Used Manual Screw Press for sale (29,069)

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Fpsdpfjzdat Rsx Ad Iei Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Fpsdpfx Aev Td Ered Ioi

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Fjdpfx Adezixq Ds Ispi Drive motor 55 kw

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced. Technical data available on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust hand spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the typical technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the frame size/frame width, and the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle fully raised) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Design: Solid cast iron stand in a C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel as it is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool mounting. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolts to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Fodpfewxyn Eex Ad Ijpi Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the position of the spindle). Width (stand): approx. 500 – 600 mm. Depth (base): approx. 800 – 1,000 mm.

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm Fodoigwdwopfx Ad Ispi -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Fjdpfezgtz Sjx Ad Iopi Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops.

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] Fodjuhalljpfx Ad Iepi - Spindle height : 400 [mm] - Slide bore diameter : ø 10H7 [mm] - Angle : 95 [°] - Max. tool weight : 15/30 [N] - Table dimension : 110 x 80 [mm]

Condition: used, TECHNICAL DETAILS Fodeuhalfepfx Ad Ispi - As per photos

Condition: used, TECHNICAL DETAILS Same as on photos Fjdpsuhaiqsfx Ad Ijpi

Condition: used, TECHNICAL DETAILS Fpodpfx Ajuhaiwod Isi Same as on photos

Condition: used, TECHNICAL DETAILS Fpodpouhaidjfx Ad Ioi Same as on photos

Condition: used, TECHNICAL DETAILS Fpedpfeuhaikex Ad Iji Same as on photos

Condition: good (used), Hand-operated spindle press, homemade, from a training center Pressing force: approx. 5-10 tons Fsdpfx Adszcqmlo Ijpi Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, pressing force: 10 t, stroke length: 115 mm, table width: 470 mm, table length: 360 mm, throat depth: 190 mm, distance table to ram: 210 mm, total length: 1,470 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 430 kg, Manual spindle press with C-frame Fpedpfoyzy R Esx Ad Isi Pressing force: 10 tons Clamping area: 470 x 360 mm Maximum installation height between table and ram: 210 mm Throat depth: 190 mm Spindle stroke: 115 mm Table bore: Ø 100 mm Pin bore: Ø 32 mm Weight: 430 kg Dimensions: Width: 1470 mm (ring diameter) Depth: 1400 mm Height (including Euro pallet): 1800 mm Year of manufacture: unknown Included accessories: - 10 pins Ø 32 mm - 2 clamping claws - 1 bending die base with adjustable micrometer stop - 4 bending punches The press has been rarely used and is therefore in very good condition. The hand-scraped, adjustable dovetail guides are also in excellent condition. The spindle shows no signs of wear. Sale is due to impending retirement. Inspection possible during our business hours or by appointment.

Condition: ready for operation (used), Four-column press SP60/670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Distance between columns: 670 mm Fpjdozcxhwepfx Ad Iji - Distance between columns / laterally: 400 mm - Table size: 900 x 750 mm - Vertical clearance: 520 mm - 6 x T-slots in the upper platen - 6 x T-slots in the table Dimensions: L x W x H 2 x 1.5 x 2 meters / Weight 3000 kg Subject to errors and omissions.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Fsdpoxa Hy Uefx Ad Iopi Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. Fpedpfoyzzh Eex Ad Iji The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, functionality: fully functional, Screw-type electric shelving press ITALPRESSE 2500x1200 mm Specifications: • Condition - used • Manufacturer - ITALPRESSE • Shelves with dimensions 2500 x 1200 mm • Max. clearance between shelves 500 mm • Straight, clean shelves, without dents • 2 screws with a diameter of 50 mm • Drive motor with a power of 0.75 kW • Original paint • Overall dimensions 285 x 120 x 160 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown illustrate the actual condition of the item for sale • Possibility to switch on and inspect the device on site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Fpedpfx Adoza If Te Iei Financing and transport: • We arrange transport using the MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm Fpodpfxjy S Syao Ad Ioi  Weight: 335 kg Condition: good, little use

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Fjdpfxsyti Ipo Ad Iopi

Condition: used, Year of construction: 1963, nominal force 240 t stroke 130 - 380 mm no. of strokes 21 - 31 /min distance between columns 700 / 610 mm distance table/ram, max. stroke up, adjustment up 650 mm table surface area 620 x 620 mm ram surface 550 x 550 mm spindle diameter 180 mm power capacity 12,0 kW Fpjdpfxoyx Ik Io Ad Isi weight 10,5 t Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m only permitted for warm forming work

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? Fpodpfey H Ic Hjx Ad Isi For further information or contact options, please use the contact form.

Year of construction: 2006, condition: excellent (used), Punching capacity in sheet metal with a tensile strength of 37 kg up to: 2 and 3 mm Fjdpfxjd D Ryfj Ad Ijpi using various punching tools.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Fsdpfxsdzqaaj Ad Ijpi Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation Fedpjvuud Ujfx Ad Iopi