Used C Frame for sale (17,138)

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil Hjdjv Tp D Topfx Ah Nsng - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 3,600 mm, table height: 850 mm, installation height: 500 mm, total width: 1,200 mm, total length: 1,500 mm, throat depth: 250 mm, pressing force: 50 t, table width: 800 mm, table length: 500 mm, overall weight: 4,400 kg, Hydraulic C-frame press, capacity 50 to, table size 800x500 mm, stroke 500 mm, motor 22 kw, dimension 1200x1500x3600 mm, weight ca. 4500 kgs; 2-hand-operation, light-barrier-security Hnjdpfot Ri A Tox Ah Njg

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton Hedpfjw Tukiex Ah Nsng

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Hnedjflc T Sopfx Ah Neg Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: good (used), C-frame press Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Weight: 3000 kg Stroke up and down adjustable via limit switches Hedpsx A Tygefx Ah Njng Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm Hjdpfx Asx Aqtqeh Neng - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Hsdpfx Aoktm N Dsh Nsng

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Hedpfxehhil Ts Ah Nsng Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Hjdpfjuqdwxjx Ah Nong Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Hedpfx Asd Rg Dpsh Nong Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale Hnsdpfoig Hzkjx Ah Njg The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Hnsdpfx Ahodzqdds Nsg Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Hjdpfetqwtdox Ah Neng Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Hjdpfx Ahowyplcj Nong Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Hedpfx Ael Hycwsh Njng Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Stroke 700 Hnjdpsg S Uc Dsfx Ah Njg Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing Hnedpek S Htxsfx Ah Neg - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Hjdpsuqcxnefx Ah Neng Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hjdpfxehrakvs Ah Neng Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Hnodpfxouqc Ene Ah Nog Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Hedpfsv Uraaox Ah Neng Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Hnsdpfsuqc Hfox Ah Nog Extended machine accessories Press body can be tilt

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm Hnjdpfx Ahsh Uhqys Njg clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Hodpfxsvai R Tj Ah Neng Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Hsdjh U Dtuspfx Ah Neng Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition