Used double grinding blocks for sale (130)

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Type:R20 1 H Grinding wheel diameter 200 mm. Crelhcjtwnxuodw Aek

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Cslhcdju Uvv Tsw Aerk

Condition: used, Year of construction: 1980, length 900 mm width 1200 mm Crjlhcdwswp Tute Aok height 1400 mm 2 weight of the machine ca. 350 kg

Condition: excellent (used), Year of construction: 1992, Technical data: Cjlhcdwswq Ea Rj Ajrk - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Technical data - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg Crslhjvb Hgzscdw Aek

Condition: used, grinding wheel diameter 300 mm no. of working stations 2 Stück connected load 1,5 kW Crjlju Sbdmjhcdw Aek grinding wheel width 30 mm double sided.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Fan motor power - 2.2 kW Coloxw Sfkshcdw Ajrk Number of filter bags - 1 Power supply - 380 V Rated capacity - 3,300 m3/h Year of manufacture - 2013

Condition: excellent (used), I am selling an industrial table grinder. Price 550€/ for 1 piece. Crolhoud A A Secdw Ask

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz – Fitted with one 36 and one 80 grit corundum grinding wheel Cjljxf Uv Uohcdw Ajrk Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition

Condition: good (used), Grinding wheel diameter: max. 300 mm Rotational speed: 1,500 rpm Drive power: 1.5 kW Machine dimensions (L x W x H): 750 x 420 x 1100 mm Weight: approx. 130 kg Celhcdew Emahjw Ajrk Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, volt 380 V . quality schwere, stabile +++++ Please note: Celek Sat Sehcdw Aerk The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, grinding wheel diameter 300 mm no. of working stations 2 Stück connected load 1,5 kW grinding wheel width 30 mm weight 40 kg Cslhcdju Sbi Aew Aork double sided.

Condition: used, functionality: fully functional, used bench grinder, large Disc size = 400 mm - Tool rests - Eye protection shields Cjlhcdwoxuf Sxs Ajrk

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg Cjlhou Ngx Dscdw Ajrk dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: used, Double Bench Grinder AEG Type DWS 200/800M Cjlhexrgvajcdw Ajrk No: 87 644919 Year of manufacture: approx. 1970 Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: used, Year of construction: 2000, ja Cslew Sydxehcdw Ajrk 094089 spindle speeds: linka 2100 weight of the machine ca. 600 kg

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. Crjlhcdwou Ngtbs Aek boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Crelhcdwexrgupo Ajk Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Cjlou Nguxehcdw Aerk Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Required space (L x W x H): 630 x 340 x 1150 mm Weight: approx. 80 kg Crolhcjxrguiedw Aok

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm Colheu Ngu Socdw Ajrk currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Cjlhcdsxrgtxjw Aork Good condition

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz revolution per minute: 3000 U/min height over floor: 1000 mm current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank Celhcdwsu Ngxqj Aerk *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm * Crelju Ngvishcdw Ask

Condition: used, Technical details: grinding wheel diameter: 600 mm voltage: 380 V / Hz revolution per minute: 950 U/min total power requirement: 4,8 kW weight: 770 kg dimensions L x W x H: 0,8 x 1,5 x 1,36 m Cslhcdwsu Ngwyo Aerk Double grinding block with sanding supports/handrail, adjustable Sanding discs currently clamped left = Ø 340 x 60 mm and right = Ø 540 x 60 mm Dust extraction Ø 122mm on both sides *