Used drill grinding machines for sale (56)

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m Hodpfx Asu Ng Ncecdsn The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min Hsdpfxou Ng Hns Acden total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: good (used), Year of construction: 1992, machine/vehicle number: 063592, Offer 26067 Technical data: - Working range: 1.5 - 60 mm - Adjustable spindle angle: 40° - 180° - Motorized spindle adjustment - 6-jaw chuck Hjdpfxsy U U N Nj Acdon - Coolant system - Lighting - Drive, grinding head: 400 V / 0.38 kW - Drive, electric spindle: 400 V / 0.18 kW - Space requirement: approx. W 750 x H 1200 x D 750 mm - Weight: approx. 100 kg

Condition: ready for operation (used), DAREX AP 5000 / Precision spiral drill grinding machine Hodpsy U H Ecsfx Acdsn -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard spiral drills (HSS cobalt, optionally carbide) -Grinding types: conical taper, and automatic cross-grinding (split point) to reduce the transverse cutting edge -Automatic operation -Various inserts Dimensions: L x W x H 0.5 x 0.5 x 0.4 meters / Weight 50 kg Errors and omissions excepted.

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Hodjx Dbltjpfx Acdjn Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and Hedo R R R Sjpfx Acdon , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) Hsdpfebrpr Ujx Acdsn point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: Hsdpfx Acsbrptvjden • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Hedsguadnspfx Acdjn Paintwork gray Areas of application: Grinding cone shell Sharpening relief grinding Scope of delivery: CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: new, Drill Grinding Machine Make: MOTOM Hjdpfxeban Abe Acdon Model: BSM 34 grinding range 12-34 mm incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 12 - 25 mm increasing by 1 mm incl. set of pliers from 26 - 34 mm increasing by 1 mm

Condition: new, Drill Grinding Machine Make: MOTOM Hsdpfx Asb Ecp Aecdjn Model: BSM 22 grinding range 8-22 mm (with options up to 25 mm) incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 8-22 mm increasing by 1,0 mm

Condition: new, Drill Grinding Machine Make: MOTOM Model: BSM 13 grinding range 2-13 mm incl. CBN 200 grinding wheel for HSS tools incl. set of pliers from 2-13 mm increasing by 1,0 Hodpfx Ao Sgi Rocden

Condition: used, Technical details: drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Hedpfx Aoy Nk H Tjcden Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Hedpovbwvmjfx Acdon

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Hjdpsy H Iigsfx Acdon Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Hsdpou Ng Irsfx Acdjn Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1982, Technical details: Hsdeu Ngxdjpfx Acdsn dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: ready for operation (used), Year of construction: 1981, drill diameter 50 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t Hodpfxjwu Hklj Acden

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Hjdpfxoy Hb T Es Acdon Clean and good condition

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Hodpsnccx Hofx Acdsn

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° Hedpjxablxsfx Acdjn turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 2012, machine/vehicle number: 22002549, Offer 26118 Technical Specifications: - Possible working range with options: 0.3 - 30 mm - Max. disc diameter: 164 mm - Point angle steplessly adjustable: 118 - 150° Hodpfx Aoy Dfqiscdsn - Surface speed at the disc: 29 m/s - Rotational speed: 2800 rpm - Drive: 230 V / 0.2 kW - Required space approx.: W 450 x H 300 x D 450 mm - Weight approx.: 30 kg - Clamping range: 3.0 - 12 mm - Clamping range: 12 - 21 mm - Grinding attachment for 3-flute countersinks - Cross table

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Adjustable relief angle Hedpfx Acsx Ea Nmjdon Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Hjdpfx Aogy Ti Decdjn Dressing attachment MARCELS MASCHINEN CH

Condition: used, functionality: fully functional, 1 x drill grinding machine Darex Hsdpfx Acoyvhg Rsden M 5 with 2 x chucks The machine can be inspected under power.