Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Chodpo Agfzbefx Abaod Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Control unit: Siemens Sinumerik 3 Maximum workpiece weight: 20 kgs Table stroke length: 1–650 mm Grinding wheel diameter: max. 350 mm Wheel bore: 127 mm "X" travel 80 mm "Z" travel 650 mm Speed: 1600, 1975, 2000 rpm Power: 12 kW Machine weight: 1900 kgs Machine dimensions (L x W x H): 3400 x 3450 x 2000 mm Accessories and features - Full cnc oeration - Tailstock Cedpfxe Ah Tl Sj Abajhd - Work head - Working lamp - Coolant unit - Intergrated MARPOSS balancing system

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 675149, center height: 175 mm, grinding length: 8,000 mm, center width: 1,000 mm, grinding wheel diameter: 450 mm, total width: 1,700 mm, total length: 3,000 mm, grinding diameter: 349 mm, workpiece weight between centers: 100 g, distance between centers: 1,000 mm, type of input current: three-phase, feed length X-axis: 320 mm, feed length Z-axis: 1,000 mm, overall weight: 3,500 kg, year of last overhaul: 2022, input frequency: 50 Hz, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 800 rpm, Control System Control system manufacturer: FANUC Control system type: FANUC 31i Working area Center height: 175 mm Distance between centers: 1,000 mm Grinding length: approx. 800 mm Max. workpiece diameter: approx. 349 mm Electrical data according to your information Connection voltage: 3400 V Operating voltage: 3400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 20.5 A Main fuse: 25T A Grinding technology according to the documentation Grinding spindle power: 5.0 kW Grinding spindle speed: 800–1,900 rpm Grinding wheels: depending on the design, up to approx. Ø 450 mm X-axis resolution: up to 0.1 µm Cedpfx Ao Ahv T Hebashd Workpiece spindle speed range: approx. 8–800 rpm Automatic indexing: provided in the UR version Further technical data from the manufacturer's documentation Max. ambient temperature: 40 °C Max. humidity: 75 % Sound pressure level: approx. 70 dB(A) Machine weight: approx. 3,500 kg Sold without tools and without additional accessories. The machine is sold exclusively in the described basic configuration. Inspection possible by appointment. Sale ex works Syntegon. Loading and transport are the responsibility of the buyer. Sales / transfer conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Year of construction: 2016, condition: used, A CNC external cylindrical grinding machine, manufactured in 1998 and modernized by GSN Schleiftechnik in 2016, is offered. Grinding length max.: 2000mm. Grinding diameter: 700mm. Distance between centers: 2000mm. Center height: 500mm. Plunge grinding length max.: 125mm. Grinding spindle drive power: 22kW. Control: Siemens SINUMERIK with SIMATIC HMI touch panel and SINUMERIK HT 2 handheld terminal. Equipped with a special clamping fixture for grinding nickel sheets, coolant supply, hydraulic power units and control cabinet cooling. Inspection possible by prior arrangement. Chodo Ah Tybspfx Abaed

Condition: excellent (used), Year of construction: 2018, operating hours: 13,617 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,700 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 640 mm, grinding spindle motor power: 7,000 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Basic TECHNICAL CHARACTERISTICS: Year of manufacturing : 2018 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 3 R2 Colour touch screen: 19 ["] Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght: end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Cedpfx Ao Ah Sycjbajhd Working hours: 13617 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4700 [Kg] ADDITIONAL EQUIPMENT: Calibration ball: automatic calibration of the X, Y and Z axes. RENISHAW LP2 part probe CO2 fire suppression system (to be inspected by a qualified organization at the buyer's expense) LTA oil mist extraction system, model EC 120-X-2-H (year 2023) Paper belt coolant filtration system 3-color signal tower light "ECO LOADER" automatic tool loader with its gripper system x1 pallet – Ø6 mm x1 pallet – Ø8 mm x1 pallet – Ø10 mm x1 pallet – Ø12 mm x1 pallet – Ø16 mm x1 NANN collet holder – Ref. 2.7400.2.003.010 – Collet type 3718 E x1 NANN collet holder – Ref. 2.7400.2.002.010 – Collet type 3409 E x1 SCHAUBLIN collet holder – Ref. 68-5728 – Collet type W20 x1 extended-nose collet, type 3409 E – Ø4.5 mm x1 extended-nose collet, type 3409 E – Ø5 mm x2 extended-nose collets, type 3409 E – Ø6 mm x3 extended-nose collets, type 3409 E – Ø8 mm x1 extended-nose collet, type 3409 E – Ø10 mm x1 extended-nose collet, type 3409 E – Ø12 mm x1 extended-nose collet, type 3409 E – Ø14 mm x1 extended-nose collet, type 3409 E – Ø18 mm x2 extended-nose collets, type 3409 E – Ø20 mm x1 collet, type 3409 E – Ø8 mm x1 collet, type 3409 E – Ø10 mm x2 collets, type 3409 E – Ø12 mm x1 collet, type 3409 E – Ø16 mm x5 drawbars for various types of collets x1 drawbar service wrench x2 ISO50 tool holders x2 sleeves (unidentified references) x1 clamping bell x1 set of "ECO LOADER" grippers for tools with shank diameters from Ø6 to Ø16 mm x1 set of "ECO LOADER" grippers for tools with Ø32 mm shanks x17 grinding wheel arbors (various lengths) x102 spacers for grinding wheel arbors x1 WALTER ISO50 calibration arbor x1 WALTER NCT calibration disc x1 machine parameter backup on USB flash drive x1 WALTER operator's manual (in French) x1 ToolStudio programming manual (in French) x1 WALTER electrical wiring diagrams manual x1 LTA electrical wiring diagrams manual x1 RENISHAW LP2 manual * The collet holder shown in the pictures, as well as the Ø16 mm collet are not included with the machine Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Csdpfj Ah Swtex Abashd Serial number: 2368 Manufacturer: IFS Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Rated current: 220 A Required fuse rating: 250 A Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: used, Year of construction: 1974, mechanical ja Csdpfxey Ty Rpo Abajhd centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, overall weight: 3,700 kg, Equipment: documentation/manual, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Cjdpfx Ae Afb Eysbashd

Condition: ready for operation (used), functionality: fully functional, total height: 1,300 mm, total width: 2,500 mm, total length: 3,500 mm, overall weight: 6,500 kg, LIDKÖPING 4B – Centerless cylindrical grinding machine For sale is a used centerless cylindrical grinding machine from the Swedish manufacturer LIDKÖPING, model 4B. The machine is designed for centerless external cylindrical grinding of rotationally symmetrical workpieces and features a grinding wheel and regulating wheel drive, as well as hydraulic adjustment devices. Technical data: - Manufacturer: LIDKÖPING, Sweden - Model: 4B - Machine type: Centerless cylindrical grinding machine - Power connection: Three-phase, 50 Hz - Grinding wheel diameter: approx. 508 mm - Grinding wheel width: 254 or 305 mm - Grinding wheel drive: 37 kW Codo Ah Si Ujpfx Abajhd - Regulating wheel drive: 4 kW - Hydraulic drive: 2.2 kW - Machine weight: approx. 6,500 kg - Machine dimensions: approx. 3,500 × 2,500 × 1,300 mm - Separate hydraulic unit - Workpiece feeding/transport device - SKF lubrication unit - Adjustment handwheels for the machine axes - Grinding area with protective covers - Additional control cabinet Condition: Used industrial machine with signs of wear and tear, paint chipping, and visible corrosion spots due to age and use.

Condition: good (used), Year of construction: 1982, total height: 2,000 mm, total length: 2,000 mm, total width: 1,800 mm, input frequency: 50 Hz, input voltage: 380 V, Equipment: rotational speed infinitely variable, We are offering a well-maintained Strausak 57U tool grinding machine, manufactured in 1982. Manufacturer: Strausak AG, Machine Factory Machine type: 57U Machine category: Tool grinding machine Year of manufacture: 1982 Factory number: 10338 Order number: 39741 Voltage: 380 V Frequency: 50 Hz Country of origin: Switzerland Chedpfo Ahrdxox Abajd It is a universal grinding machine with hydraulic table drive and three grinding wheel holders (circumferential, pot, internal). We have upgraded the grinding wheel drive to a Poly-V belt system and equipped it with a frequency converter (two presets can be selected on the control panel!). In our operation, the machine was configured as a cylindrical grinding machine. The spindle head is driven, with five speed levels selectable via belts, and a MK5 collet chuck. Included in the delivery: 3-jaw chuck, 4-jaw chuck, reduction sleeves MK5/MK4, MK5/MK3, MK5/MK2, as well as collet adapter with collets 3, 4, 6, 8, 8.5, 10, 12, 14, 16, 18, 20, 25mm Also included are a few more grinding wheel holders and grinding wheels. The machine worked precisely and reliably until the very end. It is being sold only due to the closure of our business. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, total height: 2,200 mm, total width: 1,600 mm, total length: 3,700 mm, type of input current: three-phase, overall weight: 12,000 kg, input voltage: 480 V, input frequency: 60 Hz, grinding spindle motor power: 22,000 W, space requirement height: 2,200 mm, spindle speed (max.): 2,406 rpm, Very Low Hours, Hardly Ever Used- Specifications: Workpiece diameter: max. 100 mm (3.94") Workpiece diameter: min. 2 mm (.08") Workpiece length with plunge grinding: max. 195 mm (7.68") Grinding wheel diameter: max. 500 mm (19.69") Grinding wheel diameter: min. 380 mm (14.96") Maximum wear of the grinding wheel - Straight plunge cut: 60 mm in radius (2.36") - Inclined plunge cut: 25 mm in radius (0.98") Width: max. 200 mm (7.87") Bore: 305 mm (12") Circumferential speed of the Grinding wheel standard: max. 63 m/s Regulating wheel diameter: max. 300 mm (11.81") Width: max. 200 mm (7.87") Bore: 203 mm (7.99")Grinding wheel drive power standard: 22 kW Cjdpfx Abo Agptyeaehd Unit: Metric - Provision of the grinding wheel and regulating wheel unit: X1/X2 axis - Infeed axis of the grinding wheel dressing tool: Z1 axis - Longitudinal feed of the regulating wheel dresser: W2 axis - Speed control of the grinding wheels: SP1 spindle - Speed control of the regulating wheel: SP2 spindle 3 operating modes: - Set-up - Grinding in single operating mode (only with plunge grinding) - Automatic grinding - cycle operating mode Noise emission at the machine: Automatic loading - Basic machine: approx. 12,000 kg (approx. 26,455 lbs.) - Dimensions of the basic machine (without control cabinet) Length: 3,700 mm (146") Width: 1,600 mm (63") Height: 2,200 mm (87") Equipped with: Grinding Wheel Balancing System, Regulating Spindle Swivelling, Height Adjustment of Work Rest Holder-NC axes, Auxiliary for Grinding Wheel Exchange, Second Operating Panel, Loading Unit, Loading System for Manual Loading, Unloading System with Integrated Measuring Unit, Workpiece Dependent Accessories, Compact Filter Unit

Condition: used, machine/vehicle number: 200070, functionality: fully functional, grinding belt width: 150 mm, grinding belt length: 2,000 mm, actuation type: electric, MULTI-TOOL (Scantool) Industrial Belt Sander – 150 x 2000 mm – Heavy-Duty – Includes 34 New Belts! Description: Robust, professional belt sander for industrial use! For sale is a solid metal belt sander from the Danish premium manufacturer Multi-Tool A/S (identical to Scantool, technically closely related to GRIT/FEIN). This is the sought-after, wide 150 mm version from the robust 200070 series. Due to its heavy steel and cast construction (Industrial Heavy-Duty), the machine runs with low vibrations and offers good stability when processing heavy components. _____ ABSOLUTE HIGHLIGHT: Large belt sanding package included! With the purchase, 34 high-quality, like-new sanding belts in the 150 x 2000 mm format, worth several hundred euros, are included. Perfectly divided for rough and fine sanding: • 17x sanding belts in grit P40 (roughing / deburring): 8x red, 9x green • 17x sanding belts in grit P80 (intermediate and fine sanding): 8x red, 9x green _____ Technical Data & Details: Codpfx Ao Ah Emtjbaohd • Manufacturer: Multi-Tool A/S (Made in Denmark) • Model Series / Type: 200070 series (for 2000 mm belt length) • Belt Sander Dimensions: 150 x 2000 mm (standard size) • Estimated Year of Manufacture: approx. 1980s / 1990s • Spare Parts Availability: generally available through specialized dealers (including GRIT by FEIN / Scantool). • Application Area: Ideal for locksmiths, metal construction, and industrial workshops for steel and stainless steel processing. Condition: The machine is in a good, operational condition. It runs powerfully, and the belt centering system functions properly. The machine can be tested on-site while powered. • The price is ex works (EXW). • Dismantling, proper loading, and transportation must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications are based on available documentation. Subject to prior sale.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sanding machine, equipped for wet sanding, with 2 top-mounted sanding units and one brush unit (Scotch-Brite). The machine is used for surface finishing of metal parts with a width of up to 450 mm. The dust collection container with filter fabric is located at the bottom. Cjdpfjyn E H Rex Abaohd Technical drawings, operating manual, and the CE declaration are available. The machine will be delivered in good, partially refurbished condition. Further technical information can be found in the document.

Condition: used, Year of construction: 1987, functionality: fully functional, Surface grinding machine Manufacturer: Geibel & Hotz, Model: FS 40 Primus Year of manufacture: 1987 Technical data Manufacturer: Geibel & Hotz Model: FS 40 Primus Year of manufacture: 1987 Grinding area (L x W): 400 x 200 mm Table width: 600 mm Max. workpiece weight: 150 kg Magnetic chuck: 400 x 200 mm Chjdpfx As Ahif Tjbaod Longitudinal travel (X-axis): max. 420 mm Transverse travel (Z-axis): 205 mm Table speed: stepless, hydraulically adjustable Grinding wheel dimensions: Ø 225 x 25 x 51 mm Voltage: 3 x 380 V / 50 Hz Dimensions: approx. 1.50 x 1.30 x 2.20 m Weight: approx. 1,200 kg Equipment - Automatic transverse feed (Z-axis) - Rapid traverse for the vertical axis (Y-axis), combined with fine adjustment via handwheel - Central lubrication - Operating manual All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection 380V Dimension L (Length) 3200mm Chodpfx Aozfwl Sobaed Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 108080272, See pictures Cedpfe Agu S Eox Abaohd

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: rotational speed infinitely variable, Tool grinding machine Manufacturer: DECKEL, Type: S 11 Year of manufacture: 1991 Technical details Manufacturer: DECKEL Type: S11 Year of manufacture: 1991 Clamping area: 500 x 180 mm Max. tool diameter: between centers 130 mm, with overhanging clamping 620 mm Max. tool length: between centers 270 mm Grinding stroke: 190 mm longitudinal Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Spindle speed: 2,000 to 10,000 rpm, continuously adjustable Drive power of the grinding motor: 1.1 kW Total power consumption: approx. 2.2 kW Connection voltage: 400 V / 50 Hz Max. grinding wheel diameter: 125 mm Workpiece spindle mounting: SK 40 T-slots: 12 mm on the machine frame Machine weight: approx. 850 kg Dimensions: L 1.60 x W 1.10 x H 1.60 m Chjds Afyq Iepfx Abajd Equipment • 5-axis adjustability • Motorized height adjustment of the grinding head • Opto-electronic measuring system with 2-axis digital display • Very large range of accessories as shown in the photos • Technical documentation All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 88-009-01, overall weight: 600 kg, Grinding machine by Jungner, model US-350, including cabinet with accessories – see images. Chedpfxo Afnd Ae Abaod

Condition: used, Year of construction: 2026, functionality: fully functional, machine/vehicle number: F177A006, total height: 2,000 mm, total length: 2,000 mm, total width: 1,800 mm, grinding spindle motor power: 4,000 W, power: 4 kW (5.44 HP), We are offering this used Falcon FSG-1224AD surface grinder for sale. (Year of manufacture unknown. We acquired it used in 2017.) Automatic crossfeed (Y) and automatic infeed (Z) Grinding wheel 350x50x127mm (one mounted, one new one included) Includes coolant tank with band filter Wiring diagram is available, plus a self-made quick-start guide. Manufacturer: Falcon Model: FSG-1224AD Machine type: Surface grinder Codpfx Ae Ahq Sxebaohd Serial number: F177A006 This machine was used infrequently in our facility but functioned perfectly until the end, and we are only selling it because we are closing our business. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1968, functionality: fully functional, 450 mm Länge Chodpeqwpwzofx Abaod x-travel 500 mm workpiece height . mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, total width: 3,560 mm, total length: 3,300 mm, total height: 2,210 mm, overall weight: 5,000 kg, TSCHUDIN HTG 52 CNC – CNC External Cylindrical Grinding Machine CNC-controlled external cylindrical grinding machine from the Swiss manufacturer TSCHUDIN, based in Grenchen. The machine is equipped with a Marposs E14 CNC control, a Marposs E38 measuring and monitoring unit, and a Heldt & Rossi servo drive control. The equipment includes an external cylindrical grinding spindle, a workpiece spindle, a tailstock, and a coolant supply. The machine has various clamping and holding devices, as well as a separate control cabinet. Technical data: Csdpfx Abo Ahyxisaohd - Manufacturer: TSCHUDIN, Grenchen (Switzerland) - Model: HTG 52 CNC - Type designation: 365 - Machine type: CNC external cylindrical grinding machine - CNC control: Marposs E14 - Measuring and monitoring unit: Marposs E38 - Servo drive control: Heldt & Rossi SM 807 DC - Grinding wheel diameter: 500 mm (identification of the installed wheel) - Mains connection: 3 × 380 V - Frequency: 50 Hz - Current consumption: 19.7 A - Power rating according to the nameplate: 13 kW Equipment: - CNC control Marposs E14 - Marposs E38 measuring and monitoring unit - Heldt & Rossi servo drive control - External cylindrical grinding spindle with grinding wheel - Workpiece spindle - Tailstock - Measuring device in the work area - Coolant supply - Clamping and holding devices - Separate control cabinet - Bellows covers - Operating and adjustment devices Note: The information is based on the available nameplates and the visible machine components. Year of manufacture, center distance, center height, travel distances, machine weight, and functional condition are not confirmed. Subject to errors, changes, and prior sale.

Condition: good (used), functionality: fully functional, Net price: €6,800 Internal article number: 26096 Universal tool grinding machine Deckel S11 Includes dividing head (without Deckel brand dividing head) Includes documentation (electrical circuit diagram, operating manual, parts list) The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which has over 500 m² of space. Chjdpfx Ao Ahhl Nobajd

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Chjdpfx As Ahq Sbsbajd Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: good (used), Year of construction: 1981, functionality: fully functional, overall weight: 2,200 kg, Machine in good condition. Codpfx Aj Afp R Dobaehd Magnetic clamping plate, 600x200. 1 flange. Can be tested while powered on.

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Chsdsu Ef Dqjpfx Abajd Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg