Used Spring End Grinding Machine for sale (107,708)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Make: WAFIOS Crodpfx Abowi Szrjuoh Type: FEL3 Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm legth of springs: 10 - 240 mm Location: In our warehouse

Condition: new, Year of construction: 2025, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Crodpjid Iymofx Abueh Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: as good as new (ex-display), Year of construction: 2021, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... NEVER USED - complete metal forming / processing plant (about 80 machines) Crjdpfx Abovlimlsuoh Please contact us for full machinery list and more photos. Thank you!

Condition: used, Tool grinding machine, grinding machine, angle grinder, turning steel grinding machine, steel grinding machine -Elysier grinding possible with the machine Cedpfx Aedz U Tljbuorh -Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: +15° bis -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Sanding dust extraction -Max. Steels cross section: mm -Number: 1x grinding machines available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Year of construction: 1960, condition: not inspected (used), Tungsten carbide chip flute grinding machine of the company Wendt type SS 50 Crodehaqxbopfx Abujh

Condition: used, Year of construction: 1990, CYLINDRICAL GRINDING MACHINE GENDRON 500x2000 Crsdpfxevv Sdze Abush

Condition: used, Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinding machine, angle grinder, lathe steel grinder -Clamping table: 440 x 300 mm -Max. Intermediate dimension: 130 mm -Grinding wheels diameter: 125 mm -Dimensions: 1200/840/H1680 mm Cedocvnaijpfx Abuorh -Weight: 380 kg

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Crodpou Hzg Refx Abujh Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS Codpjirfpgjfx Abusrh AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Crsdpfexiv Ugox Abujh Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Crodpevripmefx Abush

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available Crodotr Azkspfx Abueh The roundness within 0.001

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. Crjdeq Nf Uwjpfx Abueh When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Credor Izikjpfx Abush

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 14415, spindle speed (max.): 3,400 rpm, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 360 mm, grinding diameter: 400 mm, TECHNICAL DETAILS Travel distances X-axis travel: 900 mm Y-axis travel: 550 mm Z-axis travel: 360 mm Centre height: 950 mm Grinding diameter: 400 mm Table length: 790 mm Table width: 380 mm Maximum spindle speed: 3,400 rpm MACHINE DETAILS Cjdpfx Aoxgdq Rsbusrh Control: Siemens SINUMERIK EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Crsdpfxsxf Ak To Abush Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Control: Fanuc 16T Cedpfx Aexlix Debusrh

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) Codpfxjxh Rqts Abuorh TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: as good as new (ex-display), Year of construction: 2022, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor Crsdpoxaaxqofx Abush - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 840 D SL, overall weight: 5,200 kg, CONTROLS .. CNC controls SIEMENS 840 D SL ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 5200 kg Microfinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding. -11000 houers Workpiece spindles: 8 pieces Speed max 2000 rpm Number of finishing units 4 pieces Cjdpfxoxlh Dxe Abujrh max. speed 10'000 rpm max workpiece length 160 mm Loading height 1200 mm

Condition: ready for operation (used), Cylindrical Grinder, Surface Grinder, Schaudt MAR/750, Used Machine Overall Dimensions: Length: 2600 mm Width: 1740 mm Height: 1700 mm Weight: 4500 kg Electrical Data: 400 V; 7.5 kW; 16 A Grinding Specifications: Grinding Length: 750 mm Grinding Wheel Diameter: 500 mm Grinding Wheel Width: 90 mm Credjwhpdhspfx Abueh Morse Taper: No. 4 Work Table Rotatable: ±10° Factory manual included.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Universal Precision External Cylindrical Grinding Machine Studer S32 + Seckler Automation Manufacturer: Studer AG Switzerland CH Model: Studer S 32 + Seckler Modulo 300 Automation Control unit: Fanuc 16i TB CNC Year of construction: 2006 Condition: Well-maintained, original Machine weight approx.: 6,000 kg Accessories: - As shown in photos - Documentation - Coolant system Machine inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price ex stock, plus VAT. Condition: good - ready for demonstration Delivery: ex stock, as inspected Payment: strictly net – upon receipt of invoice Cjdpfxewzbybj Abujrh Subject to prior sale and errors. We look forward to receiving your order. More machines and equipment available from stock – please inquire. We look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Cedpfx Aboxliwyoujrh Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: excellent (used), Year of construction: 2004, ABA sanding machine Starline CNC profile sanding machine Surface sanding machine Manufacturer [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Year of construction: 10/2004 Weight: 6000kg Space required [needed space ]approx. (W x D x H): 4.1m x 5.1m x 2.5m Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you. Credpfx Asvcm Eaobush

Condition: good (used), Year of construction: 2001, functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Csdpfx Abou Sqgqjusrh Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.