Used Cylindrical grinding machines from 2100mm grinding length for sale (26)

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Hodpfx Afsh U Rznoisfn Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: good (used), Year of construction: 2006, functionality: fully functional, grinding length: 4,000 mm, Main Technical Features Technical / Dimensional Data Max. swing diameter over bed: 900 mm Max. grinding diameter (with new wheel): 820 mm Max. grinding length: 4000 mm Hsdpsxni Sijfx Afiefn Max. static workpiece weight on steadies: 3,000 kg Max. workpiece weight in chuck: 300 kg (max. overhang 250 mm from spindle nose) External grinding wheel dimensions (Ø × width × bore): 915 × 100 × 305 mm Peripheral speed of grinding wheel: 45–60 m/s Plunge grinding feed rate roughing: 0.5–50 mm/min Plunge grinding feed rate fine: 0.001–0.01 mm/min Longitudinal grinding feed rate roughing: 0.01–0.05 mm/min Longitudinal grinding feed rate fine: 0.001–0.01 mm/min Machine length: 9,200 mm Machine width: 3,800 mm Machine height: 2,630 mm Total weight (approx.): 25,800 kg Max. noise level with motors running: 80 dB Workhead Centre angle: 60° Quill taper: Morse 6 Spindle mounting: ASA 6 Spindle motor power (S1): 22 kW Speed range: 3–250 rpm Electric Tailstock Centre angle: 60° Quill taper: Morse 6 Total quill stroke (stroke + centre eject): 78 + 15 mm Force transducer (maximum display value): 10,000 kg Quill adjustment motor: 6.1 Nm Tailstock body longitudinal displacement motor: 0.18 kW Grinding Wheel Dimensions Outer diameter: 915 mm Width: 100 mm Bore: 305 mm Max. wheel width: 130 mm Min. permissible wheel diameter (worn wheel): 630 mm Grinding Slide / Feed Axes Peripheral speed of grinding wheel: 45–60 m/s Max. grinding spindle speed: 2,000 rpm Grinding spindle drive (brushless, AC): 37 kW Cross-axis X – servomotor (brushless): 7 Nm Cross-axis X – rapid traverse manual: 7,000 mm/min Cross-axis X – rapid traverse automatic: 10,000 mm/min Cross-axis X – travel: 510 mm Longitudinal axis Z – servomotor (brushless): 14.7 Nm Longitudinal axis Z – rapid traverse manual: 7,000 mm/min Longitudinal axis Z – rapid traverse automatic: 15,000 mm/min Longitudinal axis Z – travel: 4,300 mm Auxiliary slide Z2 (taper grinding) – servomotor: 7 Nm Z2 – rapid traverse manual/automatic: 7,000 mm/min Z2 – travel: 360 mm Grinding head swivel B-axis: ±7° B-axis fast swivel speed manual: 0.3 mm/rev B-axis fast swivel speed automatic: 0.4 mm/rev B-axis drive (brushless, with gearbox): 2.15 Nm Standard Equipment CNC control Siemens Sinumerik 840D, PCU50, Windows XP Pro SP2 Marposs E82 gap control safety device Hydraulic power unit for various machine functions Hydraulic unit for automatic lubrication Oil unit for hydrodynamically mounted grinding spindle Hydrodynamic grinding spindle Electric tailstock with force transducer and digital display of contact force 1 grinding wheel flange Ø 305 mm 2 dead centers with carbide, Morse 6, with extraction nut Balancing arbor for grinding wheel Tie rod and mounting brackets for machine anchoring Modem for remote access and data transfer from the CNC Service tool set Geometry inspection protocol Hook for wheel change Glass linear scale on X-axis (additional backup encoder) Optical rotary encoder for B-axis angular positioning Optional Equipment (included in scope of delivery) Raised center height 450 mm 1 additional grinding wheel flange Ø 305 mm Special grinding head for taper grinding in longitudinal grinding mode

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: OE-70109, workpiece weight (max.): 500 kg, grinding length: 2,500 mm, grinding wheel diameter: 760 mm, total width: 4,500 mm, total length: 5,000 mm, total height: 2,900 mm, spindle speed (max.): 2,200 rpm, overall weight: 9,000 kg, workpiece spindle speed (max.): 500 rpm, controller manufacturer: FANUC, controller model: SERIES OI-TF, clamping length: 2,600 mm, grinding wheel bore: 304 mm, spindle mount: MK 6, tailstock quill stroke: 60 mm, workpiece diameter (max.): 850 mm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 3 x 100 A Connection: 63 kVA Hfedpfx Asxm Tvcjfisn Grinding spindle: Feed X-axis Feed Z-axis Peripheral speed of grinding wheel: 45 m/s Incl. robotic cell from manufacturer XACTOOLS with loading unit and vibratory bowls, as well as an industrial robot from manufacturer EPSON, max. payload: 8 kg Incl. documentation NOTES ON COLLECTION: Collection must take place definitively between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 1973, Additional flanges and a spindle for internal grinding are included with the machine. The Jones was completely disassembled and inspected; it works flawlessly. The price is for one machine. Hodew Dvwaopfx Afiefn

Condition: new, Year of construction: 2025, functionality: fully functional, BSD Series — Universal External Cylindrical Grinding, Medium to Large Sizes Distance between centers: 700 / 1000 / 1600 / 2500 / 3000 mm Center height: 175 / 225 / 275 / 400 mm Max. workpiece weight: up to 500 kg Max. grinding wheel diameter: Ø 750 mm. Turret grinding head with up to 4 spindles. Optional axes/functions: C-axis (workpiece rotation, thread/out-of-round). Control: PLC (NC) / CNC. Applications: External cylindrical, face, taper, thread, and profile grinding; combination with ID grinding possible. BSE Series — Universal External Cylindrical Grinding, Large/Long Workpieces Distance between centers: 1500 / 3000 / 4000 mm Center height: 315 / 400 mm Max. workpiece weight: up to 2500 kg Max. grinding wheel diameter: Ø 900 mm. Turret grinding head with up to 4 spindles. Optional axes/functions: C / B / U / Q (including swiveling workpiece holder, swiveling chuck). Control: PLC (NC) / CNC. Applications: Ideal for single-clamping of complex external machining with high shape accuracy. Key Features (both series) Machine bed: Cast iron, ribbed, naturally aged; flat/V-guides, hand-scraped, anti-friction lining. X/Z ball screw drives, AC servos, linear scales. Grinding head: left/right/fixed angle; turret with up to 4 spindles; automatic dynamic balancing from Ø 250 mm. Tailstock: hydraulic actuation, adjustable force, taper deviation correction. W-axis optional. Internal grinding (optional): Belt or HF spindles, direct drive, water cooling. Control: PLC (NC) or CNC, graphical interface, process analysis data output. Options & Peripheral Equipment Dressing: CNC/manual; single-point, multi-point, diamond rolls/discs; Y-axis for form dressing with rolls. Hfodpfsxnmrtsx Afisn Measuring & Monitoring: In-process/post-process gauging, axial touch probe, gap/crash/dressing/position control. Clamping & Supports: Between centers, chucks, drivers, face drivers, power-operated clamping systems, steady rests (fine-adjustable, self-centering). Abrasives: Ceramic, CBN, diamond. Automation: Integrated gantry or robot loading possible. Financing Leasing/financing available: 24 months.

Condition: excellent (used), Center height 300 mm Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm Hjdpetpgnhefx Afisfn With DRO With measuring control MARPOSS Misc.accessories MARCELS MASCHINEN AG

Condition: excellent (used), grinding length: 3,500 mm, center width: 5,000 mm, Cylindrical Grinding Machine Manufactured by Joh. Schehr, Meuselwitz Type SAXW 1000 Hfsdpswb Dq Nefx Afijn Weight 33 tons Center distance 5000 mm Grinding length 3.5 meters Concave and convex grinding direction Total length 9.6 meters Width 3 meters Height 2.4 meters 380 volts The machine can be inspected under power at the supplier's factory.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, External cylindrical grinding machine Made in Germany featuring a robust structural design. Extremely precise and ready for operation. Previously owned by a German machine builder. The machine underwent a complete overhaul including a CNC control and drive RETROFIT in 2008. Manufacturer: SCHMALTZ Model: R 5-3000 Hsdpfx Afoxnhxzoiofn Year of manufacture: 1971 Max. workpiece diameter: 630 mm Max. workpiece length: 3000 mm Grinding wheel diameter: 800 mm Grinding wheel motor power: 30 kW Grinding wheel speeds: 500 / 1000 rpm Workpiece spindle speeds: 12 – 150 rpm Total weight: 15 tons Equipment and accessories: Overhauled and retrofitted in 2008 Fully equipped with: EMAG grinding wheel profiler with Siemens 840 D CNC control Heidenhain digital readout (DRO) Marposs E9 measuring unit 11 steadies Coolant tank with filtration system

Condition: used, Spare or accessory parts for SCHAUDT. Parts stored for a longer period; the flanges are definitely from a SCHAUDT cylindrical grinding machine. All other parts may belong to a SCHAUDT, but no guarantee is provided for this! Hodjxdwxpepfx Afijfn

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm total power requirement kW Hsdpfx Afount Eyoiofn weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: Hfedpfxstximvs Afijn • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: excellent (used), Churchill Model D Cylindrical Grinder 25″ / 635mm Swing Over Bed, 118” / 3000mm Between Centres, 26″ / 660mm Dia Wheel, Swivel Table Coolant Tank & Pump, Hjdpfew U Undox Afisfn 4 off Steadies,

Condition: good (used), Max. diameter: 560mm Working length: 3550mm Hfsdpfov Dvzysx Afisn Max. workpiece length: 4000mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 63 CNC 3000 Hsdpfx Afjv N D Hboiefn Centre height: 630 mm Centre distance: 3000 mm 1 grinding wheel: 500/380 x 100 x 203 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 10/2005/02, center height: 690 mm, workpiece weight (max.): 10,000 kg, grinding length: 8,000 mm, grinding wheel diameter: 900 mm, total width: 3,500 mm, total length: 15,100 mm, total height: 2,000 mm, grinding diameter: 550 mm, type of input current: three-phase, spindle speed (max.): 50 rpm, spindle speed (min.): 5 rpm, grinding spindle motor power: 2,200 W, grinding spindle speed: 920 rpm, overall weight: 36,000 kg, input frequency: 50 Hz, input voltage: 400 V, Equipment: rotational speed infinitely variable, External cylindrical grinding machine Hfjdpfxewwrvro Afisn Manufacturer: Metex Control unit: Siemens, type Sinumerik 840 D Centre height/distance: 690 x 8,000 mm Max. grinding wheel diameter: 900 mm Coolant filtration system Tailstock with grinding wheel dresser Hydrodynamic grinding spindle

Condition: refurbished (used), Year of construction: 2025, Schaudt PF5 UB 1000-2500 mm grinding length: 1.000 / 1.500 / 2.000 / 2.500mm Center height: 180 / 225 mm (optionally more possible) Workpiece weight: 350 / 500 / 800 kg (optionally more possible) Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast set-up via GSN user interface - Diatronic measuring device - B-axis freely positionable - second external grinding wheel Hfodpfx Afsfg Tazjisn - internal grinding unit - center elevation - dressing spindle for diamond form roll - balancing and grinding sensor system - Tailstock hydraulic clamping / unclamping - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hfsdpfov Tnhwex Afien Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: good (used), Year of construction: 1981, functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Hjdpfx Afst I Dppoisfn Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg Hjdpovb Dl Ujfx Afiefn work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Hfedpfxswdmy Sj Afion Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 3M194 / 4000, center height: 325 mm, workpiece weight (max.): 3,000 kg, grinding length: 4,000 mm, total width: 4,100 mm, total length: 13,100 mm, total height: 2,450 mm, grinding diameter: 630 mm, workpiece weight between centers: 1,500 g, workpiece length between centers: 4,000 mm, overall weight: 32,750 kg, I can offer cylindrical grinder 3M194 (630 x 4,000 mm) Max. grinding length 4,000 mm Max. swing over bed 630 mm Grinding diameter 40 - 560 mm Voltage 380 V / 50 Hz Grinding wheel motor 43 kW Total power requirement 60 kW Max. load mounted on centers 1,500 kg Max. load mounted in chuck 3,000 kg Length 13,070 mm Width 4020 mm Height 2,455 mm Hfjdpfx Afewir Thjijn Weight 32,750 kg

Condition: refurbished (used), Year of construction: 2025, Schaudt PF61 1000 - 4000 grinding length: 1.000 / 2.000 / 3.000 / 4.000 mm Center height: 260 mm Other freely selectable options: - completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - fast set-up via GSN user interface - Diatronic measuring device - B-axis freely positionable - second external grinding wheel - internal grinding unit - center elevation - dressing spindle for diamond form roll - balancing and grinding sensors - Tailstock hydraulic clamping / unclamping Hfodpfjiqxt Hjx Afijn - Autom. Siemens door drive - 19" / 22" screen - remote maintenance - conversion to needle nozzles - suitable coolant / exhaust system - automation preparation - and much more We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm.

Year of construction: 1966, condition: used, machine/vehicle number: 12485, grinding diameter:350 mm grinding length:2500 mm centre height:180 mm total power requirement:5,5 kW Hfjdpfx Aoi E Ix Njfion weight of the machine ca.:5,5 t

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200 Hodpepy A Iqjfx Afisfn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Hodou U Ewgepfx Afiefn It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.