Used Grinding And Polishing Machine for sale (69,629)

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Codpfxodzqn Dj Aa Ejpw Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm Csdpfxjdzqmhe Aa Eopw weight 850 kg good condition

Condition: ready for operation (used), - double grinding and plishing machine Codpfedz Uzbex Aa Eepw - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° Cpedpfoi Hp Nrjx Aa Eow - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Year of construction: 2001, condition: ready for operation (used), Connected load: 26kVA, weight: 3.5t. Cpodpfx Aajg E Uhfj Ejw

Year of construction: 2016, condition: ready for operation (used), A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible. Csdpjvzbg Asfx Aa Espw

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Cpjdpfexg Rhpsx Aa Eow

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Csdpfx Aasxxaito Espw

Condition: good (used), Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench Csdped D R Sxsfx Aa Ejpw -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg

Condition: used, functionality: fully functional, 1 used grinding and polishing machine Manufacturer: ATM Model: Saphir 320 Year of manufacture: 2003 Technical specifications: 320 Series - Single wheel Plate/disc diameter: 200 mm Cpedpfxsxuq I Sj Aa Eew Speed: 600 rpm Voltage: 220 V / 60 Hz, 1 phase Weight: 24.5 kg

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Cpedeiqghzjpfx Aa Esw Total length: 12500mm

Year of construction: 2008, condition: used, “Alan Richardson” automatic pipe polishing machines can also be used for grinding, removing dirt, oxidation, rusting. The machine is in good used condition, fully working. Can be tested. Cjdpfx Aaeph T N So Ejpw Specification: Model: Alan Richardson Made in: England Year: 2008 Pipe length up to: 1700 mm Documentation: included Place: Marijampole, Lithuania If you have more questions, we will be happy to answer them.

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: Cpedpfewy Ulzjx Aa Eow - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Condition: good (used), HR 4 automatic polisher Csdpjqmfv Defx Aa Eepw Manufacturer: Hau With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel Csdpfxsptc Ds Aa Espw - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE Cpodsirfpgopfx Aa Eew MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) Csdpoxx Uudofx Aa Ejpw • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Codpoq I Nw Iofx Aa Ejpw

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 Cedoymwxpepfx Aa Ejpw - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 Codpfjymww Sex Aa Ejpw - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E Cpodpetr Azkofx Aa Eow On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Cpedpfjyl U Nvox Aa Esw Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, grinding length: 1,850 mm, workpiece weight (max.): 2,700 kg, grinding height: 700 mm, grinding wheel diameter: 450 mm, spindle speed (max.): 1,450 rpm, Machine built in heavy-duty industrial design with very high table load capacity! TECHNICAL DETAILS Longitudinal travel: 2,000 mm Cross travel: 750 mm Longitudinal grinding length: 1,850 mm Cross grinding length: 830 mm Grinding height (vertical): 700 mm Table support: 1,700 mm Maximum longitudinal speed: 39 m/min Maximum cross speed: 4 m/min Maximum cross feed rate (infinitely adjustable): 40 mm/min Maximum grinding spindle speed: 1,450 rpm Grinding wheel dimensions: 450 × 80 × 203 mm Cjdeymxybopfx Aa Eepw Maximum table load: 2,700 kg Magnetic chuck dimensions: 1,700 × 550 mm MACHINE DETAILS Control model: ROSA Grinding wheel motor power: 14.7 kW Hydraulic unit power: 9.4 kW Machine weight: 11,200 kg Noise level: 76 dB(A) EQUIPMENT CNC-controlled movement axes

Condition: ready for operation (used), functionality: fully functional, center height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 3,000 kg, controller model: MARPOSS E54, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Centre height over bed: approx. 150 mm Centre distance: approx. 700 mm Grinding wheel diameter: approx. 300 mm MACHINE DETAILS Control: MARPOSS E54 Operating voltage: 3 x 380 V Cedpfx Aeylaf Nea Eepw Frequency: 50 Hz Rated current: 17.8 A Connection load: 9.84 kVA Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,000 mm Weight: 3,000 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 113981, center height: 180 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, overall weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Cpedpfx Aoyladfea Eew Centre height: approx. 180 mm Centre distance: approx. 2,000 mm Grinding wheel diameter: approx. 400 mm Grinding wheel width: 100 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 30 A Connected load: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 7,000 x 2,000 x 1,800 mm Weight: 5,000 kg