Used Mori Seiki for sale (204)

Condition: like new (used), Year of construction: 2007, operating hours: 36,344 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, feed rate Y-axis: 50,000 m/min, torque: 7 Nm, controller manufacturer: Mori Seiki, controller model: MSX 701III, workpiece length (max.): 500 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 8 kg, total height: 2,970 mm, total length: 4,610 mm, total width: 2,650 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 12,900 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 21,077 h, distance table to spindle center: 830 mm, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, This MORI SEIKI NH5000DCG horizontal machining center has undergone maintenance and mechanical overhaul at our workshop. Following the work performed, leveling, geometry checks, and a general functional test were carried out. The machine is fully operational and available for inspection while running. Key features: Year of manufacture: 2007 CNC: MORI SEIKI MSX 701 III Axis travels X/Y/Z: 730 × 730 × 850 mm Spindle: BT40, 14,000 rpm Table: 500 × 500 mm 2-pallet system with automatic changer Table load capacity: 500 kg 60-position chain-type tool magazine Rapid traverse rates: 50 m/min Chip conveyor Fodpfx Ae Ai T Hzeh Eepp Machine hours: Power-on hours: 50,392 Working hours: 36,344 Cutting hours: 21,077 Main work performed: Disassembly and overhaul of the Z-axis ball screw, with replacement of bearings Replacement of the bearing pair and seals of the loading/unloading operator plate Machine leveling Geometry check General functional test Otto Machine For over 30 years, Otto Machine has been selecting and trading used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Fpjdpez I Ebqefx Ah Ejp

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Horizontal Machine Center DMG MORI NH 5000DCG/40 Fjds Ad Ucijpfx Ah Eepp Year 2010 Tavel X 730 Y 730 Z850mm Fully C axis 0.001 degree MAPPS FAUNC Spindle 14,000rpm 37/22KW 303Nm HSK-A63 Taper 60 ATC Pallet 500 x 500mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CNC: Mori Seiki MSD-501 II Fpjdpfxj Aitlhj Ah Eop Max. turning diameter: Ø390 mm Max. turning length: 400 mm Swing over bed: 680 mm Swing over cross slide: 510 mm X-axis: 235 mm Z-axis: 520 mm Spindle speed: 40-4000 rpm Spindle bore: 65-73 mm Spindle nose: ASA / A2-6 Main spindle motor: 15 kW Machine dimensions: 4000 x 2100 x 2100 mm Weight: 6000 kg.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, MORI SEIKI HORIZONTAL CNC LATHE Fsdpfxj Ad Ubxs Ah Eepp Model : NL2500Y/700 Year 2006 Max Swing Over Bed 925 mm Max Turning Diameter 356 mm Max Turning Length 705 mm Distance Between Centers 700 mm Bar Working Capacity 80 mm Standard Chuck Size 10” • X-Axis Travel: 260 mm • Z-Axis Travel: 795 mm • Y-Axis Travel: 100 mm / ± 50 mm • C-Axis Minimum Indexing: 0.001° • Main Spindle Speed: Max 4,000 RPM • Turret Stations: 12-position bolt-on type BMT turret • Live Tooling Speed: Max 6,000 RPM • Live Tooling Motor: 7.5 hp (5.5 kW) • CNC Control Unit: MSX-850 / MSX-850III (MAPPS III) • Tailstock

Condition: ready for operation (used), Year of construction: 2000, operating hours: 42,887 h, functionality: fully functional, machine/vehicle number: MT-253/1000: 36 / MT253AFK0469, turning length: 1,040 mm, turning diameter: 560 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, travel distance X-axis: 635 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,095 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, feed rate X-axis: 30 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, total height: 3,239 mm, total length: 5,490 mm, chuck outer diameter: 400 mm, total width: 2,978 mm, spindle nose: JIS A2-8, overall weight: 17,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Machine type: Turning and milling center Manufacturer: MORI-SEIKI MT-253/1000 Condition: good, can be inspected while powered on Control: CNC Mori-Seiki MSG-501 (MAPS1) Operating hours: 42887h Max. turning diameter: 560mm Turning length: 1040mm Swiveling diameter: Max. 705mm Spindle-tailstock distance: 1328mm Axis travels: X-axis: 635mm / Y-axis: ±110 mm (220mm) / Z-axis: 1095mm / Rapid traverse: (X/Y/Z) 24/24/30m/min Feed rate: Max. 30,000mm/min Total power: 58kW Weight: 17000kg Dimensions (LWH): 5490x2978x3239mm Main spindle: Turning chuck: Röhm Duro-NC400/3 Speed range: 35-3500/min Main spindle power: 18.5kW / 15kW Spindle nose: JIS A2-8 Spindle bore: 86 mm Spindle bearing diameter: 130mm C-axis division: 0.001° Milling spindle: Spindle speed: 8000/min Power: 7.5kW / 5.5kW Tool taper: Capto6 (C6) Spindle bearing diameter: 80mm B-axis: -120° to +105° B-axis resolution: 0.001° Fodpfx Aho Ai D A Ij Ejpp Number of tools: 42 Max. tool diameter: 80/125mm Max. tool length: 400mm Max. tool weight: 8kg Tool change time: 1.6 sec. Tailstock: Morse taper: MK5 Quill stroke: 150mm Additional information: Chip conveyor: Tsubakimoto, hinge belt Cooling system: Standard (635W / 1040W) Coolant supply: External and through the tool spindle Tool pre-setter: In the machine Bar feeder: Interface only Measuring system: Heidenhain Foot switch for chuck: Double foot switch Foot switch for tailstock quill: Double foot switch Automatic shutdown: Present NC screen language: German PC screen language: German Warning screen language: German Optional sentence masking: Softkey version Programmable data input: Present Number of common variables for user macros: 600 Load monitoring: Present Included with the machine: Various chuck jaws Approx. 30 cutting tools Capto6 Follower points MK5 Manuals and documents Various spare parts

Condition: ready for operation (used), Year of construction: 1986, travel distance X-axis: 160 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, number of axes: 2, Turn-mill centre manufactured in 1986. This MORI SEIKI SL 3 features a maximum swing over bed of approximately 570 mm and a turning length of around 610 mm. It includes a spindle speed range of 30 to 3500 rpm and a turret with 8 to 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 3 machine we have for sale. Contact us for further details. - Max. Swing Over Bed: Approx. 570 mm (22.4 in)- Max. Turning / Machining Length: Approx. 550 - 610 mm (21.6 - 24 in)- Distance Between Centers: Approx. 610 mm (24 in)- Spindle Bore Diameter: Approx. 52 - 56 mm (2.05 - 2.2 in)- Spindle Inside Taper: MT6- Spindle Speed Range: Approx. 30 - 3500 rpm- Spindle Drive Motor: Approx. 11 / 15 kW (15 - 20 HP)- Main Chuck: 3-jaw power chuck- Turret Stations: 8 - 12 stations (Static turning/boring only)- Driven Tools / Live Tooling: No- Sub-Spindle / Counter Spindle: No (Single main spindle with tailstock)- Bed Incline: 45° slant bed design- Power Consumption: Approx. 33 kVA- Machine Weight: Approx. 4200 kg Technical Specification Counter Spindle No Fpsdpfxe Aif Nrj Ah Eep Driven Tools No

Condition: ready for operation (used), Year of construction: 1986, travel distance X-axis: 560 mm, controller manufacturer: FANUC, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI MV JUNIOR was manufactured in 1986. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 460 mm. The machine includes a table size of 900 x 450 mm and a maximum table load of approximately 300 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI MV JUNIOR vertical machining centre we have for sale. Contact us for further details. • X-Axis Travel: 560 mm (22 in) • Y-Axis Travel: 410 mm (16.1 in) • Z-Axis Travel: 460 mm (18.1 in) • Table Dimensions: 900 x 450 mm (35.4 x 17.7 in) • Max. Table Load: Approx. 300 kg (660 lbs) • Spindle Taper: BT 40 / CAT 40 • Spindle Speed: 60 - 8000 rpm • Distance Spindle Nose to Table: 150 - 610 mm (5.9 - 24 in) • Voltage: 200/220 V, 3-Phase • Machine Dimensions (L x W x H): Approx. 2.3 x 1.8 x 2.4 m Fpedpj Aifrzjfx Ah Ejp Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1992, travel distance X-axis: 800 mm, controller manufacturer: FANUC, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis MORI SEIKI MV 40 was manufactured in 1992. It features an X-axis travel of approximately 800 mm, Y-axis travel of 410 - 450 mm, and Z-axis travel of 510 mm. The machine includes a table size of approximately 1100 x 450 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI MV 40 vertical machining centre we have for sale. Contact us for further details. Fpedpfxe Aifrrj Ah Esp • Additional Equipment: Nikken 4th-axis rotary table divider, external tooling cart with toolholders • X-Axis Travel: Approx. 800 mm • Y-Axis Travel: Approx. 410 mm • Z-Axis Travel: Approx. 510 mm • Table Size: Approx. 1100 x 450 mm • Max. Table Load: Approx. 700 kg • Spindle Taper: BT 40 • Spindle Motor Power: Approx. 7.5 kW / 10 HP • Tool Changer Capacity: 30 stations Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Fjdpfewvrfkex Ah Eepp Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: good (used), MORI SEIKI MV-65/50 – Heavy-Duty CNC Vertical Machining Center Technical specifications in English – based on published MV-65/50 machine configurations. Machine designed for large and heavy workpieces, with a rigid construction, large working table and powerful 50-taper spindle. Technical specification Manufacturer Mori Seiki, Japan Model MV-65/50 Fpode Aivg Espfx Ah Esp Machine type Heavy-Duty Vertical Machining Center X-axis travel 1,600 mm Y-axis travel 650 mm Z-axis travel 650 mm Table dimensions 1,700 × 650 mm Maximum table load 2,000 kg Spindle taper BT50 / CAT50, Spindle speed 6,000 RPM, Spindle motor power Approx. 22 kW, Automatic tool changer 30 tools, CNC control Mori Seiki MSC-516 / Fanuc-based, depending on version Machine construction Heavy-duty rigid box-way design Machine weight Approx. 13,300–15,500 kg Machine dimensions Approx. 4,300 × 3,700 × 3,100 mm,

Condition: ready for operation (used), Year of construction: 1990, operating hours: 18,891 h, travel distance X-axis: 135 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, number of axes: 2, Turn-mill centre manufactured in 1990. This MORI SEIKI SL 15 features a maximum swing over bed of approximately 450 mm and a standard turning diameter of around 160 mm. It offers a maximum turning length of approximately 525 mm and a spindle speed range of 50 to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 15 machine we have for sale. Contact us for further details. Control: Mori Seiki MF-T4 (Fanuc-based CNC control)- Run Time (Operating Hours): 18,891 hours, 44 minutes- Part Count: 341,959- Cycle Time: 0 hours, 3 minutes, 40 seconds- X-Axis Travel: Approx. 135 mm (5.3 in)- Z-Axis Travel: Approx. 520 mm- Max. Swing Over Bed: Approx. 450 mm (17.7 in)- Standard Turning Diameter: Approx. 160 mm (6.3 in)- Max. Turning Length: Approx. 525 mm (20.7 in)- Distance Between Centers: Approx. 600 mm (23.4 - 25.4 in)- Spindle Bore: 52 mm (2.05 in)- Bar Capacity: Approx. 45 mm (1.77 in)- Spindle Speeds: 50 - 6,000 rpm- Tool Turret Capacity: 12 stations- Tailstock Taper: MT4- Spindle Motor Power: Approx. 7.5 / 5.5 kW (10 HP)- Voltage: 200/220 V, 3-Phase Technical Specification Fpede Aift Ispfx Ah Esp Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2013, Mori Seiki NLX2500-700SY CNC Lathe with C&Y Axis, Barfeed Unit. (2013), Swing Over Cross-slide 360mm, Maximum Cutting Diameter 366mm, Maximum Cutting Length 705mm, Bar Capacity 80mm, Spindle Speed 4,000rpm, Milling Speed 10,000rpm, Main Spindle Power 18.5Kw, C Axis 0.001 degrees, Y axis -/+ 50mm, 12 Station Turret, Mori Control M730BM, equipped with Toolsetter, Swarf Conveyor, 3 Jaw Chuck, Parts Catcher. S/No. NL254130462. Country of Origin: Japan Fedpfx Ao Ah E Aash Eopp Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. Fedpfj Ahnchsx Ah Espp * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. Fpodpfx Aj Ahnczoh Eep * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. Fedpfxjzg A Sae Ah Eopp The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: used, Year of construction: 2012, turning diameter 465 mm axis distance 1.150 mm control Siemens 840D centre height 360 mm Swivel range via X-slide 465 mm chuck diameter 250 mm travel -x axis 300 mm travel -z axis 1.050 mm rapid power traverse in X-and Z direction 30 m/min Max. workpiece weight – chuck 150 kg Max. workpiece weight – tailstock 350 kg Max. workpiece weight – steady and tailstock 600 kg weight of the machine ca. 7,5 t dimensions of the machine ca. 2,5 x 5,3 x 2,2 m Fodpj Afztwsfx Ah Eopp Equipment/Accessories: - 12-station tool turret (VDI 40 mount) - With 6 driven tool stations (VDI 40 coupling) - Hinged chip conveyor - Reinforced coolant pump (12 bar) - Hydraulic 3-jaw chuck (D 315 mm)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: SL154SY, turning length: 750 mm, turning diameter over cross slide: 510 mm, turning diameter: 680 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 56 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 550 mm, mount diameter: 20 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 550 mm, torque: 70 Nm, bar passage: 56 mm, total height: 2,015 mm, total length: 3,336 mm, total width: 1,873 mm, Equipment: rotational speed infinitely variable, MORI SEIKI SL154SY LATHE WITH LNS BAR FEEDER Fpedpfx Aoxddfveh Eop RENISHAW LASER CHECKED TOOLBOX. MACHINE INSPECTED AND READY TO WORK IN OPTIMAL CONDITIONS.

Year of construction: 2004, condition: good (used), You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár Fsdpfsidqwdex Ah Ejpp

Condition: used, Year of construction: 2006, Chain-type tool magazine: 60, commissioning date: 26.07.2007, scraper-type chip conveyor, spindle max. 14000rpm, NC table with a min. indexing increment of 0.001°, pallet positioning with a minimum angular increment of 0.001° instead of the standard version with 1°, chain-type tool magazine with 60 positions, I/F for 70bar high-pressure coolant system (with side-through spindle coolant supply), DLAB 50F transformer: 54kVA, control options: ATA card, AI Contour Control and Fast Data Server, coolant gun for cleaning workpieces and fixtures, control: MSX-701 III, NC software: G103/02.4, PLC software: I81191A08, MAPPS I98143B47, machining time: approx. 13901h, power-on time: approx. 32187h, weight: 12.4t. Inspection possible by arrangement. Fsdpfe Aiu R Eex Ah Eepp

Condition: ready for operation (used), Year of construction: 2007, operating hours: 21,788 h, travel distance X-axis: 560 mm, controller manufacturer: FANUC, controller model: Series 31i-Model A, overall weight: 9,800 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2007. It features an impressive X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine includes a full 4th axis rotary table and a spindle speed of 14,000 rpm. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details. - Operating Hours: 21,788 h (Machining time)- Rotary Table / B-Axis Indexing: Full 4th axis rotary table (0.001° indexing)- Rapid Traverse Rate: 50 m/min (X / Y / Z)- CNC Control: FS-31iA (MAPPS III)- Display: 15-inch screen / CRT- Spindle Speed: 14,000 rpm (min-1)- Spindle Drive Power: 18.5 / 11 kW (Standard)- Tool Taper: SK40 / No. 40 (7/24 taper #40, MAS grip standard, 90° retention knob)- Tool Storage Capacity: 60 stations - Pallet Size: 400 x 400 mm (Square)- Pallet Type: Tapped hole pattern (TAP)- Pallet Changer: 2-station turn-type APC- Through-Spindle Coolant (IKZ): Side through spindle coolant system (Offered with 40 bar / 7.0 MPa discharge pressure interface)- Coolant Type: Water-soluble coolant- Chip Management: Outside scraper type chip conveyor with drum filter, rear disposal- In-Machine Measurement: Table mount sensor (Metrol)- Supply Voltage / Power Rating: 200 V AC, 3 Phase, 50 Hz (Factory incoming voltage range: 380 V - 480 V via supplied wiring/transformer interface)- Full Load Current: 121 A- Spindle Motor Rated Current: 61 A- Rated Power: 42 kVA- Machine Mass: 9,800 kg Fpedj Ai D Rcopfx Ah Ejp Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM 120-tool changer Coolant pressure: 20 bar Fsdpfx Aozgrzkeh Ejpp Renishaw 3 additional pallets Chip conveyor

Condition: excellent (used), Mori Seiki ZT 1500 YB lathe, year: 2006, including 5 driven tools Fjdpjyyl Itefx Ah Ejpp

Condition: excellent (used), Year of construction: 2008, operating hours: 22,090 h, Machine type: CNC turning and milling center Manufacturer: MORI SEIKI Fsdpfx Ahoz S Rk Hs Espp Type: NL 2500 Y / 1250 Year of manufacture: 2008 Control system: MSX 850 III Technical data: Turning diameter: 275 mm Turning length: 1,298 mm Control system: MSX 850 III Swinging diameter over bed: 923.8 mm Swinging diameter over cross slide: 755 mm Max. turning diameter: 356 mm Max. bar diameter: 80 mm Main spindle: Speed range - main spindle: 4,000 rpm Drive power - main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm C-axis: 0.001° Travel: X-axis: 260 mm Z-axis: 1,345 mm Y-axis: +/- 50 mm Turret: Tool positions: 12 Shank height for square tools: 25 mm Shank diameter for boring bars: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 1,284 mm Quill diameter: 110 mm Taper: MT 5 Rapid traverse: 7 m/min Total power requirement: 38 kVA Machine weight approx.: 7.5 t Space requirement approx.: 5.5 x 3.4 x 2.3 m

Condition: used, Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 ▪ FANUC CNC control ▪ Travels: X 840 mm, Y 840 mm, Z 760 mm ▪ Fjdpfxoywugyj Ah Eopp Milling spindle: 10,000 rpm ▪ Spindle motor power: 30 kW ▪ Spindle taper: ISO 50 (DIN 69871) ▪ Tool magazine with 60 positions ▪ No. 2 pallets, 630 x 630 mm ▪ Full-contouring rotary table (4th axis) ▪ Coolant through spindle, 40 bar with enlarged tank and paper filter ▪ Chip conveyor ▪ Tool presetting/presence probe ▪ Electronic handwheel (MPG) ▪ Weight: 18,500 kg X & Z axes rails and carriages replaced in 2022 Spindle line newly rebuilt in 2024 Tool changer gearbox newly rebuilt in 2024