Used Wmw for sale (460)

Condition: used, total length: 5,400 mm, total width: 2,600 mm, total height: 2,550 mm, Empty weight: 15.000 kg Price: On request - Drive system: Conventional - Power [kW]: 55.0 - Centre height [mm]: 1000 - Swing over bed [mm]: 2000 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 100 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 224 - Max. workpiece weight [kg]: 12500 - Options: Digital readout - Type of digital readout: Acu-Rite 3-A - Documentation available: No - Serial number: 261 511 706 - Transport dimensions: 5400mm x 2600mm x 2550mm (l x w x h) - Transport weight [kg]: 15000kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT Nwjdpfxow Rfngj Af Esn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t Nwjdpfx Aferxg S To Een

Condition: good (used), Year of construction: 1976, number of straightening rollers: 11, working width: 2,500 mm, sheet thickness (max.): 16 mm, overall weight: 46,000 kg, max. sheet width / max. sheet width: 2500 mm max. sheet thickness / max. sheet thickness (St 50): 16 mm min. sheet thickness Blechdicke / min. sheet thickness: 6 mm Anzahl der Richtwalzen /number of straightening rollers: 11 Walzen / rollers Richtwalzendurchmesser/diameter ofstraightening rollers: 180 mm Richtgeschwindigkeit / speed of straightening: 10 - 16 - 20 m / min Throughput speed: 10 m/min Hauptantriebsmotor / power of main motor: 75 kW Nwedpexrthiefx Af Eon Gewicht der Maschine / weight of the machine: 46 t

Condition: used, Technical details: Nodpfx Afoval Nrs Eewn width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Year of construction: 1990, x-travel 1600 mm ja weight of the machine ca. 13,7 t Njdswlvtdopfx Af Eewn

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min Nodpfxjvbh N Ro Af Eewn cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Technical details: weight max.: 7,0 t Dimensions (LxWxH): 3,4 x 0,12 x 0,51 m The lifting beam is sold without crane hooks. Type: T-beam, welded sheet steel Njdpfsu Nvm Rjx Af Ejwn Lifting eye Ø 80 x 130mm Load-bearing eyelets Ø 45 x 3050mm (center stand) As stated without UVV. (Accident Prevention Rules) *

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished * Nwjdpfewb D H Dsx Af Ejn

Condition: used, Technical details: diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key Nwodevgbhqjpfx Af Eon *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg Nsdpfowid Uwjx Af Eown for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: Nwjdpou N Ay Rsfx Af Ejn throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Nwodpfxju N E Abo Af Esn *

Condition: used, Technical details: Nwedpfxeu N E Eie Af Ejn faceplate diameter: 1000 mm width: Grundkörper: 150 mm boring diameter: Ø 130 mm weight: 475 kg dimensions: Ø 1000 x 2500 mm Equipment: -4x external/internal jaws; clamping range min./max.: approx. Ø 320mm / max.: approx. Ø 900mm; clamping stroke approx. 200mm -Clamping slots according to DIN 650: a=22mm; h=43mm; b=38mm; c=15mm x length 300mm Flange mounting: -Ø inside: 195mm x 21mm -clamping bore Ø 20mm; counterbore Ø 30x31mm; pitch circle Ø 235mm *

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg Nodeu S Hywspfx Af Eewn T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm *

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! Nwedpow Th Nlefx Af Een *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm Nwedpfxou N Dg Sj Af Eon *

Condition: used, Technical details: floor-plate length: 4750 mm plate width: 1850 mm plate height: 200 mm weight of the machine ca.: 4785 kg steel plate are available for sale. T-slots according to DIN 650 Nwodpfx Afsu N Dq Rj Eon a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm *

Condition: used, Technical details: Length: 600 mm width: 300 mm dimensions L x W x H: siehe Beschreibung m Nwodpeu N Dxzjfx Af Eon Spotting measuring plates No. 3 size 200 x 200mm with small quadrants No. 4 size 200 x 200mm No. 5: size 580 x 285mm No. 6: size 300 x 300mm No. 7: size 160 x 160mm No. 8: size 600 x 250mm No. 10: size 400 x 280mm No. 11: size 400 x 255mm with 24 kg *

Condition: used, Technical details: floor-plate length: 510 mm Nsdpfx Asu N D Dwsf Eswn plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 205 mm Nsdsu N D H Eepfx Af Eewn plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm *

Condition: used, Technical details: width: 655 mm depth: 500 mm height: 500 mm weight of the machine ca.: 197 kg dimension L-W-H: 420 x 655 x 500 mm model: angular frame with double stiffness vertical plate: - size W: 655 x H 500 x thickness: 40mm - with clamping holes, long holes and center hole foot plate: - size: B:655 x L:420 x thickness : 40mm - with long holes * Nwjdsu N D Snepfx Af Esn

Condition: used, Technical details: width: 700 mm Nsdpfx Afsu N Eats Eswn depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Nwodou Iwwzspfx Af Esn Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. *

Condition: used, Technical details: Njdpfsu Ng Ifex Af Eewn grinding length: 450 mm centre height over plate: 120 mm grinding width: 200 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li ° grinding head adjustable: vertical: 250 mm adjustment of spindle-head: quer/transversal 230 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: B x L: 120 x 950 mm table movement: quer: 220 mm table movement: längs/longitudinal=500mm mm table adjustment: 5° / 45° rechts / links ° dimensions of grinding wheel: Ø 120x15 mm dimensions of hydaulic: 0,6x0,5x0,9 mm total power requirement: 1,8 kW weight of the machine ca.: 1,2 t dimension machine xH: 1,6 x 1,2 x 1,6 m dimensions of hydaulic: 600 x 550 x 820 mm The tool grinding machine is currently re-equipped as a surface grinding machine. with Orsta hydraulic power unit with dust extraction and various accessories i.D. *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available Nedpfx Afou Ng Nco Ejwn *