 This 5-axis Goodway SW-20 swiss type turning machine was manufactured in 2013. Ideal for precision and complex machining tasks, it offers advanced capabilities for intricate parts production. Consider the opportunity to buy this Goodway SW-20 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2001, Condition: ready for operation (used), General Data Machine weight 2500 Control Unit Brand INDEX Model C 200-4 Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 90 mm Z-Axis Movement 280 mm Cgjb E Uowdzamo Uunjt This Index ABC was manufactured in 2001. A reliable horizontal turning machine, it offers consistent performance for precision tasks. Consider the opportunity to buy this Index ABC horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2001, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840C Additional Equipment Equipment: Bar loader and several driven tools Cgob E U Uujwdy Uvjnjt This Index G200C horizontal turning machine was manufactured in 2001. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Index G200C horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2011, Condition: ready for operation (used), Control Unit Brand FANUC Model 32i-MODEL A Cjb E Uewdzbqe Uunsgt Main Drive Number of axis 3 Additional Equipment 12-Station Tool Turret (All Stations Driven) Hydraulic Tailstock Sandvik Capto C6 Tool Holder (4 pcs) Incl. SMW Autoblok Hydraulic Lathe Chuck 630 mm with Quick Jaw Change Incl. Hydraulic Steady Rest (Min. 110 mm Max. 530 mm) This 3-axis DOOSAN Puma 700 LM horizontal turning machine was manufactured in 2011. It offers robust performance for precision turning operations. Consider the opportunity to buy this DOOSAN Puma 700 LM horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 3153 mm Measurements depth 2500 mm Measurements height 1603 mm Ceb E U Uowdy Tfeunsgt Machine weight 5200 kg Control Unit Brand FANUC Model MSC-701 / MAPPS III Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5/5.5 kW Number of axis 5 This 5-axis MORI SEIKI NZ-S1500 was manufactured in 2009, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-S1500 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 5120 mm Measurements height 2320 mm Machine weight 8300 kg Control Unit Brand FANUC Model F31iA / MAPPS IV Main Drive Cgebjwdy S Ue E U Uunst Spindle speed range 6000 Spindle bore 73 mm Number of axis 5 Turret Number of turrets 2 Media Chip conveyor Yes Additional Equipment Hainbuch SPANNTOP nova standard chuck combi Axfix size 65 // Hainbuch SPANNTOP nova standard chuck combi Axzug size 65 Knoll compact filter; KF 110/500 Delivery pressure 70 bar, compact belt filter system for cleaning cooling lubricants with filter fleece 2x high-pressure pumps (main / counter spindle) 500 I coolant tank Float switch Pressure relief valve Vario SPB-H-15 7 pressure stages via M command // High pressure system included Transformer 95.00 kVA IEMCA bar loader; Master 80HF incl. accessories for bar processing up to 3.3 meters Bar diameter max. 80 mm This 5-axis MORI SEIKI NZX2000/800SY was manufactured in 2012, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures reliable performance and durability. Consider the opportunity to buy this MORI SEIKI NZX2000/800SY horizontal turning machine. Contact us for more information. Application Types Turning