Used Eccentric Press Schnegg for sale (12,812)

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, functionality: unexamined, power: 75 kW (101.97 HP), Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Lsdpfx Aszvcgpsmashk Supply voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J Max. strokes in continuous operation: 20-80 strokes/min Max. strokes in single-stroke operation: 30 strokes/min Max. clutch cycles in single-stroke operation per minute: 20 Post-travel time: 0.20 sec Min. safety distance: 322 mm Min./max. clutch pressure: 5.5/6.0 bar System pressure: 6.0 bar Stroke lengths: 40-315 mm Maximum ram adjustment: 200 mm Standard connection point of the ram: OU Max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1400 mm Max. tool dimensions: 3000 x 1300 mm Max. weight of tool upper part: 2,800 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Serial No. M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, Serial No. M 2018-01119, Year of manufacture 2019 Including hydraulic unit, enclosure, and roller conveyor GSW project no.: 2018-60420 with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, Year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N, Set of 2, Year of manufacture 2019 - Control cabinet Function and technical data have not been verified. Without further items/without further accessories, unless explicitly specified as part of the item. If interested, please contact us by email.

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Lodpfx Amszvdm Rjaehk Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: used, Year of construction: 1998, machine/vehicle number: SN: 5-2067, functionality: unexamined, power: 45 kW (61.18 HP), pressing force: 255 t, overall weight: 24,800 kg, PME Erfurt, Type: ZH 2500 / 1600, Serial No.: 5-2067, Year: 1998, 2500 kN, in operation until December 2025 Technical data of the press according to the nameplate: Press force: 2,500 kN Stroke rate: 25-75 strokes/min Rated stroke rate: 40 strokes/min Stroke: 20-200 mm Ram adjustment: 140 mm Total power: 45 kW Lsdozvcxljpfx Amaohk Operating voltage: 400 V Frequency: 50 Hz Machine weight: 24,800 kg Strip feeding system consisting of: PBK, Type: Roller feeder WV-120/DSM 500P, Serial No.: BA00482, Year: 1998, PBK, Type: Straightening machine, Year: unknown, PBK, Type: Unwinding reel SCi 530 M, Serial No.: BA00482, Year: 1998 including enclosure and roller conveyor with peripherals: - Conveyor system Functionality and technical data have not been verified. without additional items/without further accessories, unless explicitly stated as part of the item. If interested, please contact us by email.

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Lhsdpfx Ajx Dkfpjmaok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Lhedpfx Amotq Eqxoajk

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Lhsdpfxeykbcms Amaek Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Lsdpfx Amjyn Rhyjaohk Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 200 V, pressing force: 80 t, stroke length: 100 mm, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm Lhedpeu E U Nijfx Amaek number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm Lhsdpfxstzwt Uj Amask - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 45 t, table width: 810 mm, table height: 360 mm, Manufacturer: AIDA Type: NC1-45 Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm Ljdpfxsu Dkc Ao Amashk

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Lhsdjv Tp D Hspfx Amaok Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm Ljdstzxdzspfx Amajhk - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min Lhsdpfju Hav Rsx Amajk table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar Lhjdju Hautjpfx Amaok stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: ready for operation (used), GIZELIS ECCENTRIC PRESS 25 TONS IN VERY GOOD WORKING CONDITION Ledpfx Aszupqfjmaehk "Your Next Reliable Production Machine Starts Here"

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Press force: 63 tons Press dimensions L x W x H: 1800 x 1300 x 2500 mm Press weight: approximately 4500 kg Table dimensions L x W: 700 x 550 mm Table opening L x W: 265 x 265 mm Ram L x W: 320 x 300 mm Pusher stroke: 135 mm (fixed) Ledpfx Aew R Tl Tomajhk Maximum distance of the ram from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999 seconds and the number of repetitions 1-32000) A special function for determining the lower position of the ram Automatic machine lubrication Pneumatic activation and braking. Note: Two identical presses are offered (the only difference is in the size of the display: 7" and 4.3"). Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. Shipping costs are additional. Urgent sale, due to a change in business, the presses are no longer needed for production, and I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the power supply.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Lhedpeu Rwa Iofx Amaok Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Russian manufacturing, Lhsdpfx Ajxbf Sfjmaok Max. pressing force: 25 t Table size: 550 x 400 mm

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 1,100 kg, 40 ton eccentric press MIOS, type C Lhedpoywylhjfx Amajk

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent Lodpfstx E Rqsx Amaehk - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Year of construction: 2001, machine/vehicle number: 6000110, functionality: fully functional, pressing force: 60 t, overall weight: 3,850 kg, Equipment: documentation/manual, Dirinler eccentric press in good condition, last commissioned in 2024. Ljdpewhbxqefx Amajhk Lower hold-down clamp. Problem with front safety barrier.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Ljdpfxsyath Ts Amaohk Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 60 t, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, year of last overhaul: 2021, compressed air connection: 5 bar, ram adjustment: 90 mm, warranty duration: 5 months, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t Lsdpsu Haqhofx Amajhk two-handed operation central fattening stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Lsdpezvy Haefx Amashk

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: - Pressure force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T Ljdsvmx N Espfx Amashk