Used Vtc for sale (88)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Cgsdpfxjymw Nhj Aa Eop X-axis: 1,660 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 760 x 2,000 mm Max. table load: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket free: 110 mm Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control: MAZATROL M-PLUS Dimensions & Weight Required space: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been serviced regularly.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm Codpfx Aajx Nkp Us Esgp • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle taper: HSK63 Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf max. tool length: 350 mm Csdpfxox Idwis Aa Eegp Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Condition: used, Year of construction: 1996, x-travel 1040 mm y-travel 510 mm z-travel 640 mm control Mazatrol type M Plus Tool changer 24 Pos. weight of the machine ca. 5,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Cgsdpfx Aeyqr Uyea Eop We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Cgedpfxoxk U R No Aa Eep Number of tools in the magazine: 24 Plätze

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Codpfjyh Sc Njx Aa Eegp Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Spindle power: 18.5 kW Spindle speed: 12,000 rpm Tool changer: 30 positions IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling system: Yes Cjdpfx Ajylnxkea Eogp

Condition: used, Year of construction: 2016, Technical details: total power requirement: 55 kW weight of the machine ca.: 13 t We offer you 4 x EMAG complete € 50.000 free loaded new EMAG is around € 500.000 Cgsdjxy I Exepfx Aa Ejp *

Year of construction: 2014, condition: excellent (used), CNC FUSION 640 M,Table 2000 x 760 mm,Strokes 1740 x 760x 660 mm,spindle speed 12.000 rpm,center coolant 15 bars,magazine 30 tools,4 th Axis KITAGAWA MR 250,Package performance,electronic crank,conveyor belt Csdpfxek Sfwfs Aa Ejgp

Condition: used, Year of construction: 2016, CNC MATRIX 2, table 3500 x 800 mm, travels 3000 x 800 x 720 mm, spindle speed 18,000 rpm, 48-tool magazine, through-spindle coolant, central divider for pendulum operation, SANKYO DS50C-R1-2 rotary table, 5 simultaneous axes, chip conveyor. Cjdpfxexyzhaj Aa Eogp

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg Cgsdpoyiu N Dofx Aa Ejp table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E - NEWMACHINE

Condition: excellent (used), Year of construction: 1995, Mazatrol M32 B control Travel X/Y/Z: 1660/510/510 mm Spindle speed: 7000 rpm Tool magazine for 24 tools, SK 40 Table size: 2000x510 mm Cgodpfx Aasyiu Rho Eep

Condition: used, Max. Swing Diameter: Ø2,700 mm Max. Turning Diameter: Ø2,500 mm Cgedpfx Aaeyk U Ngs Eep Max. Cutting Height: 2,000 mm Max. Torque: 40,403 N·m Max. Cutting Force: 3,000 kgf Max. Workpiece Weight: 12,000 kg Table Diameter: 2,000 mm Table Speed Range: 1 – 200 rpm Table Speed Control: Automatic 2-step Table Indexing Accuracy: 0.001° C-axis Cutting Feed Speed: 0 – 900 deg/min C-axis Max. Speed: 2.5 rpm Milling Spindle Speed: 30 – 3,000 rpm Milling Spindle Torque: 45 kgf·m Ram Head Item Specification Number of Tools: 1 pc Tool Size: 32 × 32 mm Ram Section Size: 240 × 240 mm Spindle Taper: ISO 7/24 No.50 Tool Magazine Capacity: 24 tools Max. Tool Weight: 50 kg CHIP CONVEYOR TOOL MEASUREMENT SYSTEM (RENISHAW) MANUAL/HYDRAULIC COMBINATION CHUCK LINEAR SCALE (X Z C) MILLING TOOL 4 pcs LATHE TOOL 5 pcs

Condition: new, empty load weight: 660 kg, maximum load weight: 2,840 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 340 mm, loading space volume: 1.4 m³, color: silver, construction height: 1,670 mm, working width: 2,100 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 660 kg - Payload: 2.840 kg - internal dimensions: 300 x 150 x 34 cm (L x W x H) - loading sill height: approx. 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 28cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 8x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Csdpfx Asu Hrh Eea Eegp

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Cgsdpfetuggcox Aa Eep Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of manufacture 2018 / Commissioned 2019) The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, allows for the accommodation of large-dimensioned workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of around 22 kW, ensures high metal removal rates and accuracy. The CAT 40 (ISO 40) spindle taper provides broad tool compatibility. The machine is equipped with a state-of-the-art MAZATROL SmoothG control system, offering intuitive operation, fast programming, and high process reliability. The 48-position tool changer enables flexible and efficient production processes, even for complex manufacturing tasks. To ensure optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that delivers high precision, performance, and reliability for industrial manufacturing applications. Csdoyipy Rjpfx Aa Ejgp With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Year of construction: 1997, condition: ready for operation (used), Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories. Cgodsiph Ukepfx Aa Eop

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Cedjx Ih Dmjpfx Aa Eegp

Condition: ready for operation (used), Year of construction: 1998, A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible. Cedpsxfvicjfx Aa Ejgp

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Csdpjvdkdiofx Aa Esgp

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, overall weight: 12,000 kg, table width: 2,000 mm, controller model: PC Fusion 640 M, spindle speed (max.): 12,000 rpm, spindle speed (min.): 40 rpm, table height: 760 mm, table load: 1,400 kg, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Cedpfx Aasyddlws Eegp Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition Cjdpfx Aaex D I A Ss Eegp • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, Options: Chip conveyor Cgsdovb Ufxopfx Aa Esp Tool feeler 15-bar coolant Air blower Performance package Memory extension 8 MB 2 additional M codes Central partition

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Csdov Ax Uyepfx Aa Eogp Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, number of axes: 3, This 3-axis Mazak VTC-20C was manufactured in 1999. It features a vertical machining center with a table load capacity of 1,000 kg and dimensions of 510 mm by 2,000 mm. The machine offers X, Y, and Z-axis travels of 1,660 mm, 510 mm, and 510 mm respectively. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-20C machine we have for sale. Contact us for more information. • Capacity: • Drilling capacity in S45 (JIS): 25 mm • Milling capacity in S45 (JIS): 165 cm³/min • Tapping capacity in S45 (JIS): M24 × P3 • Table: • Height from floor: 750 mm • Number of tables: 1 • Table length: 510 mm • Table width: 2,000 mm • T-slots (number): 5 • T-slot reference width: 18 mm Cgsdpsycii Eefx Aa Eep • T-slot distance (pitch): 100 mm • Distances: • Spindle nose to table top: 180–690 mm • Spindle center to column: 550 mm