Year of construction: 2000, condition: ready for operation (used), number of axes: 2, This Parpas RUAP 700 was manufactured in 2000. A used cylindrical grinding machine, fully reconditioned and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of Ø 360 mm. If you are looking to get high-quality grinding capabilities, consider the Parpas RUAP 700 machine we have for sale. Contact us for more information. • Status: Excellent • Control: Siemens Sinumerik 840C • Distance between centers: 700 mm • Center height: 185 mm • Maximum workpiece diameter: 360 mm • Maximum table travel (Z-axis): 820 mm • Table feed speed (Z-axis): 0–10 m/min • Maximum wheelhead travel (X-axis): 500 mm • Wheelhead feed speed (X-axis): 0–10 m/min • Max wheel size (left): 508 x 203 x 76 mm • Max facing wheel size (right): 450 x 127 x 50 mm • Wheel motor power: 10 hp Hfedoygmg Nepfx Ahvod • Workpiece spindle speed: 0–600 rpm • Wheel spindle speed: 0–2,880 rpm • Workpiece spindle taper: ISO 50 • Tailstock internal taper: Morse 4

Condition: ready for operation (used), Year of construction: 2006, working width: 1,100 mm, overall weight: 2,460 kg, This CB Levigatrici belt sander was manufactured in 2006. It features a maximum working width of 1100 mm, operates on 400 V / 50 Hz, and has a total power of 48 kW. Weighing 2460 kg, it's a robust choice for your sanding needs. Consider the opportunity to buy this CB Levigatrici belt sander. Contact us for more information about this machine. • Grinding units: 3 • Electrical: 400 V / 50 Hz • Total power: 48 kW Hodpfxoygwuqj Ahvjfd • Rated current: 94 A • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding.

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: Hjdpjyiz R Uofx Ahvefd • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Year of construction: 1995, condition: ready for operation (used), overall weight: 6,000 kg, product length (max.): 3,600 mm, This KELLENBERGER Kel-Varia cylindrical grinding machine was manufactured in 1995. It features a Kellenberger Kelco 90 control system and a robust internal grinding device with a B-axis for a tiltable grinding head. The machine supports a tip height of 175 mm and a tip width of 1,000 mm, equipped with a belt filter system. Ideal for precision grinding tasks. Contact us for more information about this machine. • Capacity: Center height 175 mm; between centers 1000 mm • Configuration: Internal grinding device; B-axis tiltable grinding headGrinding head and B-axis • Grinding heads available: R, RS, UR • R head pivot: +30° • RS/UR heads, rotating part indexing: • Manual indexing: 180° to -190°, 2.5° steps • Automatic indexing: 180° to -90° (or -30°), 2.5° steps • B-axis (RS/UR heads): pivot +180° to -190° (some variants limited to about +30°); resolution 0.1"Workhead • Standard workhead (C-axis): pivot -30° to +120° • Spindle speed: up to 600 rpm (stepless) • Mounting taper: MK5; reduction sleeve MK5/MK4 • Adapter flange: MK5 / DIN 55027 size 5 • Torque capacity: 160 Nm • Max workpiece between centers: 150 kg • Workhead with rotating spindle: • C-axis pivot: -30° to +120° • Spindle speed: 5–500 rpm (stepless) • Mounting taper: MK5 • Torque capacity: 320 Nm (incl. clamping device) • Max workpiece between centers: 220 kgTailstock • Taper: MK4 • Quill stroke: 50 mm • Micro-adjust (option): ±150 µm (±0.006 in)Grinding wheels and internal grinding • UR head: • Left wheel max: 400 × 63 mm • Right wheel max (option): 400 × 50 mm • Max peripheral speed: 32 m/s • R head: • Wheel max: 500 × 100 mm • Max peripheral speed: 32 m/s with 7.5 kW motor; 45 m/s with 9.2 kW motor • RS head: • Wheel max: 500 × 80 mm • Max peripheral speed: 32 m/s with 7.5 kW motor; 45 m/s with 9.2 kW motor • Internal grinding (option/device on this machine): • Mounting bore for high-performance spindles (HJN): 80 mm • Mounting bore for high-frequency spindles (MFV): 120 mmAxes and tables • Z-axis (lower table): • Max speed: 15 m/min • Resolution: 0.1 µm • Travel (1000 mm between centers version): 1150 mm • Upper table swivel range (1000 mm between centers): 0 to +9° • X-axis (grinding slide): • Max travel: 320 mm • Max speed: 7.5 m/min • Resolution: 0.1 µmDrive motors • X-axis slide: 0.94 kW (2000 min⁻¹) • Z-axis table: 0.94 kW (2000 min⁻¹) • Indexing / B-axis: 0.63 kW (3000 min⁻¹) • Grinding spindle UR: 4.4 kW @ 50 Hz (3000 min⁻¹) / 5.2 kW @ 60 Hz (3600 min⁻¹) • Grinding spindle R/RS (7.5 kW version): 7.5 kW @ 50 Hz (1500 min⁻¹) / 9 kW @ 60 Hz (1800 min⁻¹) • Grinding spindle R/RS (9.2 kW version): 9.2 kW @ 50 Hz (1500 min⁻¹) / 11 kW @ 60 Hz (1800 min⁻¹) • Workhead (standard & rotating): 3.1 kW (3000 min⁻¹) Hfedpfxoybb T Ts Ahvsd • Hydraulic pump: 0.37/0.44 kW (1500/1800 min⁻¹) • Hydrostatic pump: 0.37/0.44 kW (1500/1800 min⁻¹)Dimensions, weight, utilities (1000 mm between centers version) • Floor space (L × W): 3600 × 2000 mm • Weight: net 5000 kg; gross 6000 kg • Minimum air pressure: 4 bar • Noise emission: 70 dB(A) Additional equipment • Belt filter coolant system

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 29,000 kg, number of axes: 4, This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine. • Center height over floor: 1,604 mm • Center height: 525 mm • Max grinding length: 3,000 mm • Max grinding diameter: 850 mm • Max workpiece weight (between centers): 5,000 kg Hsdpfjycuiwex Ahvsfd • Total machine weight: 29,000 kgX-axis (transversal carriage) • Effective travel: 650 mm • Max programmable speed: 6,000 mm/min • Min programmable speed: 0.01 mm/min • Min programmable increment (in diameter): 0.001 mm • Motor torque: 22 N·mZ-axis (longitudinal carriage) • Max programmable speed: 6,000 mm/min • Min programmable speed: 0.01 mm/min • Min programmable increment: 0.001 mm • Motor torque: 42 N·mB8 wheelhead • Swivel angle: -30° to +180° • Wheel dimensions: Ø760 x 80(100) x Ø304.8 mm • Cutting speed: 45 m/s • Power: 22 kWWorkhead • Spindle speed range: 10–120 rpm • Center cone: Morse 6 • Motor torque: 42 N·mHydraulic tailstock • Max taper correction: ±0.20 mm • Max center travel: 100 mm • Center cone: ASA 4Dresser • Location: Positioned on workhead and tailstock

Year of construction: 2008, condition: ready for operation (used), travel distance X-axis: 450 mm, travel distance Z-axis: 850 mm, overall weight: 12,000 kg, This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. • Center distance: Small (2 cross slides) 400 mm; Long (2 cross slides) 800 mm; Long (3 cross slides) 800 mm • Swing diameter: 180 mm • Max. workpiece weight: 20 kg • X-axis (cross slide) • Speed: 0.001–1,500 mm/min • Resolution: 0.00001 mm • Z-axis (longitudinal slide) • Max. travel: 850 / 1,600 mm • Speed: 0.001–25,000 mm/min • Resolution: 0.00001 mm • Turning turret • 8-station: Capto 6 fixed • 12-station: VDI 40 fixed • 8-station: VDI 30 driven fixed • Max. drive speed: 4,000 rpm • Drive power: 2.5 kW • Option: Active longitudinal measuring rod on turret (Capto or VDI) • Grinding spindle head • Mounting angle: -25° / +25° • Grinding speed: 50 m/s • Wheel size: Ø 400 x 50 (63) x 127 mm • Internal grinding attachment • Spindle positions on swiveling plate: 3 • Spindle position: 0° / +45° • Automatic positioning in 3 positions • Internal grinding spindle range: 1,200–120,000 rpm • Available spindle speeds: 24,000–120,000 rpm Hsdpfx Aox D Iwvjhvsfd • Workpiece spindle head (fixed) • Speed range: 1–7,500 min⁻¹ • Drive power: 10.5 kW • Tool holder: MK4 / DIN 55026 A4 • Load during surface grinding: 500 Nm • Roundness accuracy: 0.0004 mm • Workpiece spindle stock (swivelable) • Swivel range: 0–10° • Resolution: 0.0001° • Speed range: 1–4,000 min⁻¹ • Drive power: 10.5 kW • Tool holder: MKS / DIN 55026 A6 • Load during surface grinding: 500 Nm • Roundness accuracy: 0.0004 mm • W-axis / Tailstock • Max. travel: 450 / 1,650 mm • Speed: 0.001–1,500 mm/min • Fine adjustment for cylindricity corrections: ±0.01 mm • Option: Quill recoil ±0.40 mm • Quill diameter: 60 mm • Mounting taper: MK4 • Quill travel: 45 mm • Optional synchronous tailstock: 1–7,500 rpm; drive power 10.5 kW; mounting taper MK4 / DIN 55026 A4 • Dressing • Standing dressing tool, holder with MK1 mount • Single-point diamond / shortened tile • Dressing spindle with axial drive on swivel holder: Ø 58 / 89 / 100 mm max • Dressing spindle with axial drive at the rear: Ø 100 mm max • Connection values • Total connected load: 45 kVA • Minimum air pressure: 5.5 bar • Total weight: 7,600 / 12,000 kg • Condition and service • Still powered up and fully functional • No roughing work • Annual maintenance by Studer Additional equipment • Shaft automation (included in scope of delivery) • Grinding wheels (included)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min Hedpfsyli H Aox Ahvjfd • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits Hodpfx Ahjyaqg Tovofd • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,551 h, total width: 1,790 mm, total height: 2,150 mm, overall weight: 2,300 kg, product length (max.): 1,690 mm, This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine. Additional equipment • Steel roller • Rubber roller with a device for a needle roller (unused) • Belt release Machine Benefits Technical Machine Benefits • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity unspecified) • V-belts • Various small parts Hfjdpfxox D E I Ee Ahvjd • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required slow-blow fuse minimum RP/RE: 40 A • Required slow-blow fuse minimum RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Cable cross-section correct dimensioning RP/RE: 5x6 mm² • Cable cross-section correct dimensioning RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt blow-off diameter RE-L: 150 mm • Required total extraction connection diameter RP/RE: 200 mm • Required total extraction connection diameter RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for dust extraction RE-L: 5400 m³/h • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece passage height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3–15 m/min • Total machine length RP/RE: 1690 mm • Total machine length RE-L: 1850 mm • Total machine width RP/RE: 1790 mm • Machine height including base and extraction outlet RP/RE: 1950 mm • Maximum machine height including base and extraction outlet RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Extra Information Machine still under power

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with SIMODRIVE 611D, overall weight: 6,200 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details. • Current defects: • Measuring probe is defective • Switch in the coolant reservoir for controlling the pump is defective • Axis configuration: 2-axis (X, Z) • Center distance: 1000 mm Hodeymn Ihepfx Ahvefd • Center height: 180 mm • Max. swing diameter: 355 mm • Max. workpiece weight: 150 kg between centers; 60 kg in chuck (including clamping device) • X-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–8,000 mm/min • Measuring system: glass scale, 0.0005 mm resolution • Z-axis: • Drive: electromechanical with ball screw • Feed rate: 0.01–12,000 mm/min • Measuring system: rotary encoder, 0.001 mm resolution • Workpiece spindle: • Motor power: 2.0 kW • Speed: 0–1000 rpm • Taper: MK5 and KK5 (DIN 55026) • Grinding spindle: • Motor power: 9 kW • Speed: 1400 rpm • Grinding wheel size (standard): 500 × 80 × 203.2 mm • Bearings: precision rolling bearings • Lubrication: lifetime lubrication • Required space: approx. 3900 × 2450 × 1800 mm • Power supply: 400 V, 50 Hz, 3-phase • Control voltage: 230/24 V • Installed power: approx. 23 kW

Condition: ready for operation (used), Year of construction: 1989, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Additional equipment • Optional: Additional equipment available Hjdsx Enapjpfx Ahvjfd Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production • Refurbished by uhlman werkzeugmaschinen-service in 2021/22

Year of construction: 2021, operating hours: 3,008 h, condition: ready for operation (used), travel distance X-axis: 260 mm, travel distance Z-axis: 1,115 mm, overall weight: 6,500 kg, total height: 1,900 mm, product length (max.): 4,400 mm, This 3-axis QGrind QGRIND U1000 cylindrical grinding machine was manufactured in 2021. It features a max workpiece diameter of 450 mm, a distance between centers of 1000 mm, and a grinding length of 800 mm. Equipped with a Fanuc 0i-TF control unit and a 15" touchscreen, it offers precise control and ease of use. Consider the opportunity to buy this QGrind QGRIND U1000 cylindrical grinding machine. Contact us for more information. • Max X-axis speed: 6 m/min • Max Z-axis speed: 10 m/min • Min incremental movement X/Z: 0.001 mm • Encoder resolution X/Z: 0.0001 mm • X-axis linear scale: Heidenhain • Z-axis guide type: V + scraped flat • X-axis guide type: Linear • B-axis servo controlled: Yes • Max workpiece diameter: 450 mm • Distance between centers: 1000 mm • Max grinding length between centers: 800 mm • Max workpiece weight between centers: 150 kg • Workpiece spindle taper: MT5 • Table tilt: 2° clockwise / 7.5° counterclockwise • Wheel peripheral speed: 35–45 m/s • Left wheel dimensions: Ø455 × 50 × Ø127 mm Hedpfx Asx D Dvuohvefd • Right wheel dimensions: Ø355 × 38 × Ø127 mm • Tailstock taper: MT5 • Tailstock quill travel: 50 mm • Tailstock actuation: Hydraulic • Grinding wheel motor power: 4.5 kW • Workhead speed: 5–400 RPM • Wheel orientation range: 35–190° • Max spindle speed for internal grinding: 30000 RPM Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Hfsdex D Eyhepfx Ahvsd • Contact roller unit • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation • Vacuum table with blower integrated in the machine stand • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm • Sanding length: 1900 mm

Year of construction: 2018, condition: ready for operation (used), spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis Willi Göbel GRS-III-2400-SP cylindrical grinding machine was manufactured in 2018. It offers precision and efficiency for your grinding needs. If you are looking to get high-quality grinding capabilities, consider the Willi Göbel GRS-III-2400-SP machine we have for sale. Contact us for more information. Hsdpex D Sbrefx Ahvofd Additional equipment • Compliance with German and European regulations, including: Directive 98/37/EC (Machinery Directive) / Low Voltage Directive 73/23/EEC / Equipment and Product Safety Act (GPSG) /Prevention Principles (BGV A1) • CE marking and written confirmation of compliance provided Machine Benefits Technical Machine Benefits • Tool spindle: diameter range: 170 - 220 mm / grinding wheel width: 3 - 5 mm (base body 20 mm) / bore diameter: 52 mm / maximum weight: 6 kg • Small workpiece spindle: speed range: 200 - 23000 rpm/ power: ~30 kw/ maximum torque: 20 nm /diameter range: 10 - 400 mm /maximum width: 100 mm • Large workpiece spindle: speed range: 0 - 6000 rpm/ power: ~41 kw /maximum torque: 800 nm (with a maximum workpiece weight of 250 kg)/ diameter range: 390 - 700 mm/ maximum width: 400 mm • Test piece unit: speed range: 0 - 1000 rpm / maximum test piece diameter: 100 mm / maximum test piece width: 300 mm / maximum profile height: 35 mm • Grinding strategies : classical pendulum cycle (two-sided feed) / one-sided feed (lifting at one end) / contour grinding with all three grinding wheels (user-selectable) / re-grinding cycle for flat surfaces with oscillating feed • Optical system : optical system equipped with 33x magnification, resistant to coolant / three cameras installed on the grinding spindles • Integrated balancing system capable of generating reports on unbalance before and after balancing / ae system (e. G. , mpm) on the grinding wheel side to monitor the grinding process • Emergency stop button near the spindle stock / second safety door without a window • Ethernet interface / usb interface / human-machine interface (hmi) with a touch panel or op15 for system status display, machine configuration, and manual data input

Condition: ready for operation (used), Year of construction: 2018, This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Machine Benefits Technical Machine Benefits • Working width: 1100 mm • Min. /max. Working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4. 5 / 9 m/min • Main motor 15 kw (20 hp) Extra Information ontrol Unit Electronic ammeter for the main motor to display current consumption Electronic display of the working height Electronically controlled sanding belt Hfedpfxsx Nr Sdj Ahved Electronic working height adjustment Electronic Programming Unit LOGIC 50 K Electronic Programming Unit LOGIC SC with LCD display with two rows of dust-proof polishing keypads and integrated LED signals Workpiece Rubber pressure rollers Kickback protection at the inlet Rubber feed carpet Roller table with two rollers at the inlet and outlet of the work table Pneumatic on/off switching of the roller - 1st unit Pneumatic on/off switching of the roller - 2nd unit TES elastic link sanding pad Pneumatic on/off switching of the sanding pad unit Tools "R" unit with roller "CS" combination unit with roller/sanding pad Rubber-coated calibration roller Rubber-coated sanding roller Hard sanding pad "RA" diagonally ribbed steel contact roller in the first unit

Year of construction: 1997, condition: ready for operation (used), number of axes: 4, This 4-axis KELLENBERGER Kel-Varia UR 175/1000 was manufactured in 1997. It features an internal grinding device with a tiltable B-axis and a C-axis for out-of-round grinding, complemented by a belt filter system. Consider the opportunity to buy this KELLENBERGER Kel-Varia UR 175/1000 cylindrical grinding machine. Contact us for more information. Additional equipment • Belt filter system Machine Benefits Technical Machine Benefits • Internal grinding device with b-axis for tiltable grinding head and c-axis for out-of-round grinding Extra Information Hjdpfxox T Dg Ie Ahvsfd Center height x center distance: 175 x 1,000 mm Complete with standard accessories, electrical equipment For three-phase current 3 x 400 volts, 50 Hz. Machine color: DARK GRAY NCS 7502B combined with BLUE NCS KEL-ASSIST 90 PLUS software package Internal grinding attachment with 80 mm diameter chuck Right-hand grinding wheel attachment, 400 x 50 mm diameter Oil mist lubrication device for HJN spindles Micro-adjustment on the tailstock Face-spiral three-jaw chuck, 160 mm diameter Dressing device on the upper table Pivoting diamond holder 9.5 mm MOVOMATIC lead-in sensor Set of vibration-damping pads Set of lubricant for initial filling CNC-controlled C-axis

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 320 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit. Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance between centres: 1000 mm Hjdpfx Ahoyi Eliovofd • Centre height: 175 mm • Grinding wheel dimensions right Ø 400 x 50 mm • Grinding wheel head movements -210°/+30° • Rotational speed 8-800 rpm • Spindle type cm5

Year of construction: 2002, condition: ready for operation (used), overall weight: 5,000 kg, total height: 2,050 mm, This JUNKER EJ29 CNC was manufactured in 2002. It features a FANUC 21i-TB CNC control, servo drives for spindle and table axes, and a hydraulic/manual tailstock. The machine can handle workpieces up to 280 mm in diameter and 800 mm in length, with a grinding wheel diameter of 400 mm. Consider the opportunity to buy this JUNKER EJ29 CNC cylindrical grinding machine. Contact us for more information. • Distance between centers / workable length: approx. 800 mm Hfsdpjyq E Srefx Ahved • Center height: approx. 180 mm • Maximum workpiece diameter: up to approx. 280 mm • Grinding wheel diameter: around 400 mm (typical for European versions) • Grinding wheel peripheral speed: approx. 45 m/s • Grinding wheel motor power: 4.5 kW • Construction/features: Servo drives (spindle and table axes), auxiliary spindle support, hydraulic/manual tailstock Additional equipment • 4 wheel hubs • 1 hydraulic CM5 workholding spindle • 3-micron cartridge filtration system Dimensions Machine Depth 3340 mm

Year of construction: 2022, condition: ready for operation (used), number of axes: 2, Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details. • Max. Grinding diameter: 200mm • Max. Grinding length: 800m • Total equipment capacity: 7 kVA • Voltage: 400 V • Phase: 3 PH • Frequency: 50 Hz • Protection class: IP54 • Total current: 25 A • Bed guide Hedpoym Ar Uefx Ahvjfd • Headstock spindle • Internal grinding tool • Transverse and longitudinal screw bearings • Tailstock sleeve • Transverse feed guide • Grinding wheel spindle (dynamic and static pressure) • Grinding wheel spindle (tiles)

Year of construction: 2023, operating hours: 4,976 h, condition: ready for operation (used), General Data Measurements width 3250 mm Measurements depth 2100 mm Measurements height 2150 mm Control Unit Brand FANUC Model 31i-B Main Drive Hsdpfx Ahex D Nfnsvofd Number of axis 4 Movement X-Axis Movement 370 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 150 kg Additional Equipment Equipped with: Measuring probe, Kraft & Bauer fire extinguisher installation, LTA oil mist separator, DGS paper filter, motorex/Ritter & bader coolers, grinding wheels, documentation This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2023. It features a distance between centers of 650 mm, center height of 175 mm, and can handle a maximum workpiece weight of 150 kg. Equipped with a Fanuc 31i-B control system, it also includes a measuring probe, fire extinguishing system, oil mist separator, and coolers. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. Application Types Grinding

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 11000 kg This 3-axis JUNKER QUICKPOINT 5002/10 was manufactured in 2002. It features a Siemens control system, Marposs measuring, and CNC-controlled Z-axis and grinding spindle head. With a grinding length of 1000 mm and a diameter up to 280 mm, it's ideal for precision surface grinding. Consider the opportunity to buy this JUNKER QUICKPOINT 5002/10 surface grinding machine. Contact us for more information about this machine. Application Types Grinding Hfjdpfsx D Inusx Ahvod

Year of construction: 1992, condition: ready for operation (used), - USED - BRIDGE-TYPE CNC GRINDING MACHINE LONGITUDINAL TRAVEL: 650 mm TRANSVERSAL TRAVEL: 450 mm VERTICAL TRAVEL: 500 mm VERTICAL SPINDLE TRAVEL: 130 mm TABLE SIZE: 770 x 630 mm MAX ADMITTED LOAD: 500 Kg DISTANCE BETWEEN THE COLUMNS: 750 mm Hodpfx Aheyru Nisvjfd DISTANCE BETWEEN SPINDLE AXIS-TABLE: 0-600 mm SPINDLE: 30.000 rpm CONTROL UNIT: FANUC 210 IS-M WEIGHT: 4000 Kg OVERALL DIMENSIONS: 2650 x 2000 x 3150 mm ACCESSORIES: RS 232 SERIAL PORT NOTE: MACHINE WITH SPINDLE 60/70.000rpm, SPINDLE 100/120.000rpm; MACHINE COMPLETELY OVERHAULED IN 2002

Condition: ready for operation (used), A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment. Hedpjyuglujfx Ahvjfd

Condition: ready for operation (used), total width: 3,500 mm, total length: 6,000 mm, total height: 2,500 mm, controller manufacturer: CNC 6 axes, empty load weight: 6,000 kg, additional equipment features: +, min/max drilling Ø: 6- 120 mm Table movement: 5 -- 500 mm Max grinding depth: 100 mm Swing 280 mm Hedpfxjyru H Io Ahvsfd 6 -120 mm grind depth 100 mm angular adjustment 30° As good as new! EXTERNAL GRINDING: * Max dia of the workpiece: 280 mm Center height: 620 mm Table travel (X-axis): 220 mm Support travel (Y-axis): 380 mm Number of rotations grindingwheel: 0-15 m/min Travelspeed: 0.01 - 10 m/min INTERNAL GRINDING: * Clamp opening grindingspindle: 120-170 mm Max length: 200-250 mm Saddle travel: mm coolant pump: 292 L/1 bar

Condition: ready for operation (used), Cincinnati Grinder Ø 310 x 1250 mm Center distance: 1250 mm Max dia of the workpiece: Ø 310 mm Hodpfxjyru E Ro Ahvofd