Used machining centers (vertical) X-axis travel 1700mm for sale (181)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Internal machine no. 73 Travel distances: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition Bedozzl Ugopfx Aknolp

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent, used Bedpfoz Ngy Ejx Aknelp • Functionality: Fully functional • Display: 15" • Program storage: 2 MB / 1,000 programs • Rapid traverse X/Y/Z: 30 / 30 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ball screw nut cooling • Tool breakage detection • Automatic doors • Robot interface • 4th-axis preparation • Ethernet connection • Coolant gun • Coolant level sensor Additional equipment • HIWIN RCV 320 rotary table (4th axis) • HIWIN RTS 320 support (tailstock) • Hydraulic aggregate: 200 bar, 3 A+B • Hydraulic 4th-axis fixture support: 4x oil / 4x air; seat air check • LNS MH500 chip conveyor • Oil mist extraction system • Oil skimmer Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping - Machine hood with automatic roller blind - Machine doors with automatic drive and Rotoclear window Bledpfx Akjyugupjnep - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, number of slots in tool magazine: 16, controller manufacturer: siemens, controller model: sinumerik 840D, feed rate X-axis: 800 m/min, feed rate Y-axis: 800 m/min, feed rate Z-axis: 600 m/min, spindle motor power: 6,500 W, number of spindles: 2, rotational speed (max.): 30 rpm, spindle nose: HSK F50, spindle speed (max.): 36,000 rpm, Equipment: documentation/manual, 5-axis CNC machining center for machining plastic and composite parts. Immediate availability. Cartesian suspension bridge construction. Axis motion: brushless servomotors, rack-and-pinion systems, guides with preloaded recirculating ball bearings. X 2500mm 80m/min Y 1500mm 80m/min Z 900mm 60m/min C 540° 30rpm A 315° 30rpm Rotary table with mounting holes and jig centering. Head: 2 heads c.u. 8 positions 6.5kW (S1) HSK F50 36,000 rpm liquid cooling. CNC: Siemens Sinumerik 840D Bledpfstphpijx Aknep Lubrication: automatic grease Supply voltage: 3 x 400V / 50Hz (+/- 5%) Supply pressure: 6 bar Installation: upon request

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Heidenhain CNC control with Siemens motors/servos Blsdpfx Aezhat Deknsp Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840 D solutionline, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h Additional equipment Bedpfx Aeyrqvloknelp • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: Itnc 530, spindle speed (max.): 12,000 rpm, spindle motor power: 45,000 W, number of axes: 4, This 4-axis IBARMIA ZV45 L3000 was manufactured in 2003. It features a powerful 45 kW spindle with a maximum speed of 12,000 rpm and an SK40 tool holder. The machine offers a generous working envelope of 3000 x 800 x 800 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV45 L3000 vertical machining centre we have for sale. Contact us for further details. • Probing: Probe included Bljdpjzxz Svefx Aknjp • Coolant: Through-spindle coolant Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control 20-position tool changer Coolant system CE marking Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Blodpfx Akozk Etnsnjp The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,600 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 18,000 m/min, controller model: HARTROL PLUS 1 (MITSUBISHI), table width: 820 mm, table length: 1,750 mm, table load: 2,200 kg, number of slots in tool magazine: 40, Hartford HCMC-1682 Vertical Machining Center – Year 2017 The Hartford HCMC-1682 vertical machining center represents an ideal solution for medium and large-size mechanical machining operations that require high structural rigidity, reliability, and precision. Thanks to its robust construction and ISO 50 spindle, this machine is particularly suitable for roughing and finishing operations on steel, cast iron, and high-strength materials. Equipped with a Hartrol Plus 1 (Mitsubishi) CNC control, the machining center offers generous travels of 1,600 x 820 x 820 mm, allowing the machining of large-size components with a weight of up to 2,200 kg on the table. Bedpfozaapkjx Aknelp The two-range speed spindle, with a power of up to 18.5 kW and a maximum speed of 6,000 rpm, guarantees high chip removal performance and considerable torque at low speeds. The machine is equipped with a 40-position automatic tool magazine, through-spindle high-pressure coolant, chip conveyor, and a dedicated spindle cooler, making it ready for intensive and continuous production. Main technical features: Hartrol Plus 1 (Mitsubishi) CNC control X/Y/Z axis travels: 1,600 / 820 / 820 mm Table: 1,750 x 820 mm Table load capacity: 2,200 kg ISO 50 spindle Spindle speed: 6,000 rpm Spindle power: 15 / 18.5 kW Tool magazine: 40 positions Rapid traverse rates X/Y: 20 m/min Rapid traverse rate Z: 18 m/min Included accessories: Chip conveyor Coolant tank with pumps High-pressure coolant through spindle Spindle coolant cooler Manuals, electrical diagrams, and CE declaration

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC Machining Centre Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine no.: 8 Bjdpjylkydsfx Aknslp Travel ranges: X-axis: 2,000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2,500 x 600 mm Spindle taper: SK 40 Tool magazine: 56 stations Spindle speed: 8,000 rpm Accessories: Chip conveyor AME KB 448 Paper band filter AME PS 120 LTA extraction unit Machine enclosure

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Bodsyt Ifyopfx Aknjlp Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 920 mm, controller manufacturer: HEIDENHAIN, total height: 7,870 mm, total width: 3,650 mm, table load: 9,000 kg, overall weight: 34,000 kg, spindle speed (max.): 3,800 rpm, product length (max.): 3,760 mm, number of axes: 3, This 3-axis HARTFORD HB 3150/S vertical machining centre was manufactured in 2005. It features a generous table size of 3000 x 1500 mm and impressive axes strokes of 3000 x 1500 x 920 mm. The machine has a maximum rotation speed of 3800 rpm and a forward speed of 10000 mm/min. If you are looking to get high-quality machining capabilities, consider the HARTFORD HB 3150/S machine we have for sale. Contact us for further details. • Table dimensions (X/Y): 3000 x 1500 mm Bljdpfx Aoy Al S Roknop • Forward speed (feed rate): 10000 mm/min • Power requirement: 50 kVA

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Bledjylirlspfx Aknep

Condition: good (used), Year of construction: 1988, Vertical machining center Blodjzqdnwepfx Aknjp available: 1272026

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,292 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,500 g, number of axes: 3, This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details. • Pendulum operation area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optional 198 Nm) • Tool holder: HSK A63 • Max tool length: 330 mm • Max tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: central coolant through spindle • Coolant tank capacity: 780 liters • Filter grade: 25 µm • Filter capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA • Compressed air requirement: minimum 7 bar • Weight: 10500 kg • Machine enclosure: full enclosure with electric roller door • Positioning system: glass scales on X/Y/Z axes Bedpfxsyz Spte Aknelp • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional equipment • Chip conveyor: scraper belt type, discharge height approx. 1150 mm • Extraction system: MultiAir exhaust filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Blodpfx Akey Enzaenop Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Bodpfx Asyh U E Heknolp Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Bodpfx Aozf T I Njknelp Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Bsdpfxozaq Eco Aknelp Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine Blodpfx Akeyvvlujnop - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Technical data: X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Bljdpfx Aozv Sk Rsknsp Constant power at standard version from: 1,500 min⁻¹ FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 2,500 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, overall weight: 19,000 kg, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details. Bledpjz A Ugxsfx Aknsp - Voltage (Spannung): 400 V- Frequency: 50 Hz- Connected Load (Gesamtanschlußwert): 40 kVA- Machine Structure: Moving column / dual-workspace setup with central splash guard partition- Additional Equipment: Chip conveyor, hydraulic/coolant unit

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel ranges: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Bedpfx Akjwwt Nmonolp Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons 31126ä

Condition: excellent (used), Year of construction: 2006, 5-axis vertical machining center Brand: IBARMIA Type: ZVH45/L2200 Year: 2006 CNC: SIEMENS 840 D Specifications: Table surface: 2,600 x 800 mm X-axis travel: 2,200 mm Y-axis travel: 800 mm Z-axis travel: 860 mm C-axis: 360,000 positions A-axis: +/- 105° (0.001°) Spindle speed: 15,000 rpm (HSK 63) Spindle power: 25 kW Equipped with: 30-position tool changer Chip conveyor Electronic handwheel SIEMENS SPIRSIN H/V rotary table, dia. 800 mm Bljdjzq Ea Iepfx Aknep Through-spindle coolant

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 5-axis CNC machining center for processing carbon fiber and fiberglass components, plastics, Ureol, and wood. Availability: approximately 4–6 weeks. Machine details: CMS ARES 3626 - Axis travels: X-axis: 3,600 mm Y-axis: 2,600 mm Bljdsza Dliepfx Aknop Z-axis: 1,200 mm B-axis: +/- 120° C-axis: +/- 270° - Universal tool head (20 kW | max. speed: 24,000 rpm), synchronized - Tool magazine: linear magazine with 16 stations, moving in the X-direction - Tool holder: HSK 63A - Machine table with vacuum aluminum plate - CNC control: Osai Open - Vacuum system: 2 x 100 m³/h - Swivel operation, round axis measuring unit, 3D measuring probe, dust protection, preparation for extraction system, ... Additional services: installation, commissioning, and training available!