Machining Center - Horizontal

MATSUURA H.PLUS 300

Condition: good (used), Year of construction: 2004, functionality: fully functional, Model Year: 2004 Width: 500 mm Length: 500 mm Hedjx Tzn Nepfx Ab Isk Height: 500 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (RPM): 15,000 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Hedex A Eupjpfx Ab Isk Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Hjdpfxoxnwy Ij Ab Ijk Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Hedpfxswm D Irj Ab Iok Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Controller MITSUBISHI MELDAS M70 Table size 910 x 400 mm Max. table load 960 kg X travel 760 mm Y travel 445 mm Z travel 520 mm Spindle speed 12000 rpm Tool holder type MAS BT40 Spindle power 22 kW ATC Magazin 22-fold Weight 4400 kg Dimensions LxWxH = 2200 x 2200 x 2700 mm Hsdpfov H D E Sjx Ab Isk Features, accessories - Coolant unit - Chip conveyor - Manuals

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. Hodpfxjxdwaye Ab Ijk The machines are in very good condition, have been regularly serviced, and are ready for immediate use. They impress with their precision, reliability, and compact design – ideal for series production.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm Hedehzbipopfx Ab Iek - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Year of manufacture: 2007 Control: OKUMA OSP P200-M Hsdpfx Aexwtp Deb Ijk Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Magazine with 42 tool stations Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Hedpfx Ajxdc Uvob Isk

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 51/110 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] Hodjvzt Hbopfx Ab Iek - Machine weight : 4300 [kg] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Parts conveying strip - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 2 - Number of fixed tool holders : 4 - Collet chuck : EROWA