Used briquetting presses for sale (100)

Condition: new, 20-26-537/1 FALACH hydraulic briquetting press (new) Type 50 Briquette diameter 50mm Press capacity 40 - 60 kg / hour Briquette length approx. adjustable 35 mm Hopper volume 0.38 m3 Pump motor input 5.5 kW Power consumption 3.8 kW / hour Required input voltage and current 3x400V, 16 A Oil cooler yes Operation continuous Fgodpfxoxrn R Eo Ab Tsk Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 390 kg Price 13 030 Eur (EXW Jonava, Lithuania)

Year of construction: 2023, condition: new, Technical data briquetting press: Throughput capacity: 30-60 kg/h The briquetting capacity refers to a bulk density of the starting material of 200 kg/m³! Motor power: 5,5 kW Briquette Ø: 50 mm weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - inspection cover - Transport pipe holder for briquetting press - Inspection window in the container Requirements for the raw material for briquetting: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 15 mm - Installation temperature: tempered room at least +5°C - The customer must insure himself against hydraulic oil leakage - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the press tools and / or increased wear can be the result The screen from the crusher should not exceed a size of 10/12 mm. Fsdpfxskuz Tue Ab Tegk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FBP 60, total width: 1,280 mm, total height: 1,540 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 1,300 kg, oil tank capacity: 230 l, I am selling my almost new Felder FBP60 briquetting press (50-70kg) with screw gearbox, fill level sensor, and round silo, 3×400V 50Hz 9.0kW, weight 1300kg. Top condition!!!!! Purchased in September 2023. The machine is like new. For sale due to business closure. Viewing possible at any time. Fgodpfxjw H Dulj Ab Tjk

Condition: used, Gross GP 80 briquetting press Fgodpfxexpgyas Ab Tjk Motor power: 7.5 kW, Briquette diameter: 60 mm, Hopper dimensions: 145 x 145 cm Weight: 1200 kg Year of manufacture: 2016

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Fgedpfx Ajxdahyjb Tek Machine weight approx. 800 kg

Condition: repair required (used), Year of construction: 2004, power: 30 kW (40.79 HP), NOT COMPLETE NOT TESTED hydraulic power supply 400V / 50Hz / 70A, capacity 440-500kg/h full automatic Fgedpeqd U Smjfx Ab Tsk

Condition: new, 20-26-537 FALACH hydraulic briquetting press (new) Type Falach 35 Briquette diameter 50mm Press capacity 25 - 40 kg / hour Briquette length approx. 20-40 mm Hopper volume 0.38 m3 Pump motor input 4 kW Fgodpfxexrn Dxs Ab Tsk Power consumption 2.2 kW / hour Required input voltage 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900 kg / m3 Maximum noise level 68 dB Transport dimensions 1860 - 890 - 1100 mm Weight 400 kg Price 11 160 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2015, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 1637, power: 75 kW (101.97 HP), Equipment: emergency stop, safety light barrier, We offer a fully operational briquetting line with a current capacity of 1 ton/hour, producing high-quality cylindrical briquettes (Ø 85 mm), expandable to 2 t/h The line has been in operation since 2015 and is still running – available for inspection in production until end of October 2025. Main equipment (2015 installation): Briquetting press DiPiu MB-90 (Italy) Fully automatic saw for briquette cutting Automatic packaging line (5 pcs = 10 kg bundles) Stretch-film pallet wrapping system 2 × Fiedler boilers, 600 kW each 2 × BS-2 drum dryers Taurus crusher (CZ) Cyclone and dedusting system Digital control & monitoring system by KME Brno (remote monitoring, SCADA type) Upgrades (2018): Star screen system (separating oversized particles from sawdust) Bucket conveyor (feeding raw material from crusher to 5 m³ buffer hopper above press) Additional conveyors between production stages Optional equipment (extra cost): Second DiPiu MB-90 briquetting press available Additional automatic saw → allowing expansion to 2 tons/hour capacity Product quality: Briquettes supplied into major retail chains (e.g. Hornbach) – proven premium quality. Price & conditions: Asking price: E 280 000 (negotiable for fast decision) Availability: November 2025 Location: Volenice, Czech Republic Condition: Used, well maintained, fully operational Reason for sale: Facility to be converted into new metal workshop. Zu verkaufen: Komplette Brikettierlinie – Kapazität 1 t/h (erweiterbar auf 2 t/h) Wir bieten eine voll funktionsfähige Brikettierlinie mit einer aktuellen Kapazität von 1 Tonne pro Stunde, die hochwertige zylindrische Briketts (Ø 85 mm) produziert. Die Anlage ist seit 2015 in Betrieb und läuft noch heute – eine Besichtigung im laufenden Betrieb ist bis Oktober 2025 möglich. Hauptausstattung (Installation 2015): Brikettpresse DiPiu MB-90 (Italien) Vollautomatische Säge zum Brikettieren Automatische Verpackungslinie (5 Stück = 10 kg Bündel) Stretchfolien-Palettenwickler 2 × Fiedler-Heißwasserboiler, je 600 kW 2 × Trommeltrockner BS-2 Taurus-Zerkleinerer (CZ) Zyklon- und Entstaubungssystem Digitales Steuerungs- & Überwachungssystem von KME Brno (Fernüberwachung, SCADA) Modernisierung (2018): Sternsieb-System (Abtrennung von groben Partikeln) Becherwerk (Förderung des Rohmaterials vom Zerkleinerer in den 5 m³-Pufferbunker über der Presse) Zusätzliche Förderbänder zwischen den Produktionsstufen Optionale Ausstattung (gegen Aufpreis): Zweite DiPiu MB-90 Brikettpresse moeglich Zusätzliche automatische Säge → ermöglicht eine Erweiterung auf 2 Tonnen pro Stunde Kapazität Produktqualität: Briketts wurden an große Einzelhandelsketten (z. B. Hornbach) geliefert – nachweislich Premiumqualität. Preis & Bedingungen: Preisvorstellung: €280.000 (verhandelbar bei schneller Entscheidung) Fgjdpfx Aoxga Rtob Tsk Verfügbarkeit: ab November 2025 Standort: Volenice, Tschechische Republik Zustand: Gebraucht, gut gewartet, voll funktionsfähig Verkaufsgrund: Umstellung der Produktionsstätte auf eine neue Metallwerkstatt.

Condition: used, Year of construction: 1997, operating hours: 6,031 h, total width: 1,200 mm, total height: 1,520 mm, total length: 1,600 mm, briquette diameter: 60 mm, overall weight: 850 kg, type of input current: three-phase, power: 5.5 kW (7.48 HP), Good morning, We offer for sale a hydraulic sawdust briquetting machine from the renowned Italian company PRODECO model M60. Below is some useful information about the machine: * briquette diameter 60 mm * 5.5 kW motor * mileage 6,031 mh * hopper with a capacity of about 750 l * capacity about 50-90 kg, depending on the type of sawdust * machine with a controller to set the parameters of work and squeeze depending on the type of sawdust. * possibility of working in manual or automatic mode ( sawdust presence sensor in the tank ) * 1997 year of production * weight 850 kg Fgedpfx Ajq U Dciob Tsk * overall dimensions 120 x 160 x 520cm ( W x L x H ). The machine belongs to my customer at the request of which I sell it. The briquetting machine has undergone a basic inspection in our company, the oil has been changed and for the moment it is operational.

Condition: like new (used), Motor power: 5.5 kW Fodoxcvgvopfx Ab Tegk Briquette diameter: 60 mm Sawdust level sensor Operating hours: 1611 h Hopper diameter: 1000 mm Year of manufacture: 1998 CE marking

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) Fgodpoubb Ubsfx Ab Tek machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Fgodpfx Abjqd Uy Ao Tek Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Condition: used, Year of construction: 2009, SECOND-HAND BRIQUETTING MACHINE PRODECO MOD. L70- CE RULES - Briquet diam. 70mm - Production 50-120kg/h - S/N 89 - Year 2009 (CE) Fgedpowrddqofx Ab Tek - Complete with manual

Condition: used, Year of construction: 2019, Used machine Identical in construction to Weima C 150 Year of manufacture: 2019 1845 operating hours Equipment and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection rating: 400 V +/- 5% / 50 Hz Includes: Press mechanism with filling cylinder, main cylinder, clamping cylinder Connection part for transport line Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Control cabinet and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: shavings, sawdust from solid wood, loose, clean and free from contaminants* Maximum dimensions: 10 mm Throughput performance: approx. 50 m³/year/ * Contaminant specification: Everything except wood, wood pieces larger than 15 mm. The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics! Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler. In case of heat build-up, operating time may be drastically reduced due to increased temperature. With new press clamp Availability: by arrangement Location: Flörsheim Fedpfx Absw Rhk Ds Tegk

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *For sale: Mobile wood briquetting plant. *Ruf RB440 press > 2 hours/1 ton. *Press completely overhauled with all supporting documentation. *Truck roadworthiness certificate (TÜV) valid until Jan. 2026, ready to drive and permitted for use in environmental zones/Green badge/Tax-exempt!!! Special-purpose vehicle—work machine!! *PE packaging bags for approx. 90 tons included. Fedpfxjwhw Syj Ab Tsgk *Hydraulic pump (Linde) > New. *Discharge gearbox > New. *Intake blower motor > New. *Complete hydraulic oil change, 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232 / 335,937 km, year of manufacture: 1990. *Truck with new, reinforced flatbed! Manufacturer: Suhr. *Roadworthiness certificate (TÜV) > New. *Tires (all 6) > New. *Front axle brakes relined. *Sale includes full operation instruction/training. *If interested, please contact by email.

Condition: new, Year of construction: 2024, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. SIEMENS LCD control, maintenance-free operation of the machine. Processed materials: • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens Fedpfxstvmf Ne Ab Togk

Condition: new, Year of construction: 2025, Dimensions: length 1800 mm, width 1800 mm, height 1900 mm . Weight netto 3000 kg. Eletric power of the press: 380 V 50 Hz 33 kW 70-100 A Capacity of the press: 450-500 kg/h Fgsdpfxsc Nb Rfo Ab Tek Pressure: minimum 1000 kg/cm², maximum 1700 kg/cm2 Dimensions of the briquette: length 150 mm width 60 mm height 40 – 105 mm

Condition: excellent (used), The briquetting press has been fully refurbished by the manufacturer. Technical specifications: Briquette diameter: 70 mm Hopper diameter: 1200 mm Maximum briquette length: 70 mm Throughput: ~70 kg/h Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 2100 mm Fgjdpfx Aotianfeb Tjk Height: 1600 mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 Fodpfx Aot U Et Njb Tsgk TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Fgedjt Hagnjpfx Ab Tsk Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition Fgodpfjupwx Hsx Ab Tsk W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 Fsdpfx Aenxkrbeb Tsgk - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Fjdpfjw Ewpgex Ab Tsgk Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Oil temperature sensor Transport pipes Used machine in good condition

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. Fgodsw A Hvdjpfx Ab Tsk The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Fjdpfxovptrts Ab Tsgk Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l New exhibition machine with 5 operating hours