Used Eccentric Press 1200 Ton for sale (21,725)

Condition: good (used), Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm Fgjdpjzytmbofx Akyeh -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Condition: good (used), Year of construction: 1989, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: EBU, Single-column eccentric press type EBU H100F -Pressure capacity: 100 tons -Clutch: hydraulic -Drive: 4.5/6.9 kW 1440/2890 rpm -Stroke rate: 66/100 rpm -Stroke: adjustable 20-140 mm -Pushrod adjustment: 100 mm -Table size: 890 x 620 mm -Table cutout: Ø 290 mm -Protrusion: 320 mm -Punch holder: Ø 50 mm -Insertion height: 480 mm Fodoz Hyvgepfx Akyegh -Dimensions: 1500/2200/H2770 mm -Weight: 6500 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm Fgsdpfxju Hauts Akyjh bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Ram size 300 x 280 mm Table size 500 x 800 mm Fodpjtt A T Tefx Akyjgh Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Fgedoz Irbqjpfx Akyeh Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press Fodoi Agynopfx Akysgh -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: good (used), pressing force: 80 t, throat depth: 400 mm, ram adjustment: 80 mm, Capacity: 80 Ton Table surface: 750 x 550 mm Fedpfxougtkxs Akyjgh Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: used, Machine package loaded into a 40-foot open-top container Fgodpfx Ajx Sxfpokyeh . Eccentric press MÜLLER 100 T . Eccentric press EBU 75 T

Year of construction: 2020, condition: excellent (used), We offer an eccentric press, Sangiacomo T50 RCE. Fully functional, in very good condition, can be tested, we will arrange loading, more information by phone. Includes documentation. Pressing force: 50 tons Type: mechanical eccentric (C-frame) Work table: approx. 750 × 440 mm Fedpfx Aksz I Uk Ueysgh Stroke: 12–110 mm Number of strokes: approx. 40–100 / min (depending on the mode) Drive: flywheel (eccentric) Motor power: approx. 3 kW Weight: approx. 3,400 kg Mechanical press Sangiacomo T50 RCE, manufactured in 2020, high precision, suitable for cutting and forming sheet metal. Robust construction, continuously adjustable stroke and high productivity.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights Fgjdpez It Dmsfx Akyeh 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Fgodpezbvvvjfx Akysh Machine weight: 3700 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, stroke length: 65 mm, table width: 450 mm, table length: 320 mm, ram plate width: 280 mm, ram plate length: 180 mm, total length: 1,145 mm, total width: 970 mm, total height: 1,930 mm, overall weight: 1,250 kg, Equipment: documentation/manual, Excentric Press LEN 10C. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 Tons, - Number of ram strokes in continuous operation: 80 or 160 /min, - Number of single strokes: 45/min and 60/min. - Adjustable ram stroke: 6–65 mm, - Adjustment range between table and ram: 45 mm, - Throat depth: 160 mm, - Distance between table and ram: 225 mm, - Table size: 450 x 320 mm, - Ram size: 280 x 180 mm, - Overall dimensions (length x width x height): 1145 x 970 x 1930 mm, - Pneumatic clutch (min. compressed air pressure: 0.4 MPa), Fsdpey Ry Tfofx Akyegh - Motor power: 1.1/1.5 kW, - Press weight: 1250 kg.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik Fedpfxev Tp D He Akyjgh - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Fodstq Eqxepfx Akyegh

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of one bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features large loading opening for cardboard option for automatic feeding (e.g., with a conveyor) manual wire tying (4 wires) pallet lock and hydraulic door for bale removal Fsdpfx Akjra Dddsysgh Advantages of this press large bales – fewer transports high crushing force designed for continuous operation Available model years: 2017-2020

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition Fgsdpfjz Alg Ssx Akyoh

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Fjdpfx Akoykbcmoysgh Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1977, functionality: unexamined, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Fsdpfx Ajzv Skdjkysgh Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm Fjdpfx Astzxdzokyjgh - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: good (used), functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, OPEN 16T ECCENTRIC PRESS – THE MACHINE HAS MINOR DAMAGE AS SHOWN IN THE PHOTOS: THE ELECTRICAL CONTROL CABINET AND THE OIL DRIP TRAY ARE DENTED. Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min Fedpfx Aezp I Tzjkysgh • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Used machine in good condition • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Press force: 63 tons Fjdpfjw R Tl Tox Akyjgh Press dimensions L x W x H: 1800 x 1300 x 2500 mm Press weight: approximately 4500 kg Table dimensions L x W: 700 x 550 mm Table opening L x W: 265 x 265 mm Ram L x W: 320 x 300 mm Pusher stroke: 135 mm (fixed) Maximum distance of the ram from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999 seconds and the number of repetitions 1-32000) A special function for determining the lower position of the ram Automatic machine lubrication Pneumatic activation and braking. Note: Two identical presses are offered (the only difference is in the size of the display: 7" and 4.3"). Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. Shipping costs are additional. Urgent sale, due to a change in business, the presses are no longer needed for production, and I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the power supply.

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg Fedoywzh Ropfx Akyjgh

Condition: good (used), Year of construction: 1985, functionality: unexamined, power: 1.5 kW (2.04 HP), overall weight: 1,700 kg, Eccentric press EBU H25 Year of manufacture: 1985 Location: Bad Tölz Inspection is welcome. Fgodpfxezv Sits Akyjh We have other used machines available. Please feel free to contact us.

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Fodpfx Ajv Uraajkyogh Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Fodpfx Ajx U Eiaskyegh Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons