Paper drill, fabric drill, drill for paper or fabrics
-projection: max. 90 mm
-Rear stop is adjustable
-Max. Intermediate dimension: 190 mm
-Stroke drilling spindle: 45 mm
-Admission drill: 16 mm
-Dimensions: 1200/850/H1400 mm
-Weight: approx. 50 kg
Technical data paper roll cutting machine
Year of manufacture unknown
Dimensions feed table for rolls:
Width inside of rolls 2.195 mm
Height inside of castors 465 mm
Transport dimensions Feed table over all:
2,650 x 1,300 x 2,150 mm (W x H x D)
Dimensions roller cutter:
Width cutting shaft inside 2.250 mm
Transport dimensions of the roll slitter over all:
3,050 x 1,550 x 550 mm (W x H x D)
There are no further data or documents availa...
Sliting, cutting, creasing and perforating in one pass
Upper belt suction feeder
Cut register mark detection
Touch screen setting up
Min paper format: 210 x 210mm
Max paper format: 365 x 520mm
Min finished paper size: 55 x 50mm
Paper weight 120 - 350gsm
Max Size: 720mm
Min Size: 126mm
Prebreakers Left+ Right
Folding of packages ensured by left and right hand folders.
Controlled Press Station
Press Station Extension
Compact Rinak saddle block stapler for the use of staples from the 26 series. With the Rinak you can block stitching up to 40 sheets and saddle stitching up to 30 sheets, in addition, the staple magazine has a capacity for 210 pre-formed staples.
The machine is supplied as a table model, an optional height-adjustable foot is available for the Rinak. The Rinak is equipped with a folding table so that you can quickly switch between block and saddle stitching. You can also process RI2...
The OMM Mariner 1 is a strong creasing machine, made of cast iron.
The maximum working width 50 cm. It is a manual creasing / punching machine. This machine is adjustable at right angles via rear and side installation. Half sheet of perforation present. Including perforation comb and creasing comb with narrow and wide crease.
Semi-automatic pressing system with 60 t pressing force for an economical volume reduction of the rest (value) in industry & trade:
and other pressable materials.
Marketable bales up to approx. 450 kg.
Semi-automatic press system.
Variable structure - input side / bale ejection - possible depending on spatial conditions.
Easy binding of the pressed bales by means of wi...
Nagel Foldnak 40
A booklet maker for print and copy shops: the Hohner Foldnak 40 booklet maker handles all paper qualities with both standard and loop staples. Corner and edge stapling functions are available as options. Resizing is easy, from 105mm x 210mm to SR A3 size and every size in between. The Hohner Foldnak 40 works in conjunction with friction tower collectors from other manufacturers and can produce up to 1500 booklets per hour. Reliable, precise and with the renowned Hohner...
- Arbeitsbereich X - Achse 1700 mm
- Arbeitsbereich Y - Achse 2500 mm
- Schnitt Geschwindigkeit: 200 - 800 mm / s (abhängig von Material)
- Schnittiefe: bis zu 50 mm (abhängig von Material)
- min. Schnittdurchmesser: 3 mm
- Materialien: Wellpappe, Pappe, Graupappe, Plastikbrett, Schaum, EVA-Schaum, Gummi,
Verbundwerkstoff, Textil, Leder etc.
- Multifunktion Werkzeugkopf
- Material Spannvorrichtung über Vakuumtisch
- Wiederholgenauigkeit bis zu 0,1 mm
- Year 2007
- Max.size: 1620 x 2050 mm
- Min.size: 500 x 500 mm
- Laminating station with suction belt table and sliding mark for lateral alignment
- Electronically controlled leading edge unit
- Automatic glue supply
- Bar with stripping needle for processing cardboard carrier sheets, from approx. 400g/sqm upwards
- Short set-up times, as all rollers are centrally and parallel adjustable. Due to the short set-up times, the machine is ideally suited for small and medium runs. Already af...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.