Used Genius for sale (119)

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Isdpfx Aeu Ivw Teh Neal Can be inspected during production any time

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Iasdpfx Ahewg R Rts Njl

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Isdpfswg Sgcox Ah Neal

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Iaodpswg Sd Uofx Ah Nol Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, Year of construction: 2009, functionality: fully functional, Typ: SESOTEC Genius+ Iasdsq Suytjpfx Ah Nsl Tunnel size: 250x200mm Product dimensions: 200x160 (bxh in mm) Conveyor belt length: 1.500mm Conveyor belt width: 200mm Conveyor belt height: 800+/-100mm Basic sensitivity: FE: 1,2mm; NFE: 1,5mm; SUS: 2,0mm Year of manufacture: 2009 Conveyor belt: PU-belt Conveyor speed: ca 25m/min Drive: drum motor Supply voltage: 230V / 50Hz Reject: double blow nozzle Operating direction: in running direction right Accessoires: 1 set test pieces

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Iodpfsx Trm Aox Ah Njal Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Intermac Genius 37 CT-A half-size shape cutting table in excellent working condition. Year of construction is 2019. The machine features automatic tool change, foil cutting option, and double zero point for cutting laminated glass by rotating the glass sheet. The machine is immediately available from stock. Iedpfx Aex Uz Eweh Neal

Condition: good (used), Year of construction: 2005, operating hours: 527 h, functionality: fully functional, machine/vehicle number: 05-9473, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 60 mm, total height: 2,000 mm, total length: 1,600 mm, total width: 3,800 mm, rotational speed (max.): 12,000 rpm, input voltage: 400 V, The machine in question is a grinding and drilling center (manufacturer designation: stone cutting machine). The machine is designed as a vertical machining center in a gantry design. The frame consists of a welded steel tube construction. The drilling head is mounted vertically. There is no angular adjustment possible on any axis for the drilling head. Tools with horizontal shafts can be attached via an existing angle grinder attachment. The tool can be moved linearly along 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and does not move. The machine is used for: - Creating cutouts and round edge profiles - Making drip edges or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs The machine is also equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for clamping fixtures and for cleaning the drill spindle) - a water connection (for cooling tools and workpieces during machining) Machine Data: Manufacturer: Martin Kolb Maschinenbau - Model: Genius 2500 - Serial Number: 05-9473 Iodjw Upzfopfx Ah Noal - Year of Manufacture: 2005 - Max. working area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Main drive power: 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as milling cutters and other tool holders are also included.

Condition: used, • Model – Genius 37 CT-S • Year of manufacture – 2007, serial number: 86592 • Max. glass size: 3300 x 2550 mm • Glass thickness: 3 – 19 mm • Can also cut shapes, offcut optimization, data input at the cutting table • With breaking bars and strong air cushions • Table can also tilt • Working height: 900 mm Iodpjwz U Hbofx Ah Noal • Weight: 2600 kg

Condition: ready for operation (used), Year of construction: 1998, Homag Processing Center Genius BAZ20/30/14/D Electronically controlled milling and edge-banding machine, post-processing, and drilling center designed for batch production of furniture parts, solid wood, or similar materials. Base Machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Aggregate carrier with linear guide system, ball screw, and digital AC servo motor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the attachment of various table configurations Control System: Wood Wop 5.0 - Enlarged Z-axis travel, 500 mm - Extended safety step mat - Manual through-feed table B20/30+40/…/D - Motorized width adjustment of the longitudinal console D-table Iasdpfx Ahox Nrk Hj Nol - Chip conveyor belt for B../30+40/K - Stop pins for laminate overhang - Main spindle, 12 kW - Chain tool changer, 70 positions for B20, for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface 220/24 volt - Edge gluing aggregate, 4 sides for main spindle - Melting unit with granulate container - External automatic triple edge changer - Rack changer system for aggregates and tools - Rabbet pressure zone for main spindle - Flush trimming unit for tool changer - Saw and crosscut unit for tool changer - Boring/milling unit with 4 spindles for tool changer - Lock case milling unit for rotary magazine - Vertical milling unit with tracing ring - Sanding unit with air blast nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Location: Ex works, customer site - Immediately available - Machine must be dismantled by the buyer.

Condition: used, This listing is for a Kendall Genius 2 Checker/Calibrator The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker & calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F). Iajdsxzgvxopfx Ah Njl

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Iaedpfsx D Ebrex Ah Njl Adaptive cut ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2023, Opportunity to buy an outstanding fiber laser (Year 2023) with 6000x2000 mm working dimensions and 6000W laser output. Power on hours: 14500 Cutting hours: ca 4900 Can be inspected under power upon appointment. Availability: 03/2026 More detailed information on request. Ijdpfx Aexyxcujh Neal X: 6320 mm Y: 2,200 mm Z: 150 mm Fiber laser source: 6000W Axis speed: 130 m/min (trajectory 180 m/min)

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Iedpfxswv U N Ss Ah Noal Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: used, Year of construction: 2015, Second hand automatic shape glass cutting table (jumbo), Intermac Type Genius 61 CT, year 2015 Ijdsxpia Njpfx Ah Noal

Condition: used, Year of construction: 2002, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis Iajdovtfn Ijpfx Ah Nsl quill chuck: EROWA

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Iedpfx Ahsxdkxie Njal Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025!

Year of construction: 2009, operating hours: 40,500 h, condition: ready for operation (used), Movement X-Axis Movement 400 Y-Axis Movement 350 Z-Axis Movement 350 Iasdpfx Ajx D Hr Sjh Njl This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Iaodpfjqvnl Tjx Ah Njl

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Iedpfx Ahsw Ewpgo Noal Autom. ON/OFF with level alarm Oil temperature sensor Transport pipes Used machine in good condition

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, No reserve price - guaranteed sale at the highest bid! Isdpfx Ahev Iayzs Neal Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS X-axis: 400 mm Y-axis: 350 mm Z-axis: 350 mm Tool changer: 24-way electrode changer Year of manufacture of electrode changer: 2017 Cooling unit Manufacturer: RIEDEL Year of manufacture: 2016 Model: WKS 51.2-M5... Area of application: Air conditioning of the CNC die-sinking EDM system

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Iajdpewdwztsfx Ah Nel

Condition: new, power: 235 kW (319.51 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 5-005 /Available Immediately----IMMEDIATELY AVAILABLE AT A SPECIAL PRICE MAN TGM 18.320 4x4 BB WITH MEILLER-TRIGENIUS TIPPING BODY AND FASSI F135 AC0.24 (Alternatively, also available from stock with Palfinger 14.501) A vehicle suitable for gardening and landscaping, road construction, site transport, or municipal applications! FASSI F135AC.0.24 dynamic (4-section extension) * Max. outreach: 10.85 m * Slewing range: 390° * Support width: 4.37 m, hydraulic outriggers * All hydraulic cylinders double-acting * Piston rods chrome-hardened * Electronic overload cut-off device with FX500 emergency stop, including visual alarms (90% and 100%) * FASSI stability control FSC-M/1 incl. LMB II, pressure limiting and load holding valves * Control block with 4 control valves, operable from both sides * Control system for 2 additional functions with 2 hose guides, e.g. for grab operation * Fassi RCS remote control - 6 functions with 3 joysticks (2-2-2) * 1 LED work light mounted on the knuckle boom * Work light operable via RCH/display (1 b/w function) * Work light Or alternatively, the following loader crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID TRUCK-MOUNTED CRANE with KTL coating * Hydraulic four-section extension – 11.7 m Iedpexnn Ivsfx Ah Njal * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. emergency stop and load indicator * Operating hour counter with service interval display * Scanreco radio remote control * LOAD INDICATION and overload display PALTRONIC at remote control unit * 5 selectable speeds Vehicle: * MAN TGM 18.320 4X4 BB truck-mounted crane tipper * Tipping body 4200x2420 mm, manufacturer MEILLER type TRIGENIUS (new series) * Front wall height 800 mm * Side wall height 600 mm * Fully retractable lashing eyes in the platform floor * Driver’s cab CC: the compact version (narrow, short, standard height) * Wheelbase 3,875 mm * Suspension leaf/leaf (also available as leaf/air at extra cost) * Drive 4x2 * Tires FA 2x 295/80R22.5 RA 4x 295/80R22.5 * Total weight 18,000 kg * MAN TipMatic automatic transmission * MAN D0836 LFLAP diesel engine, 235 kW (320 hp) output, 1,250 Nm torque, Euro 6e * Transmission functionality: EfficientRoll * Cruise control * Differential lock on rear axle * MEILLER axial pump 270/45 * Operation for tipper body inside the cab * MAN EasyControl panel, 4 functions, operable from outside with door open * Trailer coupling RINGFEDER type 4040/G150B * Brake connection 2-line at end of frame * Sun visor in front of windshield * Central locking with remote control * MAN media system Navigation Advanced 7 inch * Online Traffic for navigation function * Smartphone integration * Heated and electrically adjustable rear and wide-angle mirrors * Air-suspended comfort driver’s seat with lumbar support, shoulder adjustment, and heating * Height-adjustable seat belt on driver’s seat * 2 work lights on cab roof * 2 halogen rotating beacons on cab roof * And much more. Financing, leasing or hire purchase available. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, mileage: 48,847 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2024, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Sleeper Cab * Front chassis design: robust * Mechanical cab suspension * Exterior sun visor * Flexible cab step * Horns, 1 set * LED headlights and fog lights * Two LED headlights for the rear cab wall * Rotating beacons on the front cab, prepared * Handle and surround: black, side panels: cab color * Windshield with sun protection film * Rear window: double-glazed * DAF Corner View * Central locking, 3 keys, 2 remote controls * Leather steering wheel * Interior trim color: Luxury * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with fabric upholstery * Dashboard table * Center storage compartment * Cooler or refrigerator * Curtains (without divider) * LED interior lighting * Automatic cab climate control * Auxiliary heating with waste heat pump and timer * Driver's side roller blind * Electric roof hatch * FMS connector, extended and prepared * DAF Connect * Toll preparation * Digital tachograph, VDO 1C, version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-prepared, radio, 2x mobile antennas GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane Departure Warning System * Electronic Stability Control (VSC) * Reverse Alarm * Front: 8.00 t, parabolic, 167 N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t/Brakes 21.0 t * Rear axle load capacity 10.50 t + 10.50 t * Rear: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, load index 148 * Front leaf spring suspension, extra high * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Silver-gray steel disc wheels * Silver-gray wheel trim rings * MX-13 engine, 390 kW/530 hp Cab emblem: 530 * Euro 6 emissions class * ECO performance * Automatic idle shutoff, 5 minutes Iajdpsqc Rikofx Ah Nel * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Maneuvering mode * Automatic transmission with manual transmission, full version * Off-road use with rocking function * Rear axle ratio 3.61 * Mechanical differential lock * Traction control (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring-loaded brake cylinder, first front axle * Spring-loaded cylinder on tandem rear axles 1 and 2 * Parking brake assist * 2-cylinder compressor without clutch * Driven rear axle with drum brakes * Wheelbase 4.05 m/rear overhang 1.50 m tipper * Longitudinal member 310/7.0 mm, with internal adjustment front/rear * EAS unit right, vertical rear + 45 l exhaust tank left * Steel compressed air tank * 340 l aluminum fuel tank left, height 505 mm * Fuel tank left * Splash guard * Use with drawbar, type plate, up to max. GVW * Cross member D200 + Ringfeder coupling D200 * Pneumatic connection for trailer, swivel coupling * Trailer electrical connection 24V/15-pin Cable: 15-pin + EBS * CAN J1939 functions in the body connector * Air control preparation for tipper use * Side marker lights * First transmission PTO NH/4c-R-27/30 * 110 A generator, 2 x 230 Ah batteries * Heated fuel pre-filter * Dust shield * Powertrain Plus Warranty - 3 years - 200,000 km * Technical inspection before delivery BODY - MEILLER TRIGENIUS D316 - 200 mm higher, welded bulkhead with deflector adapted to the space available - Bordmatic left (1 Bordmatic cylinder) - Swinging right side panel with manually operated claw lock - Swinging

Condition: used, mileage: 48,847 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2024, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Sleeper Cab * Front chassis design: robust * Mechanical cab suspension Iaodoqgaizopfx Ah Nsl * Exterior sun visor * Flexible cab step * Horns, 1 set * LED headlights and fog lights * Two LED headlights for the rear cab wall * Rotating beacons on the front cab, prepared * Handle and surround: black, side panels: cab color * Windshield with sun protection film * Rear window: double-glazed * DAF Corner View * Central locking, 3 keys, 2 remote controls * Leather steering wheel * Interior trim color: Luxury * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with fabric upholstery * Dashboard table * Center storage compartment * Cooler or refrigerator * Curtains (without divider) * LED interior lighting * Automatic cab climate control * Auxiliary heating with waste heat pump and timer * Driver's side roller blind * Electric roof hatch * FMS connector, extended and prepared * DAF Connect * Toll preparation * Digital tachograph, VDO 1C, version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-prepared, radio, 2x mobile antennas GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane Departure Warning System * Electronic Stability Control (VSC) * Reverse Alarm * Front: 8.00 t, parabolic, 167 N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t/Brakes 21.0 t * Rear axle load capacity 10.50 t + 10.50 t * Rear: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, load index 148 * Front leaf spring suspension, extra high * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Silver-gray steel disc wheels * Silver-gray wheel trim rings * MX-13 engine, 390 kW/530 hp Cab emblem: 530 * Euro 6 emissions class * ECO performance * Automatic idle shutoff, 5 minutes * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Maneuvering mode * Automatic transmission with manual transmission, full version * Off-road use with rocking function * Rear axle ratio 3.61 * Mechanical differential lock * Traction control (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring-loaded brake cylinder, first front axle * Spring-loaded cylinder on tandem rear axles 1 and 2 * Parking brake assist * 2-cylinder compressor without clutch * Driven rear axle with drum brakes * Wheelbase 4.05 m/rear overhang 1.50 m tipper * Longitudinal member 310/7.0 mm, with internal adjustment front/rear * EAS unit right, vertical rear + 45 l exhaust tank left * Steel compressed air tank * 340 l aluminum fuel tank left, height 505 mm * Fuel tank left * Splash guard * Use with drawbar, type plate, up to max. GVW * Cross member D200 + Ringfeder coupling D200 * Pneumatic connection for trailer, swivel coupling * Trailer electrical connection 24V/15-pin Cable: 15-pin + EBS * CAN J1939 functions in the body connector * Air control preparation for tipper use * Side marker lights * First transmission PTO NH/4c-R-27/30 * 110 A generator, 2 x 230 Ah batteries * Heated fuel pre-filter * Dust shield * Powertrain Plus Warranty - 3 years - 200,000 km * Technical inspection before delivery BODY - MEILLER TRIGENIUS D316 - 200 mm higher, welded bulkhead with deflector adapted to the space available - Bordmatic left (1 Bordmatic cylinder) - Swinging right side panel with manually operated claw lock - Swinging