Catalog No. : 5368
Producer: REISHAUER
Characteristic:
The machine is in good technical condition.
Bt8bnkdjmu
For sale thread grinder STANKO 5822M
The machine in very good condition, little used, the possibility of testing the grinder. The machine comes with a set of tools (cabinet).
The price is the net price.
Jwpw33
- Year: 1974
- Power: 10.5 kW
- Weight: 5000 kg
- Dimensions:
Length: 2560 mm
Width: 2288 mm
Height: 1450 mm
- Maximum diameter of workpiece to be ground: 200 mm
- Maximum length of workpiece to be ground: 500 mm
- Diameter of ground thread with a single-coil disc: 3-150 mm
- Diameter of g...
workpiece diameter 150 mm
threading length 500 mm
thread pitch 0 - unendlich mm
pitch angle +/- 90 °
Gpfvcgxf
Control Siemens 840 D
grinding diameter 150 mm
grinding length 500 mm
profile depth 40 mm
number of teeth 1 - 999
total power requirement 30 kW
weight of the machine ca. 13,5 t
dimensions of the machine ca. 6,5 x 5,5 x 4,5 m
Worm- and Rotor Grinding Machine
- top condition
Equipment / Accessories:
- very many accessories
- filter system
thread dia. 150 mm
grinding length 2200 mm
Srjxn3iz
thread pitch 300 mm
Control BECKHOFF
total power requirement 25 kW
weight of the machine ca. 8000 kg
dimensions of the machine ca. m
Maximum workpiece length: 250mm
Maximum workpiece diameter: 30mm
Minimum workpiece diameter: 3mm
Number of grooves: 2-12
Grinding length: 150-180mm
Adjustment angle: +/- 5
Grinding wheel dimensions: 400x25x160
Workpiece holder: For all common Gb-quadrant holders or special chucks are available. Loading grippers are also available.
Generation of the profile: Thread by means of slide roller, gate freely programmable.
Machine 2x available, 1x with year of construction 1999.
Bth2rv7x0x
STANKO - 5822M- thread grinder- 4500 kg- max diameter: 200 mm - max length: 400 mm - max workpiece weight: 50 kg
Yskdc8
Reishauer RGM
Gewinde- und Schneckenschleifmaschine
Typ: RGM
Ptx8xi
Model: 1996
Viel Zubehör/Ersatzteilen
Automatische Schnittgeschwindigkeitseinstellung für konstante Schnittgeschwindigkeit
Kapazitätsbereich Schleiflänge: 385 mm
Capacity Grinding length: 385 mm
Gewindedurchmesser: 160 (210) mm
Thread diamater: 160 (210) mm
Werkstückdurchmesser: 210 mm
Workpiece diamater: 210 mm
Gewindesteigung: 0,25-52,0 mm
Lead: 0,25-52,0 mm
Gewindeprofilhöhe: 18mm
Steigung bei Einprofil-/Mehprofilscheib...
GENERAL
Project No: 905236
Quantity: 1 pc.
Manufacturer: MIKROMAT
Type: 3G
Control: MIKROMAT
Year of Manufacture: 2020
Condition: Used Machine
Machine on approx. [h]: 10
DESCRIPTION
GRINDING
Max. grinding diameter 300 mm
Max. grinding length 300 mm
Max. workpiece weight 50 kg
Centre distance 450 mm
Ovhq7
Travel in X/Z 310/300 mm
Max. rapid traverse in X/Z 4/15 m/min
Max. cutting feed in X/Z 1/5 m/min
Belt-driven grinding spindle for external grinding wheel
LH with max. diameter x width x bor...
Universal worm and thread grinding machine MATRIX 46
Manufacturer: Matrix
Made in: England
Specification:
Max. work-piece diameter: 254 mm
Max. distance between centers: 1066 mm
Max. length of grinding: 1041 mm
Max. capacity of collet chuck: 38 mm
Dimensions of standard grinding wheel: 408x25x205 mm
Limits of grinding head turning: 45 degrees
Centre tapers: Morze # 4
Thread pitch: 0,42 – 305 mm
Max. pitch correction: 0,1 mm on 100 mm of length
Bqzq3nw0ty
Adjustable backing-off: 0-5 mm
Number o...
Unused condition
G7rdj79
MARCELS MASCHINEN CH
JUNKER Jumaximat 520 CNC
Bth2odpukl
year of manufacture 1999
Control SIEMENS
total power requirement 20 kW
grinding length 50 - 250 mm
Control CNC
machine weight 8 t
space requirement approx. 3460x2665x2100 m
grinding wheels 4 max.
O7ecf
Technical data
- Partial cut diameter10-32 mm ø 6-20 mm - Length of the
Machine type:
Thread cutting tool grinding machine Model: Jumaximat 520
Year 199/2011 partial overhaul at the manufacturer, Fanuc control, Fanuc robot, pendulum device in the table over a curve, grinding wheel honing device over a diamond roll, CO2 extinguishing system, tailstock positioning, back grinding device with 3 back grinding curves, grinding wheel package can be measured, short loading time (approx. 5 sec.) in the machine.
Thread diameter 3 - 25,4 mm
Thread length max. 150/180 mm
Clamping length 45 - 250 mm
Thread pitch and depth of cut programmable
grindin...
Technical data
Control Siemens 840 D
max. axis travel
x-axis 320 mm
Y-axis 270 mm
A-axis 360 °
B axis +- 20 °
Max axis speed
X axis 10,000 mm/min
Y-axis 10.000 mm/min
A-axis 2,000 mm/min
B axis 5,400 mm/min
Axis resolutions
X-axis 0,0001 mm
Y-axis 0,0001 mm
A-axis 0.0002 °
B axis 0.001 °
Tools and work piece
Number of gears 1...999
Pitch height min 0,1 mm
Pitch height max 1000 m
Helix angle 0...+20 degrees
Electrical equipment
Supply voltage 400 V
Light voltage 230 V
Frequency 50 Hz
Connected lo...
6 axis CNC thread grinding machine based on a natural granite bed.
Equipped as standard with:
SIEMENS 828D control
SIEMENS SINUMERIK with pdf converter for the profiles
SIEMENS AC servo drives
Bho2gltfzp
MARPOSS electronic balancing unit
HEIDENHAIN linear measuring systems
Servo motor adjustment of the pitch angle + - 25 °
CNC controlled dressing unit
Grinding oil temperature controlled
Filter system
Compressed air dryers
Grinding length: 500 mm
Grinding diameter: 350 mm
Max. Workpiece weight: 5...
Internal thread grinding machine MATRIX 69 Type 2
Manufacturer: MATRIX
Made in: United Kingdom
Specification:
Max. lead: 50 mm
Max. diameter of bore: 250 mm
Min. diameter of bore: 25 mm
Max. diameter of component: 330 mm
Max. length ground: 200 mm
Tayokvxv
Diameter of bore in work spindle: 51 mm
Max. distance from spindle nose to grinding wheel centre line: 394 mm
Diameter of grinding wheel: 13-102 mm
Grinding wheel speeds: low 13000-18000 rpm, high 36000-42000 rpm
Coolant capacity: 227 l (nor...
JUNKER Jumaximat 520 CNC
year of manufacture 2001
Control SIEMENS
total power requirement 20 kW
O7ecf
grinding length 50 - 250 mm
CNC control
machine weight 8 t
space requirement approx. 3460x2665x2100 m
grinding wheels 4 max.
Technical data
- Partial cut diameter10-32 mm ø 6-20 mm - Length of the
machine type:
Thread cutting tool grinding machine Model: Jumaximat 520
Willi Goebel
Mv7fio
Thread grinding machine MSO GA2 - 250 NP
Year of manufacture 1989
Maximum workpiece length: 250mm
Maximum workpiece diameter: 30mm
Minimum workpiece diameter: 3mm
Number of grooves: 2-12
Grinding wheel dimensions: 400x25x160
Workpiece chuck: For all common Gb-quadrant chucks, or special chucks are available. Loading grippers are also available.
Machine is offered with one grinding wheel flange, dressing roll and grinding wheels each.
Cmkfmsws
Incl. Kraft & Bauer fire extinguishing system
Various accessories on request.
Machine 2x available. The other with year...
Reishauer RAG thread grinding machine
Maximum workpiece length: 250mm
Maximum workpiece diameter: 20mm
Minimum workpiece diameter: 1mm
Grinding length: 230mm
Grinding wheel dimensions: 250x6x155
Number of grooves: 1-8
O2mrt
Adjustment angle: +/- 7
Workpiece holder: via square or with rotary hearth driver
relief grinding variants and sizes:
0,1mm
different shaping curves available
Generation of the profile: single profile (flank angle 54° - 62°) or with diamond dressing roll
Machine is offered wi...
Reishauer RAG thread grinding machine
Maximum workpiece length: 250mm
Maximum workpiece diameter: 20mm
Bsxi2xfuob
Minimum workpiece diameter: 1mm
Grinding length: 230mm
Grinding wheel dimensions: 250x6x155
Number of grooves: 1-8
Adjustment angle: +/- 7
Workpiece holder: via square or with rotary hearth driver
relief grinding variants and sizes:
0,1mm
different shaping curves available
Generation of the profile: single profile (flank angle 54° - 62°) or with diamond dressing roll
Machine is offer...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 220,000 inquiries per month
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
