Matec 30 HV

Matec 30 HV

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Hjdpfxexg Dhco Aitsnu Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Hnedpfx Aegu U Iteitou

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,189 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430PB, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details. - Rotary Table Diameter: 800 mm- Axes: 3-axis (X/Y/Z)- Swivel head: ±110°, 1° indexed positioning- Head indexing: Incremental, 1° steps- Coolant / Compressed Air Supply: 40 bar through the spindle- Number of Spindles: 1- Tool Magazine Slots: 36- Input Power Type: Three-phase current- Additional Equipment & Features: D800mm rotary table installed, chip conveyor, paper band filter unit, documentation/manual, continuously variable speed Technical Specification Hodpozvc Awjfx Aitenu Taper Size SK 40

Condition: good (used), Year of construction: 2004, Universal machining center: Fahrständer / travelling-column Machine type: Matec 30 HV Control: Siemens 840 D Sinumerik Year: 2004 SPECIFICATIONS Travel X-Axis: 2.000 (2 x 750) mm Y-Axis: 600 mm Z-Axis: 800 mm B-Axes: +/- 105° C-Axis Spindle speeds: 15.000 rpm Spindle power: 15 kW Torque: 100 Nm Tool: HSK 63 Hodpfx Aez Dkr Teitjnu Tool capacity: 48 NC rotary table: RW/NC-160/250 Equipment Internal cooling: 20 bar cooling system Chip conveyor Caliper separating plate Direct linear scales

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Hodpfxjzkpupo Aitenu Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2011, Universal machining center Travel ranges x/y/z = 3000 / 800 / 1000 mm Spindle speed up to 15,000 rpm Spindle drive power 30 kW - 190 Nm Tool magazine with 48 tool positions, HSK 63 max. tool diameter 70 / 130 mm max. tool length 340 / 450 mm max. table load 1500 kg Machine weight approx. 17,500 kg - Oscillating operation - Coolant system - Chip conveyor - CNC control Heidenhain iTNC 530 - Integrated rotary table Hjdjz Apfrepfx Aitsnu - Swiveling milling head, horizontal/vertical

Condition: good (used), Year of construction: 2005, functionality: fully functional, overall weight: 21,000 kg, Manufacturer: MATEC – Model: 30 HV – Year of Manufacture: 2005 – Heidenhain iTNC 530. Travels X/Y/Z: 3000 / 800 / 800 mm. 4-axis swiveling head – PREPARED FOR 5-AXIS MACHINING – 36-position tool magazine – SK40 – 20–9000 rpm – 30 kW – 20 bar through-spindle coolant – 450 L tank – Chip conveyor – Ethernet – Central lubrication – Renishaw probe preparation. Condition: Tool changer overhauled. Machine in good condition and ready for demonstration under power. Hnjdpfxoz Ei Ago Aiteu

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] Hjdpfx Aeuhbnnjitonu - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees Hnsdpezyy Rmofx Aiteu - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 1999, Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible. Hedpfxjzz Irhe Aitenu

Condition: good (used), Year of construction: 2003, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150 Condition: USED Year: 2003 Hedpfx Ajhakfaeitsnu Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 17.5t, machine-on operating hours: 31,546h, control-on operating hours: 56,903h, program run time: 10,521h, with documentation. An on-site inspection is possible. Hnedszun U Nopfx Aitju

Condition: ready for operation (used), Year of construction: 2012, A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement. Hnjdjzka Nqjpfx Aitou

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Hnedpfszkuirex Aitou Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Hjdezndurjpfx Aitonu Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.