Used Knife grinding machines for sale
Catalog No. : 4733
Type: GB 3
Producer: Göckel
Zbiuipqt
Made in:
Characteristic:
Maximum grinding length: 300 mm
Total power demand: 20 kW
Engine power: 13 kW
Length of magnetic clamping table: 3000 mm
Width of magnetic clamping table: 200 mm
Machine height: 2000 mm
Machine length: 5300 mm
Machine width: 1300 mm
Machine weight: 5 t
10
diameter max. 230 mm
max. module 10
stroke of the table 5 - 115 mm
grinding length 180 mm
total power requirement 3 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,4 x 1,3 x 1,7 m
Ebhr83b
Gear shaping cutter grinding machine.
Sharpener tool grinder!
6
grinding diameter: mm
grinding length: mm
table length: mm
Total power requirement: 0,55 kW
machine weight approx.: 145 kg
dimension machine xH: 900x580x420 mm
These machines were in a sugar beet factory. The sugar beet cutting knives were sharpened with the machines.
There are 4 machines on sale!
- 3 pcs sharpening machine
- 1 pc. straightening machine
E8xpyklb8
_____
sharpening machine FFA 2000 for example sharpening: This machine is used to final-sharpen Koenigsfelder knives. (picture 1 - ...
3
Surface grinding machine Reform type 41/71
Magnet width 200 mm
grinding length 4,10 meter
Car7uq8gte
grinding motor 26,5 KW
swiveling magnetic table
wet grinding device
automatic infeed
function tested
5
branded knife grinding machine, make Reform, type AR 61 - 71, year 1998
working length 6.100 mm
working width 300 mm
table tiltable
magnetic separator
Cacw2e2wnx
10
large grinding length: 2600 mm
large sanding width: 150 mm
Grinding height: 120 mm
swiveling magnetic table, 2 parts: 1365 and 1170 mm
Grinding wheel/ring Ø: 200 mm
Grinding head speed: 1400 rpm
Grinding head drive power: 3.5 kW
small/large Grinding carriage speed approx.: 0.02/30 m/min
Grinding carriage delivery by impulse control
small Infeed stroke: 0.003 mm
electr. Connection: 380 V, approx. 7.5 kVA
Ft7lfad
Space requirement machine (LxWxH): 3800 x 900 x 1700 mm
2
Immediately available (KW 22/2022)
Reconditioned / like new knife sharpening and setting robot
for knife rings PZKR 14-450/66
Ring diameter: 1400 mm
Knife length: 450 mm
including:
- new hydraulic
- new pneumatic unit
- new water pumps
- new grindstones
- new control cabinet
- new sensor
W7u3on7x
- Siemens S7 PLC control new, up to date including visualization (Touch PC with Win10 and InTouch 2014RS)
6
- Grinding length : 3050mm
- Grinding width : 250mm
- Grinding wheel Ø : 350x75mm
- Longitudinal axis speed (X) : 30m/min
- Z transverse axis speed : 3m/min
- Y vertical axis speed : 3m/min
Caelsil9cu
- Grinding spindle drive : 11 KW
- Dimensions (LxWxH) : 5300x1600x2400mm
- Weight (approx) : 8000 kg
Special Features : electrical cabinet (600x1800mm) / control panel (600x600mm) / filtration system (1300x800mm).
5
Reform CNC Knife Grinding Machine/Blade Grinding Machine.
Model AR 55 Type 7.
Year 2008.
Siemens 840D CNC.
for curved and straight knives.
Electro-magnetic-chuck 4500 x 300 mm.
Grinding length 5500 mm.
Grinding height 220 mm.
Segmental grinding head diameter 460 mm.
Grinding spindle drive motor 37 kW.
Grinding carriage speeds while grinding flat knives to max. 35000 mm/min.
Coolant unit.
Wet grinding attachment.
Bz3kgvekxh
Paper band coolant filtration unit.
Marposs In-Process measuring system....
5
Good condition complete long blade grinding machine manufacturer MVM KX 250 grinding machine. Year of manufacture 2002. clamping length max. 1.500 mm. Servo motor must be replaced.
Gyihjg
4
Fixed magnet
Grinding length 4100 mm
Grinding motor 27 KW
Magnetic width 350 mm
Bempm3mgxh
Elgo single axle control Z axis
AEG control
incl. water + magnetic roller
Option:
Conversion to S7 Siemens control
Lenze servo drives
Siemens touch panel
6
Automatic sharpening machine tool grinder STEHLE SM
TECHNICAL DATA:
0.75 kW engine
Grinding spindle speed 2400/3800 rpm
Pneumatic-hydraulic movement of the sanding slide
B0tyybz0ru
The dividing apparatus
Lifting and adjusting the grinding wheel
Wet grinding direction with magnetic filter and splash protection
Grinding discs fi 200 mm
Grinding areas:
- grinding length up to 200 mm
- a tool for diameter 400 mm, with an automatic dividing head
Special pads
Grinding mandrel
Grinding wheel
5
High performance knife grinding machine:
Reform AR61
Model:6 SA
Machine number:G 346
Condition:ready for use (used)
Operating hours:6586
grinding length 6100 x 250 mm
Bzhiayhkjb
4 magnetic plates
1 cooling tray
1 belt filter
2 segment heads
6 grinding rings
13 grinding wheels (diameter 400 mm) and div segments included in accessories
The photos follow.
4
Knife Grinding Machine
Guktyclo8
Make ELU
Type AS 70
2800 rpm.
for long and planing knives
grinding length 700 mm
380 volts
5
Profile knife grinding machine
Brand: Schneeberger
Type: Sculptor
Year of manufacture : 1983
Condition : Good
Pvkf2m
7
grinding wheel diameter 250 mm
connected load frequency 230 V
turning speeds 90 U/min
total power requirement 0,2 kW
weight of the machine ca. 18 Kg
dimensions 470 x 300 x 440 m
D2hhjun
Knife sharpening machine
Grinding wheel 250 x 50 x 12mm, grit 220
Leather disc 200 x 30 x 12mm
7
AR25 Type 71 HMT
Manufacturer: Reform Maschinenfabrik Fulda
Place of manufacture: Fulda
Comm. 4893
YEAR OF MANUFACTURE: 1991
Technical data:
grinding length: 2500mm
Dzue2vu93
passage width: 480 mm
magnetic table: 2500x202 swivel magnet
drives: Baumüller
Control: Mitsubishi
Pendulum pole pitch: P18
pole reversal: Wagner automatic pole reversal device
Grinding motor power: 20kw
Grinding motor speed: 932 rpm
grinding motor infeed: 0,005 mm - 0,1 mm
infinitely adjustable via limit switches/pulse pau...
9
We are a family producer of machines based in eastern Poland.
All our machines are in 100% build in GRAFS factory in Poland.
We present heavy-duty straight knife grinder suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives and paper knives.
TECHNICAL FEATURES MODEL SR150:
- Max length of grinding - 1200 mm
- Max grinding width - 200 mm
- Infeed range: 0.003- 0.03 mm (automatic or manual - depend from the order)
-...
8
grinding wheel diameter 250 mm
Hbmkdbqqq
connected load frequency 230 V
90 - 180 U/min
weight of the machine ca. 18 Kg
dimensions 470 x 300 x 440 m
Knife sharpening device with variable speed
Grinding wheel 250 x 50 x 12mm, grit 220
Leather disc 200 x 30 x 12mm
We are a family producer of machines based in eastern Poland.
All our machines are in 100% build in GRAFS factory in Poland.
GRAFS GR180 is heavy-duty straight knife grinder suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper knives.
The model from the offer is equipped with a neodymium magnetic table 1800 mm, we can equip the machine in an electromagnetic table upon request.
As a producer, we ...
Used Knife grinding machines
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 250,000 inquiries per month
Sample sales contract for used machines in nine languages
Olympic Games: Machineseeker sponsors Team Germany
Photo gallery: The World's 10 biggest excavators
