Milling machining centers - vertical
MAZAK VTC-820/30

Name: MAZAK VTC-820/30
Brand: MAZAK
Availability: InStock

Year of construction

2023

Condition

Used

Location

Bremen

Milling machining centers - vertical MAZAK VTC-820/30

Basic data

Machine type:: Milling machining centers - vertical

Manufacturer:: MAZAK

Model:: VTC-820/30

Year of construction:: 2023

Condition:: used

Price & Location

Location:: Bremen

Call

Details about the offer

Listing ID:: A21546288

Reference number:: 1023-1140781

Update:: 19.03.2026

Description

x-travel 3000 mm
y-travel 820 mm
z-travel 720 mm
Control Mazatrol Smooth G
spindle taper SK 40
spindle turning speed range 35 - 12.000 U/min
spindle motor 15 kW
distance spindle centre table top edge 140 - 860 mm
table load 2500 Kg
rapid travel x/y/z 50 m/min
table width 3500 mm
table length 820 mm
table height over floor 870 mm
T-slots 7
T-slot - width 18 mm
T-slot - distance 100 mm
tool change unit 48
tool changing time 4,7 sec
wotkpiece diameter with 2 vacant positions 130 mm
workpiece diameter at full load 80 mm
max. tool weight 8 kg
tool length - max. 350 mm
air pressure - required 5 - 9 bar
Air volume 260 l/min
electrics - voltage/frequency 400 / 50 V/Hz
coolant tank 500 l
total power requirement 46,7 kW
weight of the machine ca. 15,4 t
dimensions of the machine ca. 5,3 x 3,6 x 3,3 m
Standard machine including the following optional extras:
- Provision for dual oil mist extraction
- Air cooling via the rotating milling spindle
- 48-tool magazine
- Pulse handwheel
- 3-colour LED signal light
- Additional work area lighting
- Air blow-off device on the milling spindle
- High-pressure coolant supply through the spindle (15 bar)
- Provision for MAZAK Monitoring
- Chip conveyor with left-hand ejection (Crowther)
- Manual grease gun
- Grease cartridge
- Mazak API
- Drilling cycle with automatic chip breaking
- Synchronous thread cutting
- Rapid traverse with constant angle of inclination

STANDARD ACCESSORIES
Adaptation for the European market
USB port (1 port)
Mazak standard colour
Work area lighting

SAFETY FEATURES
Operator door with interlock switch
Work area cladding
The splash guard enclosure encloses the work area from the side.
Fully enclosed work area
Protection against chips, coolant and access to the work area during
automatic machining.
Safety precautions in accordance with global standards

COOLANT SUPPLY
Coolant supply via spindle (pump pressure = 5 bar)
Complete coolant system includes pumps, valves, pipework and nozzles
for the efficient production of high-quality components.

FACTORY AUTOMATION
Automatic start/stop and warm-up function
Automatic activation of a warm-up via digital timer

MEASURING SYSTEM
Tool length measurement and tool breakage detection

NUMERICAL CONTROL
Horizontally adjustable NC control panel
Relocation Detector
Mazatrol SmoothG control
19" colour LCD screen (touch screen)
Mazak Tornado tapping/drilling cycle (Mazatrol)
EIA/ISO input function
Tool path verification in the background
3D coordinate conversion
Shape compensation for rotating axes
Mazacc-2D software (contour correction)
Mazacc-3D software package
Isdpfx Ajyvvluehbotn
MAZACC-3D high-speed software package (NO456) is additionally required.
Control system with high smoothing
Interface for LAN
SD memory card interface
Smooth Standard Software for M/C
- NO443 B) MAZACC-2D software (workpiece shape compensation)
- NO444 D) MAZACC-3D high-speed software package
- NO445 B) Shape compensation for rotating axes
- NO497 D) High-precision control for finishing
- Seamless corner point control
- Variable acceleration control
- Ultra-high-speed machining mode
- NO498 Rapid traverse paths, rounding function
Absolute positioning system

- All dimensions, weights and performance specifications are subject to change -

- Used machine without warranty -

- Subject to prior sale -

Seller

Registered since: 2004

8 listings online

Call

Send inquiry

Telephone & Fax

+49 421 4... show

+49 421 3... show

Fax:

These listings may also fit your interest.

Listing

Eskilstuna

17,491 km

2012 Mazak VTC-820/30
MazakVTC-820/30

Call

Condition: used, Year of construction: 2012, Mazak VTC-820/30 – specification Overview - Brand: Mazak - Model: VTC-820/30 - Year model: 2012 - Location: Eskilstuna Control system - Mazatrol Matrix Nexus Movements - Number of axis: 4 (X, Y, Z + 4th shaft) - X-axis: 3.000 mm - Y-axis: 820 mm - Z-axis: 720 mm - Fast transport: 50 m/min - Distance spindle nose to table: 140–860 mm Spindle and tool - Spindle effect: 22 kW - Spindle RPM: 12,000 rpm - Spindelkona: CAT 40 - Tool changer: 30 positions Itsdjz N An Eopfx Ahbjn - Cutting fluid through the spindle: 15 bar Table - Table size: 3,500 × 820 mm - Max table load: 2,500 kg - T-slots: 7 pcs, 18 mm, pitch 100 mm 4th axle - Round Feeding Table Mazak DS50C-R1-Z, Ø 500 mm, with Roller Gear Cam - Vertical mounting on angle shelf Mazak MAZ 80090X Dimensions and weight - Machine depth: 3,700 mm - Machine height: 3,050 mm - Machine weight: 16,100 kg Equipment - Renishaw tool breakage control TRS2 - Shavings conveyor to the left, lamella conveyor with timer relay - Cutting fluid through the spindle, 15 bar - Manual rinsing nozzle - Portable pulse generator (handheld) for shoulder movements - Automatic power shutdown at end of program - 3 extra M-functions (1 pair) - Robot interface, Ethernet/IP slave - Automatic doors

See details

Listing

Topole

17,831 km

Gear motor
SEW, Nord, Siemens, Lenze

€165,000

Fixed price plus VAT

Call

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Iedoy Tg Saspfx Ahbetn Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Please note that unrealistic price offers will not be answered.

See details

Listing

Gantry milling machine Fooke Endura 905 Linear

Baienfurt

18,634 km

Gantry milling machine
FookeEndura 905 Linear

Call

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Itjdpfx Ahozkuirjbon Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

See details

Listing

Germany

18,654 km

HAAS ST-15
HAASST-15

Call

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h Iodpfx Asy R Dh Tehbjtn • Finished parts counter: 250 • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

See details

Listing

Gear Hobbing Machine - Vertical GLEASON- PFAUTER P 1600

Germany

18,510 km

Gear Hobbing Machine - Vertical
GLEASON- PFAUTERP 1600

Call

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm Iedpfx Ahsw Rrb Hjbjtn tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

See details

Listing

Bed Type Milling Machine - Universal Erste Maschinenfabrik Auerbach FBE 1500

Germany

18,261 km

Bed Type Milling Machine - Universal
Erste Maschinenfabrik AuerbachFBE 1500

Call

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Itsdju Nc Riopfx Ahbsn Reference tool SK40 Milling head SEMPUCO *

See details

Listing

Contamine-sur-Arve

18,946 km

CNC lathe
OKUMAL300-MW

Call

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher Itedpfx Aouhbnnehbsn - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

See details

Listing

CNC - Machining Center - Horizontal HELLER MC 2000

Halberstadt

18,302 km

CNC - Machining Center - Horizontal
HELLERMC 2000

Call

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet Itsdpfx Ajx Hn D Rjhbjn - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

See details

Listing

CNC turning and milling center – 5 axes – simultaneous IGREK FR 1000 T

Halberstadt

18,302 km

CNC turning and milling center – 5 axes – simultaneous
IGREKFR 1000 T

Call

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications Itsdpfx Ajxmd S Ishbjn The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

See details

Listing

HEDELIUS mod. CB80 MAGNUM Hedelius CB80 MAGNUM

Cuggiono

18,798 km

HEDELIUS mod. CB80 MAGNUM
HedeliusCB80 MAGNUM

Call

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Itodpfx Ahjv Sdc Ueben

See details

Advertise here