Used Axa for sale (40)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,108 h, Functionality: fully functional, machine/vehicle number: 86795, travel distance X-axis: 720 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, Ball screw: X-axis replaced by AXA in 2024 TECHNICAL DETAILS X-travel: 720 mm Y travel: 520 mm Z-travel: 600 mm Clxjjf0Fv3 Control: Heidenhain iTNC 530 Table clamping surface: 1350 x 500 mm Grooves: T-slots, 5x 14H9 + 14H7 Spindle Spindle holder: SK 40 DIN 69 871 A Speed range: 30 - 10,000 rpm Spindle motor: Kessler DME 112 AL Number of tool positions: 22 (2 of which are defective) MACHINE DETAILS Machine weight: approx. 8.5 tons Dimensions: 2,350 x 2,230 x 2,114 mm Connected load: 55 kVA Machine switch-on time: 63,489 h Control system switch-on time: 65,078 h Program run: 18,108 h EQUIPMENT - Heidenhain iTNC 530 control - 3D measuring probe - Rotary table RTA 2-300 - HR 410 electric handwheel from Heidenhain - Extraction unit type IFMC 1800 - External belt filter system SA 25/KE 400

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Technical details x-travel 2940 mm y-travel 900 mm z-travel 950 mm Control Heidenhain iTNC 530 Additional information 5-axes Universal Machining Center Travels: X-axis: 2940 / 2 x 1220 mm Y-axis: 900 mm Z-axis: 950 mm CNC swivelling milling head with infinitely variable positioning, directly programmable from -90 to +90 deg. Speed range: 35 to 8000 rpm. Drive power: 20 kW Tool holder: SK 40 Tool positions: 2 x 22 (44) Table size: 3890 x 800 mm Built-in NC rotary table RTA4S800 Equipment: CNC control HEIDENHAIN iTNC 530 Chip conveyor Measuring probe, RENISHAW OMP 60 Coolant system Paper band filter SA 25/600, 20 bar Electronic handwheel Heidenhain HR 410 Operating instructions Dqpppj Machine parameters on storage medium

Condition: good (used), Year of construction: 2002, AXA VARIO 3 axes vertical machining center Year of construction 2002 Control HEIDENHAIN TNC 426M Machine number 86031 Dqpe0B Travel X - 1,760 mm / Y - 600 mm / Z - 600 mm Equipment: Spindle SK 40 Speeds 0 - 8,000 rpm. Tool changer 30-fold Electronic handwheel Chip conveyor Coolant device with paper belt filter Operating instructions Machine parameters on storage medium All other accessories shown in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Exposé - illustration, content and information without guarantee, therefore not binding - see "PDF". SPECIAL PRICE net 8.900 € FCA D-95233 Helmbrechts excluding packaging Delivery time immediately Subject to prior sale / payment immediately upon completion of purchase

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 O8Kxzxxe87 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: used, Year of construction: 2008, x-travel 2.600 (2x 1.050) mm y-travel 700 mm z-travel 850 mm Control iTNC 530 Heidenhain distance spindle nose and table vert.: 40 - 890 mm Dqkarz distance spindle nose and table hor.: 250 - 1.100 mm Main spindle: turning speed range - main spindle 30 - 12.000 min/-1 power capacity - main spindel 40 / 26,6 kW max. Torque 191 / 127 Nm swivellable +/- 90 ° indexing 0,001 ° tool taper SK 40 work table: table surface area 3.480 x 700 mm number of T-slots 5 T-slot - width 14 H9 mm T-slot - distance 160 mm NC-Rotary table: diameter 630 mm Tool-Presetter: number of toolpositions 22 pos. tool taper SK 40 max. tool diameter 85 / (135) mm max. tool length 400 mm feeds: rapid traverse ( X / Y / Z ) 40 / 40 / 30 m/min total power requirement 69 kVA weight of the machine ca. 21,5 t dimensions of the machine ca. 9,0 x 4,5 x 3,2 m CNC - Travel Column Milling Machine AXA - VHC 3 / 2600 XTS - 5 Axis - Swivel-spindle +/- 90° - incl. extensive tool package: approx. 14x drill chucks approx. 20x collets ER16 approx. 10x knife heads / holder approx. 10x MK holder approx. 60x Weldon holder 1x 3D mechanical probe 1x radio probe Renishaw RMP 60 - WITHOUT clamping devices

Condition: good (used), Year of construction: 2008, CONTROLS .. CNC controls HEIDENHAIN ITNC 530C BASIC DESIGN .. basic design: moving column WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 750 mm .. Y-axis travel: 500 mm .. Z-axis travel: 600 mm TABLE .. table surface (left-right): 1000 mm .. table surface (front-back): 500 mm .. workpiece load (max): 800 kg SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 TOOL MAGAZINE .. number of positions: 22 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 4500 mm .. total height: 2800 mm .. total weight approx.: 8000 kg Machine for shuttle operation 2xX750mm, Machine in good and well-maintained condition Bshdcmclyca Has only processed aluminum or plastic Equipment: - various tool holders - each side with 3R clamping system (see photo) - Workspace light

Condition: refurbished (used), Year of construction: 2003, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 600 mm, controller model: iTNC530, New Super favorable price!!! 149.000,-EUR net Machine completely renovated in 2023 at the AXA plant in Schöppingen. We have messprotokol, like a new machine. VPC40 U no.86350 X,Y,Z 2300/1200/600mm Heidenhain iTNC53 SK40 Workpiece:60 Rotary table AXA RTA5S 1100x1100, direct measuring head 2,5° 30BAR Spindle no. 110, 30 kW, 143 Nm, 10,000 ford/perc 3D probe Renischaw, Summary of the work: Removal of the cross slides and the Y and Y-axis slides Repair of the cross slides at the AXA plant in Schöppingen Adjusting the machine geometry and machine functions, adjusting accuracy to operating values (Checking and regrinding gibs, gluing on new Turcit coating for slides) Installation of overhauled spare parts Replacing the Y and Y-axis ball screw gearboxes (incl. belts, bearings etc.) Replacement of wear parts in need of replacement Thorough cleaning of the machine Cdoeyfte Check cable trailing, including hydraulic lines, pneumatic lines, electric cables, plugs, valves; repair -hydraulic lines, pneumatic lines Check central lubrication system, check valves Central lubrication system made IO, valves checked Check and adjust tool changers and magazines Polycarbonate disks for working door -new Replace X axis KGT Overhaul of the rotary table, - Grind surface of rotary table and fixed table Additional repair of rotary table Complete overhaul of tool changer and magazines Chip conveyor cleaning Switch cabinet cleaning Replace bellows X axis Z Axis KGT new Replaced Swivel head Repair Cable set Replace IKZ Check

Condition: good (used), Year of construction: 2006, operating hours: 51,929 h, Functionality: fully functional, machine/vehicle number: 86684, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller model: Siemens 840d + Shopmill, total height: 3,210 mm, total length: 10,000 mm, total width: 4,500 mm, rotational speed (max.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, with cross slide, SK 50, machine has a swivel head, plus Rotary table d= 800mm, traveling column and headstock made of high-quality machine casting, direct measuring systems in the basic axes X/Y/Z, power: 75 KWA, control voltage: 24 V, frequency: 50 Hz, back-up fuse: 16 A maximum, circuit diagram:86684, including: Rotary table, adaptive, diameter 800 mm, coolant pump: with 4 x Grundfos motors, and 1 x Walther Flender motor, extraction unit: type: ESB 300/38.1 with 37 kW, serial number: 6861-001 and Flender motor, cooling system from Rittal, tool magazine with 78 places B230Ftut Dismantling by the buyer, on-site support for loading, inspection recommended.

Condition: used, Vertical machining center Machine type: Axa VHC 3 - 3000 M Control: Heidenhain iTNC 530 Year of construction: 2002 TECHNICAL DATA: Travels: X-axis: 2,940 / 2 x 1,220 mm Y-axis: 900 mm Z-axis: 950 mm Swivel head: - 90 / + 90°, Speed range: 35 - 8,000 1/min. Drive power: 20 kW Tool holder: SK 40 Tool positions: 2 x 22 (44) Table size: 3,890 x 500 mm NC rotary table: RTA4S800 Equipment features: Chip conveyor Dc230Ar Measuring probe: 3 D, Renishaw MP 10 E Coolant system Paper belt filter: SA 25/600, 20 bar Electronic handwheel: Heidenhain HR 410

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Pfrzd

Condition: excellent (used), Year of construction: 2002, AXA Vario 2 Year 2002 Travel X : 1700 mm Travel y : 600 mm Travel z: 600 mm 1,760 mm or 2 x 700 mm IKZ Fzjdgak Tool changer : 22 times / SK 40 8000 1/min

Condition: repair required (used), Year of construction: 2005, Functionality: limited functionality, Equipment: chip conveyor, Machine is being sold due to defective X-axis spindle drive. The spindle is jammed, the nut unit for the X-axis has already been replaced and can possibly be reused. The price for the nut unit was 1,130 €, the installation was approx. 1,200 €. The ball screw drive has a delivery time of 12 weeks and was therefore not replaced. Bry3Ccr8Smm

Year of construction: 2003, Condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Y8Sd8Btr Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Dns2M9 Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Condition: used, Year of construction: 2009, tool taper SK 40 | | x-travel 4000 mm y-travel 600 mm z-travel 700 mm table surface area 4800 x 600 mm C93B97Y control Heidenhain iTNC 530 turning speeds 10.000 U/min 36 St. drive milling spindle kW head swivability +/- 90,/ 0,001 ° rapid traverse 40/40/30 m/min dimensions 8,0 x 4,5 x 3,2 m weight of the machine ca. 21,5 t Used traveling coloum machine with swifeling head and extra 4. axis - internal coolant 20 bar - chip conveyor - two work areas possible - swiable head CNC controled - 4th axis with counter bearing. 250 mm centre hight - external hand wheel

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. Nycpx The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,554 h, General Data Measurements width 7000 mm Measurements depth 10000 mm Measurements height 4000 mm Machine weight 33000 kg Control Unit Brand Heidenhain Model iTNC 530C Main Drive Spindle speed range 30 - 7.500 min-1 Spindle motor power 25 kW Tool taper SK 50 DIN 69871A Media Chip conveyor Yes Additional Equipment X-Axis: 2000 mm (vertical), 1400/2 mm (horizontal) / Y-Axis: 900 mm (vertical/horizontal) / Z-Axis: 1200 mm (vertical), 940 mm (horizontal) / B-Axis: Swivelling milling head, +/- 115° Pick-up station Coolant system High-pressure cooling High-pressure cooling Paper belt filter Hydraulic unit Various tool holders approx. 10 pcs Measuring probe Electr. handwheel, Operating mode 4 General Data Measurements width 7000 mm Measurements depth 10000 mm Measurements height 4000 mm Machine weight 33000 kg Control Unit Brand Heidenhain Model iTNC 530C Main Drive Spindle speed range 30 - 7.500 min-1 Spindle motor power 25 kW Tool taper SK 50 DIN 69871A Media Chip conveyor Yes Uicxw2Iqur Additional Equipment X-Axis: 2000 mm (vertical), 1400/2 mm (horizontal) / Y-Axis: 900 mm (vertical/horizontal) / Z-Axis: 1200 mm (vertical), 940 mm (horizontal) / B-Axis: Swivelling milling head, +/- 115° Pick-up station Coolant system High-pressure cooling High-pressure cooling Paper belt filter Hydraulic unit Various tool holders approx. 10 pcs Measuring probe Electr. handwheel, Operating mode 4 This 5-axis AXA VHC 50 - XTS 2000 universal machining centre was manufactured in 2008. It features a Heidenhain iTNC 530C control, a swivelling milling head with infinite positioning, and a NC rotary table. The machine offers a spindle speed up to 7,500 min/-1, a tool changer with 60 positions, and a high-pressure coolant system. Ideal for complex machining tasks, the AXA VHC 50 - XTS 2000 machine we have for sale. Contact us for further details regarding this universal machining centre. Application Types Milling

Condition: as good as new (ex-display), Functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, total height: 34,000 mm, total length: 96,000 mm, total width: 33,000 mm, table width: 800 mm, table length: 3,060 mm, table load: 1,200 kg, spindle speed (max.): 6,000 rpm, tool length: 400 mm, power: 0.02 kW (0.03 HP), Equipment: documentation/manual, Vertical (pendulum) center with moving column AXA mod. VHC-3-M/2E with: - X-axis stroke mm. 2600 Cmt8Umfmdw - Y-axis travel mm. 700 - Z-axis travel mm. 850 - CNC Heidenhain i-TNC-530 - continuous automatic head on B-axis ± 90° rotation - spindle rotation speed 6000 rpm - coolant system through high-pressure spindle - 22+22 tool magazine - hinged belt chip conveyor - equipment accessories - overhauled machine Free deferment in 12/24 months

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 86350, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC53, number of slots in tool magazine: 60, Machine completely overhauled at the AXA plant in 2023. Measurement protocol as for a new machine available. TECHNICAL DATA X-axis travel: 2,300 mm Y-axis travel: 1,200 mm Z-axis travel: 600 mm Control: Heidenhain iTNC530 Spindle: No. 110 Speed: 10,000 rpm Torque: 143 Nm Spindle power: 30 kW Tool holder: SK40 Bg0A3Jmsy Tool magazine size: 60 Rotary table: AXA RTA5S, 1,100 x 1,100 mm, direct measuring system Head adjustment: 2.5° Cooling pressure: 30 bar 3D probe: Renishaw Measurement protocols on request Summary of general overhaul Removal of the cross slides and Y-axis slides Repair of the cross slides at the AXA plant in Schöppingen Adjusting the machine geometry and machine functions, adjusting accuracy to operating values (checking gibs, regrinding, applying Turcit coating) Installation of overhauled spare parts Replacing the Y and Y-axis ball screw drives (incl. belts, bearings etc.) Replacement of wear parts in need of replacement Thorough cleaning of the machine Check and repair cable trailing (hydraulic lines, pneumatic lines, electric cables, plugs, valves) Central lubrication systems and valves checked Tool changer and magazine checked and adjusted Polycarbonate disks for working door replaced Replacement of the X-axis ball screw drives Overhaul of the rotary table Grinding of the surface of the rotary table and the fixed table Additional repair of the rotary table Complete overhaul of the tool changer and magazine Chip conveyor cleaned Switch cabinet cleaned New bellows of the X-axis replaced Z-axis ball screw drive replaced Swivel head repaired Cable set replaced IKZ (internal cooling) checked

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Cbbnbir038 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, torque: 200 Nm, workpiece weight (max.): 5,000 kg, total height: 36,000 mm, total length: 82,000 mm, total width: 44,800 mm, table width: 1,000 mm, rotary table diameter: 1,250 mm, overall weight: 30,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, tool length: 400 mm, tool diameter: 135 mm, input voltage: 400 V, power: 69 kW (93.81 HP), Equipment: documentation/manual, rotational speed infinitely variable, Five-axis machining center AXA VHC3 - 4000 XTS with tilting head and rotary table (X-axis is 4000mm long, Y-axis 1000, using the rotary table it is a five-axis with a turning diameter of 1.25m) With this accessory: Pendulum operation Extension of stroke Y to 1000 mm and Z to 950 mm, table width 1000 mm Expansion of the basic tool magazine from 22 to 36 places Bjf87Fcfmzv Continuously adjustable NC-tilting head in 1 axis, freely interpolable Increased power of the main drive, replacement for drive No. 111 Speed range 30-12,000 rpm. Internal cooling 20 bar Cooling through the centre of the spindle using a stream of compressed air Surcharge for external coolant tank 800 liters Preparation for chip conveyor, including cabling AXA RTA 5TF-1250 rotary table Integration of a rotary table into a fixed one with rounding adjustment Modification of works of the machine space for fitting the RTA5TF-1250 / 1500 2 pcs manual flushing gun for cleaning cooling water Heidenhain TNC 640 Electronic handwheel with 2 m spiral cable Blum TC60 3D workpiece probe, radio beam Blum ZX Speed tool cable probe Preparation of the cabin for exhausting mists created during machining

Condition: new, Year of construction: 2024, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. Q2Pemkrf They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drill, Multi-spindle drilling machine -System without control -1x quill processing units Lialt -2x sledges -Max. Feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg

Condition: used, Quick change tool post, tool holder head, quick change tool post, quick change boring tool post, quick change boring bar post, quick change turning tool post P7Wtn -Manufacturer: AXA, quick-change tool holder Multifix D1H 63180 -Shot dimensions: see photos -Clamping length: 180 mm -Dimensions: 180/95/H185 mm -Weight: 8.3kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump Bamedsdhno -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg