Used crankshaft grinding machines for sale (14)

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Accessories: - Measuring system - Tailstock Gtjdpfxewz Rg Ds Agbot - Coolant system - Documentation

Condition: used, In our opinion, the machine is in good used condition and can be inspected Gtedpfxsx Ik Tko Agbst under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Machine fully operational, everything complete. Godpfx Agex Ezlrobstt

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface Gsdot Uufbspfx Agbett The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Gtsdpfexxybpjx Agbot crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: excellent (used), Year of construction: 2013, operating hours: 2,730 h, functionality: fully functional, workpiece weight (max.): 150 kg, clamping length: 1,700 mm, grinding wheel diameter: 660 mm, center height: 270 mm, grinding length: 1,500 mm, 1 pc. used crankshaft & camshaft cylindrical grinding machine Brand: BERCO Model: LYNX 2000 Year of manufacture: 2013 Technical Data Max. grinding diameter (plunge grinding): 220 mm Max. grinding diameter (cylindrical grinding): 300 mm Max. workpiece weight between centers: 150 kg Center height above table: 270 mm Gjdpfou R Nvujx Agbstt Distance between centers: 1,700 mm Max. grinding length: 1,500 mm Chuck diameter: 180 mm Tailstock quill travel: 50 mm Max. grinding wheel diameter: 660 mm Min./max. grinding wheel width: 20 / 80 mm Max. circumferential speed: 35 / 80 m/sec Grinding spindle head (X-axis) Axis drive with linear motor - travel: 490 mm Measuring system: optical scale, resolution 0.0001 mm Workpiece headstock (C-axis) Workpiece spindle speed range: 1 - 1,000 rpm Encoder measuring range - resolution: 0.0001 degrees Table (Z-axis) Axis drive with linear motor Measuring system: optical scale - resolution 0.0001 mm Machine dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Space requirement: approx. 7,500 x 5,000 mm Machine weight: 9,850 kg Accessories: CNC control Siemens 840 D Oil cooler Coolant system with treatment unit

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Gtedpfsu Ng Dtox Agbst Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, machine/vehicle number: 20308, gr. swing Ø: 600 mm Centre distance: 2200 mm gr. grinding-Ø with grinding wheel 800 mm Ø: 125 mm grinding wheel Ø when using the setting sticks: 20 - 125 mm grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table shift by hand coarse/fine: 10/2 mm automatic. Feed speed of grinding wheel: 0,005 - 0,025 mm 6 table speeds: 120 - 1540 mm/min Godpfx Agecik N Sjbett Grinding headstock drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement : 6100 x 2300 x 1600 mm weight : 7 t

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Gjdpsrtrxxefx Agbott Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request Gedpjt Uuf Usfx Agbett front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder Gtodoxxx Rpopfx Agbot crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, Year of construction: 1981, workpiece length 1500 mm stroke 0 mm Gtsdjt Hwpmopfx Agbet swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, I have a lot of Comec Berco Sunnen Az kwik-way machines for sale please write I will reply immediately whatshapp Gjdjv Suvlepfx Agbett

Condition: excellent (used), Berco rtm 350 crankshaft grinding machine for sale in very good condition, equipped with a diamond cutter for quick grinding of the grinding wheel (brand new diamond), new plates, central water unit equipped with a magnetic roller for chip cleaning, complete original instruction manual 4 wheels with their wheel holders etc... Gedpfeiv H Hzjx Agbett