Used eccentric presses single column over 100t for sale (131)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ Lhedpfx Aotqwtdoiijh PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: new, pressure: 100 toStroke/min: 50table clamping area: 900 x 700tappet measurements: 500 x 350Stroke adjustment: 20 - 130Tappet adjustment: 100daylight: 400EEP-PK100 ECCENTRIC PRESS- Pneumatic coupling & brake combination - Hydraulic overload protection ( ¤2,800 due to the large working area, it is recommended )  - Capacity: 100 tons   - stroke/min. : 50 spm  - Table: 900 x 700 mm  - Pestle: 500 x 350 mm  - Stroke adjustment: 20 – 130 mm  - Plunger adjustment: 100 mm  - Installation height: 400 mm Accesories : - Stroke adjustment  - Min/stroke setting  - Automatic central lubrication  - Security PLC: PILZ or SIEMENS  - Two-channel fuse control cabinet  - Light barrier: SICK, PILZ or LEUZE,  - Cat 4. CE. system  Lhedpfov Hin Ejx Aiijh - 2 pieces. Fracture plates  - Bottom support plate for transport  - Underreach protection

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS Ljdpfxodzqddo Aiiohh - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: good (used), Year of construction: 1983, Rotary indexing table with 12 stations Automatic ejector Three pressing stages Pressing force: 1,000 kN Stroke: 12-120 mm Lhjdpfslp Nqhox Aiijh Stroke rate: 30-60 strokes/min Ram adjustment: 80 mm Total weight: 9,500 kg

Condition: good (used), Year of construction: 1988, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, pressing force: 160 t, total length: 2,310 mm, total width: 1,270 mm, total height: 2,590 mm, overall weight: 10,150 kg, year of last overhaul: 2023, For sale: Used ZTS LE 160 C eccentric press, year of manufacture 1988. The machine is in good technical condition, except for the paint coating. All control solenoid valves were replaced in February 2023. The machine has been seldom used for a long period and has been in our possession for 20 years. Machine number: 2291286 Machine type: LE 160 C Year of manufacture: 1988 Maximum pressing force: 1600 kN Power: 11 kW Voltage: 400 V Weight: 10,150 kg Total length: 2310 mm Total width: 1270 mm Total height: 2590 mm Lhjdpfxex Rcgze Aiioh If you have any questions or need further information, please send a message or contact us by phone.

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). Lhjdpfx Ajt Ucpboiijh One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Year of construction: 1984, condition: used, pressure 100 t Lsdpfxjqwpv Sj Aiiohh throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm table height 820 mm tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Year of construction: 1975, condition: used, pressure 125 t Ljdpfxelp U Dho Aiiehh throat 400 mm stroke 6-125 mm ram - range of adjustment 100 mm dayligth 400 mm table surface area 1100x750 mm no. of strokes 60 Hub/min ram surface 800x550 mm hole in the table Ø 150 mm total power requirement 14 kW weight of the machine ca. 9,0 t dimensions of the machine ca. BxTxH 1500x2200x3500 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm Lsdpfx Aislp U D Esijhh ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm Lsdpfxst Eix Rj Aiiohh table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm table surface area 1050 x 750 mm no. of strokes 42 u. 62 Hub/min ram surface 800 x 500 mm tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm Lhodpfx Aiecyc Adsijh daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t Lodpoxh Swhjfx Aiiohh dimensions of the machine ca. 2100x1500x3300 m

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm Ljdpfx Aetu Hvwjiishh incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: refurbished (used), pressure 100 t throat 350 mm stroke 20 - 120 mm table size 1100 x 700 mm ram head dimension 750 x 450 mm ram adjustment max. 90 mm Ledpetv N Ibjfx Aiishh no. of strokes 70 Hub/min strokes - infinitely variable 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above 500 mm hole in the table 400 x 300 mm hole in bolster plate 220 x 180 mm Breakthrough in column back 450 x 300 mm total power requirement 11 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 2,1 x 1,3 x 2,8 m

Year of construction: 1958, condition: used, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm Lhjdpfx Aslp U Ebjiioh ram surface 500x400 mm hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t dimensions of the machine ca. 2200x2000x3600 mm

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm stroke 8-140 mm no. of strokes 48 Hub/min ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm Lhedpfjlp U Spjx Aiioh tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Condition: used, Year of construction: 1987, pressure 100 t throat 300 mm stroke 10-140 mm no. of strokes 60 Hub/min ram - range of adjustment 60 mm table surface area 800x500 mm ram surface 430x230 mm Lhodpfx Aiew E Nunjish hole in the table Ø150 mm table height 860 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,2 t

Condition: used, Year of construction: 1981, machine/vehicle number: 2648481, functionality: unexamined, stroke length: 120 mm, table width: 520 mm, table height: 810 mm, total length: 1,200 mm, total width: 1,100 mm, overall weight: 1,375 kg, year of last overhaul: 2023, control cabinet height: 935 mm, control cabinet length: 900 mm, control cabinet width: 450 mm, DGUV inspection last carried out in 2022 (next inspection due 4/2023). Hydraulic system is leaking. Control cabinet separate. Self-collection only, loading at buyer's expense. No warranty. Please call if interested! Ledpfx Aieyaq Uweiohh

Condition: good (used), Year of construction: 2002, functionality: fully functional, power: 12 kW (16.32 HP), pressing force: 120 t, table width: 610 mm, table length: 850 mm, total length: 19,000 mm, total width: 19,000 mm, overall weight: 8,500 kg, installation height: 300 mm, to visit under power Lhsdpfx Aiorwlxtoijh

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm Lhjdpfxjlp U Rvs Aiioh ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm table surface area 830x600 mm ram surface 250x130 mm Lodpfslp U Stjx Aiiehh table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm Lodpfsxh Sw Uex Aiishh stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: good (used), Year of construction: 2001, Table 950x650 mm, ram 610x410 mm, stroke 0-140 mm Lhjdpfx Aisqgcaasieh

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm Ledep Apxhepfx Aiiohh table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Year of construction: 1986, condition: used, pressure 100 t throat 340 mm stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm Ledpfsp Syczsx Aiiohh table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm