Used Cut-off grinders for sale (12)

Condition: good (used), Year of construction: 1992, Special price : EUR 2.990,-- net, free loaded . Type TAM 25/600 machine no. 1010 year of construction 1992 . Technical data : Cr3D0Jjdhk Workpiece diameter approx. 1 - 25 mm Cutting spindle approx. 8,800 rpm Grinding spindle approx. 4,400 rpm Cutting wheel 125 x 1.5 x 20 mm Grinding wheel 100 x 50 x 20 mm . incl. second clamping prism for diameters up to 20 mm .

Condition: refurbished (used), Year of construction: 2020, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Bijgnmnfw2 Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: excellent (used), Year of construction: 1991, 1 used cutting machine make Degen type TAM 25 year 91 Machine no. 126 cutting spindle 8.800 rpm grinding spindle 4.400 rpm Bfj2Vikxayx workpiece diameter 0,8 - 25 mm cutting wheel Ø125 x 1,5 x 20 mm grinding wheel Ø100 x 50 x 20 mm Weight 150 kg dimensions 800 x 450 x 1.100 mm Accessories - coolant device - Instruction manual

Condition: used, Year of construction: 2022, Workpiece Ø: 3 - 25mm Chamfer angle: 20 - 65° Cutting disc Ø: 100 mm Overall performance: 2 kW Connected load approx.: 400 V / 50 Hz Cssq8Br9F8 Weight approx.: 350 kg Dimensions W x D x H =: 900 x 950 x 2100 mm colour: RAL2002 / RAL5007 Suitable for grinding the chamfer of carbide, HSS, metal alloys, stainless steel, ceramic, tungsten, carbon fibre, etc. for series production. Accessories: Total enclosure, Siemens control, Electronic angle adjustment 25 - 60 °, Laser measurement of the grinding wheel with automatic. Wear compensation, Magazine for long processing without interruption, Automatic central lubrication for all moving parts, Clamping flange for diamond/CBN cup wheel, Overflow sensor in the machine room with connection to the control system, Coolant system, Kraft & Bauer extinguishing system, Mist extractor, Oil collecting pan.

Condition: used, Year of construction: 1986, grinding wheel diameter 300 mm table length 0 mm Dpfk7R table width mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.5 kW Ccqncop -Speed: 3200/5200 rpm -grinding wheels: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Year of construction: 1992, Condition: reconditioned (used), Precision cut-to-length machine Make: DEGEN Model: TAM 25/600 year of construction: 1992 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / machine no.: 1017 with warranty geometric acceptance with test report accessories: B0Stkadcea - coolant unit - operating instructions - used, as seen -

Condition: used, Year of construction: 1992, The function The TAM 25/600 cuts ejector pins, ejector sleeves and hole punches and hole punches in the shortest possible time. Workpieces from 0.5 to 25 mm diameter made of tool steel as well as carbide can be machined. Simply insert the workpiece into the quick-clamping prism, set the desired finished dimension, and cut and cut to length in one go. On request, an additional clamping device for extremely thin, short or offset pins is available on request. Your advantages: - User-friendly quick clamping system - Quick insertion and removal of workpieces - Cutting and trimming to length in one operation - Additional clamp for thin, short and offset pins After cutting, the work table is locked in the final position, the length is precisely measured and ground to finished size with integrated micrometer infeed. The wear of the cup wheel is compensated by tracking the grinding spindle. The integrated diamond automatically dresses the wheel. On request, CBN or diamond wheels are also available as additional equipment for the TAM 25/600. Your advantages: Bijgnmnfw2 - Precise infeed of the workpiece by micrometer screw - Integrated dressing diamond for cup wheel - Integrated cooling lubricant device, it avoids the overheating of the workpiece - Adjustable grinding spindle, so that the cutting edge of the cup wheel always remains at the 0 position The precision Drive motor 1,1 KW Speed cutting spindle 11.000 u/min Speed grinding spindle 4400 u/min Workpiece - diameter 0,5 - 25 mm Workpiece length (with stop) 600 mm max. cutting wheel 125 x 1,0 x 20 mm 3Xhxsfwgzc grinding wheel 100 x 50 x 20 mm footprint 700 x 500 mm Weight (net) 135 kg The machine is in used condition. An inspection is possible on request.

Condition: used, Year of construction: 2022, Suitable for automatic cutting of HSS, solid carbide, ceramic tools/materials. Dppx8D Accessories: Total enclosure,Automatic loader,Automatic central lubrication,Conveyor belt 20 degrees with housing, for removal up to D=40Preparation for direct connection of the machine to the existing coolant system,Fire extinguishing system Kraft & BauerMist extractor,Oil collecting pan,Mounting flange D=97mm diamond/CBN,

Condition: new, Kürz - and length-grinding machine Make Duke Model LY 600 400V version Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1-25 mm Max length: 600 mm dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: -Measuring gauge with micrometer up to 600 mm length -Pot washer and blade Hwjfjj0 -Dressing diamond, incorporated -Manual

Year of construction: 2022, Condition: as good as new (ex-display), The function: The TAM 25/600 precisely separates and lengths ejector pins, ejector sleeves and perforated punches in a very short time. Workpieces from 0. 5 to 25 mm in diameter made of tool steel and carbide can be machined. B9P2Qtqinj Your benefits: Simply insert the workpiece into the quick clamping prism, set the desired finishing dimension and separate and lengthen in one stroke. An additional tensioner for extremely thin, short or detached pens is available on request. • User-friendly quick clamping system • Quick insertion and removal of workpieces • Cutting and cutting in one operation • Additional tensioner for thin, short and detached pins / additional tensioner for short workpiece lengths from a shaft length of 5mm!!! The precision After cutting, the worktable is locked in the final position, the length is precisely measured and ground to the finished dimension with integrated micrometer delivery. The wear of the pot disc is reduced by following the grinding spindle Your benefits: compensated. The integrated diamond automatically adjusts the disc. On request, CBN or diamond discs are also available as additional equipment for the TAM 25/ 600. • Precise delivery of the workpiece by micrometer screw • Integrated dressing diamond for pot disc • Integrated cooling lubricant device that prevents overheating of the workpiece • Traceable grinding spindle, so that the cutting edge of the pot disc is always the 0 position remains -Workpiece length with stop: 600m, length components also possible! -Workpiece diameter from 0. 5 to 25mm -Frequency converter controlled drive motor for stepless speed control -Diameter 125mm for a long service life and therefore cost savings -Pot disc diameter 100mm -Long-lasting and stable linear guides -machine weight of 250 Kg -Quality made in Germany

Condition: new, Cut-off machine Buoskbzutk Make: MOTOM Model: TSM chuck clamping range 3 - 30 mm Painting grey Fields of application: Cutting of cylindrical tools Free grinding of tool shanks Surface grinding of tool faces Grinding of grooves Scope of delivery: Three-jaw chuck 85 mm (chuck passage 16 mm). CBN cut-off wheel for HSS (100 x 1.4 x 12.7 mm) Corundum cutting-off wheel for HSS (100 x 1.0 x 12.75 mm)